Detailed Motocross Stickers Description:
MOTOCROSS Stickers
Specification:
Remove all existing decals and glue (use a heat gun to remove old decals and a paint safe adhesive remover to remove glue, (citrus based works good).
Clean ski with paper towel and rubbing alcohol.
*Steps 3 through 7 (below) apply to decals that do not have application tape
attached to front of decal. (decals are harder to apply @ 60 degrees or colder use heat source more)
Put 3 drops of dish soap into a spray bottle with 1qt of water.
Spray section of ski where decal is to be applied use lots of water.
Peel decal from backing and spray sticky side of the decal as you peel it use a lot of water.
Apply decal and position it; once in place, use a squeegee or a flimsy credit card to displace the water behind decal, (I prefer the flimsy credit card) if you use a squeegee or something that grips the decal, spray the non-sticky side of the decal so the squeegee slides over the decal (be sure all water bubbles under decal are gone any that are left pop with a small pin, push water out and apply heat).
If you have trouble lining up or arranging decals put multiple pieces on at once but do not squeegee water out, once they are all in place squeegee water out one piece at a time.
The sun, a warm place, or a heat gun will accelerate the drying process.
Trim excess decal if needed with a razor blade (always try let decals dry a little before
- Packing: Export Standard
- Terms of Payment: T/T,T/C
- Delivery Time: 30 Days
- Products ID: 65070
- Product Category: Motorcycle Sticker
- Post date: Mar 18, 2011
Our company is specialized exporter, manufacturer and supplier of Motocross Stickers in China.
Autocar Emblem