 |
|
Bagged Mineral Desiccant
1) Composed of several natual minerals ; 2) Non-toxic and friendly to environment ; 3) Absolute adsorption rate is up to 50% of its weight ; 4) Moisture adsorption rate: > 40% at 25 degrees Celcius, RH=80% ; 5) Loss on drying: < 2.5% ; 6) Bulk density: 0.75 - 0.95g/ml ; 7) Period of validity: 18 months ; 8) Ingredients: a) SiO2: 65.63% ; b) CaO: 8.83% ; c) MgO: 5.87% ; d) Al2O3: 8.75% ; e) Fe2O3: 0.49% |
|
Fine-pored Silica Gel
Characteristics: Transparent or translucent glass-like pellet or lump. average pore diameter: 2.0-3.0nm. specific surface area: 650-800 m2/g pore volume: 0.35-0.45ml/g. specific heat : 0.92 KJ/kg.℃. thermal conductivity:0.63 KJ/m.hr.℃. [Use]: Mainly used for drying and moistureproof , may also be used as catalyst carriers, adsorbents, separators and variable-pressure adsorbents, etc. Note: qualified ratio of spherical granules is only applicable to fine-pored silica gel |
|
1 - 8mm Spherical Silica Gel Cat Litter
1) Superior absorbency neutralizes odors: this gel can adsorb cat urine, thus keeping the air in your room clean and refreshing ; 2) Can completely adsorb cat urine and liquid waste in very few seconds, leaving the litter dry to touch ; 3) Long lasting: money and labor saving and continues to work for long time (one 4lbs bag cat litter lasts one month for one cat) ; 4) Bacteria resistant: can keep cat litter tray dry by adsorption ; 5) Easy to maintain and clean-up: non-clumping, non-tracking, non-dust, lightweight |
|
Irregular Silica Gel Cat Litter
Specifications: 1) Size: 1 - 3mm, 1 - 4mm, 1 - 6mm, 1 - 8mm, 1 - 10mm, 2 - 8mm ; 2) Packing and size may be customized as per specific requirements. Made in china. |
|
Silica Acid
Shape: irregular grains ; Color: colorless, transparent glass-like ; Insoluble in acids (except for hydrofluoric acid), soluble in caustic alkali solution. Compared with silica gel, it contains more hydroxyls and is a kind of high-purity reagent silica gel ; Use: Mainly used for chemical reagents, fusion agent for processing tungsten filaments ; Technical Data ; Non-volatile substance % Max 0.20 ; Chloride (CL) % Max.0.005 ; Sulphate (SO4) % Max 0.020 ; Heavy metal (pb) % Max 0.005 ; Iron (Fe) % Max 0.005 ; Ignition loss %Packaging: 25kgs bag/ 500 g net per plastic bottle. |
|
Silica Gel Products
Narrow/wide pore silica gel: lumpy/spherical silica gel. Silica gel for drying flowers: Silica gel desiccant; Silica sand with different colors; white, orange, blue etc. There are two kinds of narrow pore silica gel, the lump granule and bulb granule. It is mainly used in drying and purifying the air and kinds of industrial gases: preventing meter instrument, electronic products, equipment fabric, foodstuff, medicine, container and other packed material from moisture and rusting, as well as dehydrating, refinement of organic and so on. Wide pore silica gel varies in size and shape. There are three types: lump granule, bulb granule and micro granule, it is mainly used as a carrier of catalyst. Also it performs the function of selective adsorption and purification in pharmacy, adsorbing the macro-globulin in the industrial ferment processing, adsorbing organic acid and high polymer insulating oils, dehydrating industrial gases, adsorbing the harmful elements in water as well as preventing moisture and rust. Blue silica gel can absorb moisture just as the narrow pore silica gel. It changes color from blue to purple and then light pink while absorbing water. So it not only indicates the humidity of environment, but also tells whether the desiccant to be replaced. It can be used as desiccant independently or together with the narrow pore silica gel. Silica sand is a revolutionary way to solve the problem of pet litter. It can absorb urine or liquid out of solid waste quickly and completely as well as the odor. So it can keep the air in your room fresh and dry. We can supply kinds of packages in order to meet you demands. |
|
Silica Alumna Gel Size 2-4mm,3-5mm
