 |
|
|
|
| Home / Chemicals / Adhesives & Sealants / Construction Adhesives & Sealants / Pu Foam |
Custom Search
|
| Directions |
| Wear protective gloves, goggles and work clothes during use. Use with adequate ventilation. Optimal temperature for use is between 18C~25C. Clean grease and oil off surfaces to be foamed. Cover surrounding surfaces. Screw can onto gun coupling until it will go no further. Do not over tighten. Grip can and gun with both hands and shake well. Adjust bead with gun regulator screw. Squeeze trigger to dispense foam. Test on experimental surface. Moisten substrate before applying. Dries tack-free in 10 minutes. Cure in 1 hour. Don not disturb uncured foam. Cured foam can be trimmed or sanded. Cured foam exposed to sunlight should be covered with paint or stain. For overnight storage, close gun regulator screw completely to secure trigger. Can must remain fastened to gun during storage. For longer storage consult gun instructions. Use Yuzhong Polyurethane Cleaner to keep dispensing unit working smoothly. Store upright in a cool, dry area. Use remainder of can within 3 days. Uncured foam also may be removed with Yuzhong Polyurethane Cleaner. Cured foam must be removed mechanically. Read all instructions and safety information prior to use of any product. |
| Company: | Fujian Watson Construction Co., Ltd. |
| Address: | Xiajing Village, Jianxin Town, Cangshan District |
| Region: | Fuzhou, Fujian, China |
| Contact Person: | Mr. Eric Chen |
| Telephone: | 86-591-88190260 |