Insulation & Heat Insulation

PU or PIR Pre-insulated Duct Panel
It's made of a layer of silicate modified fireproof rigid polyurethane, foam coated with aluminum foils, and is a new alternative to galvanized ducts. Easy to install, it has a high density, good insulation, low leakage of air (which saves energy), easy to clean, environment protective, non-itchy, and Freon free. Features: 1) Specification: 4,000 x 1,200 x 20mm ; 2) 80/80um aluminum foil, both sides embossed ; 3) Density: 50-60kg/m3 ; 4) Compressive strength: 200N/mm2 ; 5) Thermal ...

Insulator and Fittings
We can supply the following products for you as per IEC, ANSI, BS, AS, DIN, CAN: 1. Porcelain Insulator: 1.1 45KN-530KN (D.C.) Normal type and Anti-pollution type suspension porcelain insulator ; 1.2 6KV-36KV pin type porcelain insulator ; 1.3 Line& pin post porcelain insulator ; 1.4 Long-rod suspension porcelain insulator ; 1.5 Cross-arm insulator ; 1.6 Stay insulator ; 1.7 Shackle insulator ; 1.8 Spool insulator ; 1.9 Telegraph insulator ; 1.10 Porcelain insulators for earthline Glaze ...
Company: Huzhou Sanhe Insulation Material Factory    China

Hollow Warmth Insulation, Polymer post insulator
Series 50 Hollow Warmth Insulation used for construction insulation applications. Polymer post insulator: Rated polymer pin insulator: Rated voltage:9kv to 36kv. Material: Silicon rubber
Company: Huzhou Sanhe Insulation Material Factory    China

EVA Foam Fireproof Insulation
Epaflex high density cell rubber and plastic fireproof insulation material is produced by foaming quality synthetic elastic mass with sophisticated scientific process, having a structure of highly airtight cells. It has been proven that, with its extremely low coefficient of heat conductivity, epaflex can sufficiently meet the insulation effect in different work conditions and environments. It is an ideal heat-insulating material. Product structure: 1. The advantage of this material over ...
Company: Huzhou Sanhe Insulation Material Factory    China

Rock Wool, Calcium Silicate & Glass Wool
Rock wool blanket: thickness: 25mm to 100mm, width: 600mm, length: from 2.5m to 10m, density: from 40kg/m3 to 130kg/m3,temp. Resistance: from 250c to 750c degree. There are four types: plain blanket, with glass cloth, with aluminum foil, and with wire mesh. Rock wool board: thickness: from 25mm to 150mm, size: 1200x600mm, density: from 40kg/m3 to 180kg/m3, temp. Resistance: from 450c to 750c degree. There are three types: plain board,with aluminum foil, and with wire mesh.Rock wool pipe: ...

Battery Insulation Sheet
1) Material: Toray, Dupont, ITWFormex, GE, NOMEX, Bergquist, etc. 2) Good insulation and flaming characteristics with SGS and UL inspection report. 3) Can be used in batteries, power and all kinds of electron products. 4) Lowest price and superior quality.

110kV Composite Capacitor Bushing
Manufactured by means of injection whole-molding technology. Materials: 1) Silicon rubber for sheds/ housing ; 2) Glass-fiber reinforced epoxy resin rod (ECR type) for core ; 3) Aluminum alloy for metal fittings. Electromechanical specifications: 1) Rated voltage 180kV ; 2) Specified mechanical load (bending): 2kN ; 3) Arcing distance 1370mm ; 4) Creepage distance: 3738 mm ; 5) Total length: 1480mm ; 6) Lightning impulse withstand voltage (Peak value): 750kV ; 7) Wet 1 min power-frequency ...