Chemically stable, flame-resisting. Insoluble in any solvent. In comparison with fine-pored silica gel, the adsorption capacity of fine-pored silica alumna gel is quite the same when used at low relative humidity, (e.g., RH=10%, RH=20%), while its adsorption capacity at high humidity is 6-10% higher than that of fine-ported silica gel. Its thermal stability is over 150℃ higher than that of fine-pored silica gel (200℃). Ideally suited for use as adsorbent and Variable-temperature adsorbent. [Use]: Mainly used for the dewatering of natural gas, adsorption and separation of light hydrocarbon at variable temperatures. It may also be used as catalyst and catalyst carrier in petrochemical industry, industrial drier, liquid adsorbent and gas separator, etc. Technical Data: Adsorption capacity: RH=20%min., RH=40%min.,RH=80%min. Specification: 8.5, 18.0; 36.0. Typical values: RH=10%,----RH=43.7, Pore volume, ml/g: 0.4-0.7 , Specific surface area, m2/g: 600-800 , Bulk density, g/L >=: 650, 719 , Ph: 4-8. Qualified ratio of spherical granules,% >=: 80 , Loss on heating, % =<: 3.0, 2.1 , Al2O3 content, %: 0.5-8.0 , [Size] 2-4mm, 1-3mm |
|
Blue Silica Gel
1) Property: a) Can be divided into blue silica gel, chameleon silica gel, and blue silica gel indicator ; b) Appearance: blue, semitransparent and glassy ; c) Can absorb moisture and change color from blue into red with the increase of moisture so as to show the change of humidity. 2) Applications: a) Mainly used as hygroscopic agent and rust prevention for instruments, apparatus and equipment under the condition of closeness, meanwhile visually indicates relative humidity of environment by the color change from red to blue ; b) Widely used as silica gel desiccant for packing in precision instruments, leather, shoes, clothing, food, drugs and household appliance. 3) Sizes: 1 - 3mm, 2 - 5mm, 4 - 8mm. |
|
Silica Gel White
Absorption capacity: Rh=20%:10.0% ; Rh=50%:23.0% ; Rh=90%:36.0% ; Qualified ratio of spherical particle:90% ; Qualified ratio of particle size:98%. Main product specifications: White spherical gel:1-2mm; 2-4mm; 2-5mm; 3-5mm; 3-6mm; 4-8mm; White lumpy gel:0.5-2mm; 1.5-4mm; Packing: 25kg in composite bag, iron drum or cardboard barrel; 12.5kg in iron drum; 500kg in container bag; 20kg in cardboard box; or as specified by clients. |
|
Edible Silica Gel
We can supply you with edible silica gel as desiccant of fruit and vegetables. The specification is as follows: 1.Size: 20um max ; 2.Adsorption Capacity: 80% min ; 3.As: 5ppm max ; 4.Fe: 0.02% max ; 5.Cl: 0.03% max ; 6.Heavey metal: 20ppm max ; 7.Surface Area: 350-460m2/g |
|
High Absorbency Mesoporrous Silica Gel
Appearance: find white odourless powder, free sign of impurity ; Water absorption: 1.2-2.2 ml/g ; Bulk density: 200-350 g/L ; Ph: (5% slurrr) 6.5-8.5 ; Specific surface area: 350cbm/g ; Fe: 80ppm max. ; As: 2ppm max. ; Loss on ignition: (900C degree) 8.3 max. |
|
Orange Silica Gel
Unlike other indicators, this gel uses a kind of non-toxic, non-cobalt organic compound as a discoloring agent. It discolors from orange into green and at last to purple-blue with variations in the moisture adsorption degree. Our orange silica gel indicator has a superior moisture adsorption capacity; discoloring with the increase of moisture adsorption, it is called a "moisture indicator". Specifications: 1) Size: 1 - 3mm, 2 - 5mm, 4 - 8mm ; 2) Packing and size may be customized as per specific requirements |
|
Silica gel (type B)
Silica gel (type B): Appearance: transparent or translucent glass-like pellet or lump ; Color: milky white, transparent or translucent ; c) Pore volume: 0.6 - 0.85ml/g ; Average pore diameter: 4.5 - 7.0A ; e) Specific surface area: 450 - 650m2/g ; Loss on heating: 2.0% (max.) ; Bulk density: 500 - 600g/L ; h) PH value: 5.5 - 7.5 ; Pore structure between macro-pored and fine-pored silica gels ; Application: mainly used as liquid adsorbents, drier and perfume carriers, and catalyst carriers ; Sizes: 0.5 - 1.5mm, 2 - 5mm, 3 - 5mm, 4 - 8mm ; Packing: 15kg/composite bag |
|
Macro pored silica gel (type C):
Macro pored silica gel (type C): Appearance: transparent or translucent glass-like pellet or lump ; Average pore diameter: 8.0 - 10.0A ; Specific surface area: 300 - 400m2/g ; Pore volume: 0.8 - 1.0ml/g ; Specific heat: 0.92kJ/kg.oC ; Thermal conductivity: 0.167kJ/m.h.oC ; Bulk density: 400g/L ; Packing: 15kg/composite bag or 300kg/container bag. |