Detailed Abs Motorcycles Battery Box Description:
ABS Motorcycles Battery Box
Specification: Usage: Motorcycle / Scooter ; Voltage: 12v ; Sealed Type: Sealed ; Maintenance Type: Free ; Size: AS YOUR REQUEST ; Nominal Capacity: 20AH/H ; Color: Any ; Strength: Good ; Recycling: Good ; Maintenance: Free ;
1. Cleanliness: Bottom tank, roof, roof and cavity wall cover sheet clean and dry, no oil, plastic, wire and other debris.
2. Fineness: Molded inside and outside the surface without stripping marks and strain, without any part of any of the crack.
3. Standard degree: The end of tank, roof, roof cap color and standard color film basically the same (in the bright light from the plastic shell molded case 30 ± 3cm no visible face and the visible color of the yarns.).
4. Protection degree: The end of slot, cover and cover sheet has a protective film protection.
5. Dimensions with degrees:
End of tanks, cover evenly with the gap, the gap is less than 1.5mm in all directions;
Cover sheet and the direction with the gap less than 0.5mm.
6.Impact resistance:
Room temperature: the shot put with a 500g 1500mm and 1000mm respectively, from the slot cover for the end of free fall, look no obvious cracks Molded Case;
Low temperature: The samples were placed in -30°C refrigerator to keep chilled 3 hours, and then samples removed from the refrigerator within 1 minute, shot with 500g of 500mm and 300mm respectively from the bottom slot, site for free-fall, and Molded Case cover without any obvious cracks.
7. Heat resistance: The samples were placed in 70 ± 2 °C constant temperature box for 3 hours, the length, width and height changes of less than 1.3mm.
- Model: 10AH-24AH battery box
- Packing: Export Standard
- Terms of Payment: T/T,T/C
- Delivery Time: 30 Days
- Products ID: 109310
- Product Category: Storage Batteries, Secondary Batteries
- Post date: Aug 13, 2011
Our company is specialized exporter, manufacturer and supplier of Abs Motorcycles Battery Box in China.