Fiberglass Fire Blanket
Fire Blanket. Size: 3 x 3m It is a simple and convenient fire-control product with excellent properties of fireproof, heat resistant and insulation

Vermiculite Adiabatic Board
The vermiculite board is made of raw mineral material---vermiculite. They are new, green construction materials without any bad gases and inorganic, associated substance. The vermiculite board is widely used in the first grade fire door, fireproof ceiling, fireproof wall, fireproof roller shutters, fireproof floor, fireproof air pipe, the cladding material of construction steel frame; and also used as heat insulation and preservation materials in boiler, smelting boiler and heating boiler. ...

PVC Insulation Tapes
1) Made from polyvinyl choride (PVC) as backing material ; 2) Coated with rubber pressure-sensitive adhesive ; 3) Resistant to high voltage, fire and weather ; 4) Designed for connecting separated electrical wires for electrical insulating and protection purposes ; 5) Backing: PVC film ; 6) Thickness: 0.12 - 0.20mm ; 7) Tensile strength: >15N/cm ; 8) Extension rate at break: >200% ; 9) 180 peeling strength: <1.5 ; 10) Withstand voltage (5kV x 1min): now-breakdown ; 11) Persistent ...

Epoxy Glass Cloth Laminated Sheet
Epoxy Glass Cloth Laminated Sheet, similar to NEMA Grade FR4, with high mechanical strength at room tmeperature, good electrical propeties under dry and humidity conditions, flame retardant, suitable for mechanical, electrical and electronical applications. Features: 1) UL Reference number: E243249 ; 2) Sheet size: 1020mmX2040mm+/- 10mm, 1020mmX1220mm+/- 10mm ; 3) Color: Green ; 4) Standard: Enterprise Standard

Double-Sided Reflective Aluminum Foil Insulation
1) Keeps warmth in during winter and cools in summer ; 2) Prevents dust and moisture from penetrating inside. Specifications: 1) DFR-1001A: light duty: a) Foil: 7μ ; b) 3-way scrim: 8 x 12 threads ; c) FR adhesive ; d) Kraft: 60gsm ; 2) DFR-2001A: medium duty : a) Foil: 7μ ; b) 3-way scrim: 8 x 12 threads ; c) FR adhesive ; d) PE ; e) Kraft: 100gsm ; 3) Roll width: 1.25m ; 4) Roll length: 60, 120, 300, 500m

Varnish Polyester Sleeving - VTE
1) This polyester fiber sleeving is usually dyed yellow, red, green, blue, white, or black. Usually cut to one meter in length, but also other lengths according to customer needs. 2) Nominal inside diameter: 0.5mm~20.0mm. 3) Maximum working temperature: 120oC. 4) Breakdown voltage: 1,000~4,000V. 5) Resistance to flame: slow burning. 6) Polyester fiber sleeving possesses good qualities of dielectric, excellent tensile strength, softness, and elasticity. Inner packing: Plastic bag: Sizes: 33 x ...

Thermal-Insulated Profiles
These uniquely designed profiles keep the cold away. Even in extremely cold weather, our thermal-insulated aluminum profiles will keep users' homes as warm as in springtime.

PVC Insulated Cable
1) Used in permanent power equipment and lighting installations ; 2) AC circuit ; 3) Rate voltage up to 450/750V ; 4) Highest conductor temperature: 90oC ; 5) Cable installation temperature: not lower than 0oC ; 6) Permissible curved radius (cable outer diameter): smaller than 25mm, not less than 4D cables with outer diameter of 25mm or above (not less than 6D) ; 7) Models: a) 227IEC01 (BV): general single-core copper conductor PVC insulation rigid cable ; b) 227IEC02 (RV): general ...

Cylinder Cap Fuses - RT14
Used in a power distribution installation with rated voltage of AC 380V, rated current up to 63A for overload and short-circuit protection. When combined with a fuse type isolator, the fuse with an electric impinger can be used for phase-lack protection

Porcelain Insulators
We are specialized in the field of manufacturing all kind of porcelain insulators. Also supply foam insulation, aluminum foil insulation, etc...from china.

Ceramic Fiber
Ceramic Fiber Properties: 1. High heat stability 2. Low heat conductivity 3. Resistance to heat shock Usages: 1. Can be lined on the back of kinds of heat oven used in industry 2. Lined in the wall of heat-treated ceramic vault furnace 3. Material for the airtight seal in high temperature, fire-warding board.
Product Group: Ceramic Fiber
Company: Shanxi Nandong International Trading Co.,Ltd    China

Calcium silicate board
The main technical performance of product Item Unit Products JB-T-13 JB-T-17 JB-T-23 JB-T-30 Bulk Weight(max.) ㎏/m3 135 170 230 300 Folding Strength(min.) Mpa 0.2 0.3 0.35 0.4 Compression Strength deform5%(min.) MPa 0.4 0.6 0.7 0.8 Linear drying shrinkage(max.) % 1.5 1.5 1.5 1.5 Heat conductivity(Average temp.70℃)(max.) w/m.k 0.049 0.056 0.062 0.07 Operating temp.(max.) ℃ 850 850 850 850
Product Group: Calcium Silicate Board
Company: Xinmi Jinding Keep Warm Refractory Co., Ltd    China

calcium silicate board
1. Operating temperature: 1050C degree, 850C degree, 650C degree 2. specification: 600*300 or 400*250 *25-115mm 3. density: 230kg/m3
Product Group: Calcium Silicate Board
Company: Xinmi Jinding Keep Warm Refractory Co., Ltd    China

Mineral Ceiling Tiles
1. Detailed product description: 1) Size(mm)(select optional):595x595/605x605/605x1210/600x600/ 600x1200 2) Thickness: 7-15mm 3) Style:Concealed keel system,Mineral fiber for exposed keel system(Tegular board),Composite flattened system, super concealed keel suspension system. 2. Product characteristic: 1) NRC: 0.50 2) CAC: Minimun 30 3) EDGE DETAIL: angle Tegular Square Lay-in 4) Light reflectance: MInimun LRO.80 5) Rh75 performance: Appropriate for relative humidity up to ...
Product Group: Ceiling Panel, Decorative Ceiling
Company: Shi jiazhuang Jinhuan Decoration Material Co., LTD    China

Pure Aluminum Multi Foil Pe Insulation
pure aluminum multi foil PE insulation Specification: Type: Other Heat Insulation Materials ; Color: silver ; pure aluminum multi foil PE insulation IFB can be used to enhance U values in traditional cavity wall construction to meet and exceed current Building Regulations. Intech IFB is a multi-layer air bubble film insulation with aluminium bonded to either one face or both faces. The aluminium is coated with polythene to give durability and corrosion resistance. Therefore creating a ...
Company: Yixing Intech Foil Co., Ltd.    China

Fr-4 , Fr-4
FR-4 Copper Clad Laminate, FR-4 Specification: Type: Other Heat Insulation Materials ; colour: Yellow/white ; Name:FR-4 Copper Clad Laminate Specification: 1220mm*1020mm Thickness: 0.6~2.0mm Copper thickness : 1/3 OZ/ H oz/ 1 oz /2oz /3 oz /5oz Applications: computer communication equipment automatic If you have any question ,please feel free to contact me !
Company: Hangzhou Taiwei Laminated Plates Co., Ltd.    China

High Density Calcium Silicate Insulation Board
High density Calcium Silicate Insulation Board Specification: Type: Other Heat Insulation Materials ; Color: white ; Apparent Density: 250kgs/m3 ; Heat Conductivity: 0.058 ; Highest Working Temperature: 1000 centi-degree ; Material: Calcium Silicate ; HIGH DENSITY CALCIUM SILICATE INSULATION BOARD With density range 800--1000kgs/m3 ,high density calcium silicate insulation board is developed for the non-ferrous industry used for feeding ,casting and molding of molten aluminum and other ...
Company: Laizhou Yongda High Temp. Insulation Material Co., Ltd.    China

Fiberglass Cloth
Fiberglass Cloth Specification: Type: Other Heat Insulation Materials ; weight: 880g/m2: weight: 830g/m2 ; weight: 800g/m2: color: sand yellow ; Highest Working Temperature: 550degree centigra. ; Material: fiberglass ; Fiberglass Cloth It is an ideal high tensile strenght materials with the excellent properties of fire proof, thermal resistant, good chemical resistant,durability. good electrial insulationand will not arise harm to health., also environment proection. Thus becomes the ...
Company: Yuyao Tianyi Special Carbon Fiber Co., Ltd.    China

Lg-standard Type Calcium Silicate Products
HCS-25 LG-Standard Type Calcium Silicate Products Specification: Type: Other Heat Insulation Materials ; COLOR: WHITE ; service temperature: 1000C ; Characterized by exceptional heat resistance, outstanding thermal insulation, very low bulk density, high specific strength, excellent durability and flexible construction, high temperature calcium silicate insulating slabs can be widely used as energy-saving materials for almost all types of industrial furnaces
Company: Laizhou Mingfa Thermel Insulation Material Company Limited    China

Xps Board/building Wall Material
XPS Board/Building Wall Material Specification: Type: XPS Boards ; Size: 600*1800mm; 1200*2400mm ; Thickness: 20-100mm ; compressive strength: above 250kpa ; Product introduction XPS (extruded polystyrene) insulation board is comprised of import polyethylene and manufactured through a special plastic extruction process with high density. It is produced by environmental material, and generates no harmful gas, the leftover material can be reuse, will not be decompose and mildew, ...
Company: Juneng Insulation Materials Co., Ltd.    China

Magnesium Board
magnesium board Specification: The overall product leaves the plant from the raw material to the end product, the entire manufacture process all passed through the strict careful product quality examination, the examination. The product conforms to the national GA160 - 1,998 standards, international ISO0391-1-80 standard and national fire prevention GB8624-1997 standard, The examination conforms to the JC688-1998 stipulation requirement, is evaluated the A level not to burn the material, is ...
Company: Zhangjiagang Shenggang Environment Fire-Proof Construction Material Co., Ltd.    China

Insulation Pu 125mm
Insulation PU Panel 125mm Specification: Panel Material: Metal ; Type: Polyurethane Sandwich Panels ; Technical and suggestion Density of polyurethane is 40-42kg/m3. Thickness(mm): 125mm; To meet the different requirements of customers. Advantage thermal insulation performance, light weight, high strength, corrosion-resistant, anti-aging, beautiful appearance. Polyurethane (PU) panel thickness 75mm 80mm 100mm 120mm 150mm 200mm Max Length 12000mm; Width 300mm/950mm; Angle panel(max) ...
Company: Foshan Baoguan Cold Room & Insulation Panel Factory    China

Ar Fiberglass Reinforcement Mesh
AR Fiberglass Reinforcement Mesh Specification: Type: Other Heat Insulation Materials ; Certification: CE ; Color: red,yellow,blue,etc. ; Properties: good alkaline-resistance, high stre. ; Material: fiberglass ; AR Fiberglass Reinforcement Mesh Features: 1) Uses C-glass or E-glass woven fabric, which is coated with acrylic acid copolymer liquid 2) Properties: good alkaline-resistance, high strength, good cohesion, excellent coating 3) Widely used to reinforce walls and roofs, as well as ...
Company: Jiangsu Jiuding New Material Co., Ltd.    China

Thermal Insulation Material
PB02 Thermal Insulation Material Specification: Type: Other Heat Insulation Materials ; Package: 25kg bag ; Heat Conductivity: 0.034-0.042W/mk ; Highest Working Temperature: 90℃ ; PB02 Thermal Insulation Material TECHNICAL CHARACTERISTICS 1. water resistant 2. Excellent adhesion 3. Good flexural strength 4. Good impact resistance 5. Easy to use WHERE TO USE Thermal insulation material is used as an embedding mortar applied over EPS (expanded polystyrene), XPS (extruded ...
Company: Gomix Building Materials (Guangzhou) Co., Limited    China