 |
|
4,000lb 12V/24V DC Electric Winch
1) Rated line pull: 4,000lb (18.0kN) ; 2) Motor: permanent magnet, 1.0kW/ 1.3hp (12V), 1.0kW/ 1.3hp (24V) ; 3) Gear reduction ratio: 423:1 ; 4) Cable (Dia x L): Φ7/32" x 52' (Φ5.4mm x 16m) ; 5) Drum size (Dia x L): Φ1.8 x 3" (Φ45 x 76mm) ; 6) Overall dimensions (L x W x H): 12.1 x 5 x 6.3" (308 x 142 x 160mm) ; 7) Mounting bolt pattern: 3.82" (93.5mm) or 4.3 x 4.2" (109 x 106mm) ; 8) Weight: 29lb (13kg)
Company:
Wuyi Xintai Power Tools Co., Ltd.
China [Aug 6, 2008]
|
|
Miter Saw
Name: Dual Slide Compound Miter Saw ; Blade Diameter φ355mm (14") ; Cutting Depth:90º 120 × 310mm/ 130 × 254mm ; Rated Input Power1650w ; Rated voltage220v. |
|
Impact Drill, Cordless Screwdriver
Impact Drill set can be used in a wide variety of applications. Cordless Screwdriver: Voltage: DC 2.4V ; RPM: 150R/ MIN. |
|
Jump Starter with Air Station
NFQ1880 portable power station with air compressor: 1) Built in 12V sealed battery ; 2) 3 DC 12V cigarette plug sockets ; 3) 2 working lights ; 4) Emergency Lights ; 5) Built in 250 PSI air compressor. NFQ2021-24 portable power station with air compressor: 1) Built in 24V 19AH sealed battery ; 2) 3 DC 24V/12V cigarette plug sockets ; 3) 2 working lights ; 4) Jump start power alternating between 12V & 24V ; 5) Built in 250PSI air compressor |
|
Power Tool
1) Tools available: impact drills, angle grinders, jigsaws, planers, circular saws, bench rinder marbles, cutters, rotary hammers ; 2) Rated voltages: 110/230V ; 3) Rated input: 250W - 2000W
Company:
Wuyi Xintai Power Tools Co., Ltd.
China [Aug 6, 2008]
|
|
Angle Grinder
1) Disc diameter: 125 (115)mm ; 2) Rated voltage: 230-110V ; 3) Rated frequency: 50/60Hz ; 4) Rated input power: 710W ; 5) No-load speed: 11,000/min |
|
Electric Mixer
Variable speed: 550 - 750rpm. Rated input power: 700W. Rated voltage: 110 / 220V. Rated frequency: 50 / 60Hz. Inner Packing:Colored carton. Outer Packing:Carton dimensions: 54.5 x 26.5 x 31.5cm. |
|
Power Inverter(150w)
1) Continuous power output: cigarette plug 150W ; 2) Surge power capacity: 300W ; 3) AC voltage output: 220V (or 110V) ; 4) Regulation: 10% ; 5) Output wave-form: modified sine wave ; 6) DC voltage input: DC 12V (10V-15V ) ; 7) Low battery alarm: DC 10.5V 0.5V ; 8) Low battery shutdown: DC 10V 0.5V ; 9) Frequency 1%: 50Hz- 60Hz ; 10) Efficiency: 90% ; 11) No-load current draw: < 0.65A ; 12) Overheat protection: 55 5 Celsius degrees ; 13) Cooling fan: yes ; 14) Input short circuit protection: yes ; 15) Dimensions (L x W x H): 80 x 70 x 42.2mm ; 16) Net weight (approx.): 265g ; 17) Guarantee/warranty. |
|
Circular Saw
1. Rated Voltage: 110/220v ; 2. Rated Power: 1100w ; 3. Rated Frequency: 50/60Hz ; 4. Blade Diameter: 185mm ; 5. Max Cutting Capacity: 58mm ; 6. No-Load Speed: 5500r/min. |
|
Impact Wrench, Hammer Drill
Cordless Impact Wrench: 1) Strong power ; 2) Working with 12V or 18V battery ; 3) Can change the tires, drill the metal. Hollow Hammer Drill: 1) Diameter: 65, 80mm ; 2) SDS shank: 100mm x 2pcs |
|
12-1/2" Planer
1) Motor: 1-1/2HP, 120V, 1PH, 60Hz. 2) Capacity: a) Width of stock: 12-1/2" max (317mm) ; b) Thickness of stock: 6" max (152.5mm) ; c) Thickness of stock: 1/8" min (3mm) ; d) Depth of cut: 1/8" max (3mm) ; e) Length of unbutted stock: 12" min (305mm). 3) Cutter head: a) Diameter: 2" (51mm) ; b) Number of knives: 2 ; c) Speed: 8,000RPM. 4) Infeed rate: 26 FPM (8MPM). 5) Feed rolls: Polyurethane. 6) Table size: 12-1/2" x 9-11/16" (317 x 246mm). 7) Overall dimensions: a) Length: 23-5/8" (600mm) ; b) Width: 19" (485mm) ; c) Height: 14-1/2" (370mm) |
|
Hedge Trimmer
1) Power: 230V 50Hz; 500W, 1600rpm ; 2) Cutting width: 14mm ; 3) Cutting length: 510mm ; 4) Brake function ; 5) VDE plug ; 6) 0.35m cable
Company:
Wuyi Xintai Power Tools Co., Ltd.
China [Aug 6, 2008]
|
|
AC Blower
1) Material of shell: plastics ; 2) Housing protection grade: IP44 ; 3) Power supply: AC 220 ~ 240V/ 50Hz ; 4) Rotating speed: 2800R.P.M ; 5) Installation mode: horizontal ; 6) Applications: widely used in blowing equipment ; 7) Input power: 370W |
|
Air Compressor
1) Voltage: DC12V ; 2) Cylinder diameter: 19mm ; 3) Rated pressure: 250psi ; 4) Rated current: 12A ; 5) Wire length: 2.5m |
|
Electric Chain Saw
1) Skid length: 405mm ; 2) Saw blade speed: 400m/min ; 3) Rated input power: 1400W ; 4) Rated voltage: 110/220V ; 5) Rated frequency: 50/60Hz ; 6) N.W.: 5kg Product Group: Chain Saw |
|
Wall Chisel Machine
Features: 1) Voltage: 110 / 230V ; 2) Frequency: 50 / 60Hz ; 3) Input power: 1200W, 11A ; 4) Wheel size: 125mm ; 5) No load frequency: 0 - 8,500rpm ; 6) Cutting depth: 30mm (125mm using diamond disc). MJ-RH-110: Features: 1) Input power: 230V / 500W - 120V / 4.5A ; 2) No-load frequency: 300 - 3,400rpm ; 3) Working space: 15mm ; 4) Max. cutting capacity: a) Wood (area): 110mm x 110mm ; b) Plastic (diameter): 125mm ; c) Steel (thickness): 3mm ; 5) Curve cutting depth: 50mm |
|
Jig Saw
1) Cutting capacity: 55mm ; 2) Rated voltage: 110V-240V ; 3) Rated input power: 400W ; 4) No load speed: 0~3000r/min ; 5) Net weight: 1.6kg |
|
Punch Down Tool
1) Easy grip handle. 2) Includes 110 or 66 insert and cut blade. 3) Easy to use spring loaded design. 4) Interchangeable blades. 5) Storage compartment for additional blade |
|
Power Sprayer
1) Spraying speed: 800rpm ; 2) Max. spraying flow: 15, 30L/min ; 3) Spray pressure: 2- 3.5kg/cn ; 4) Irrigation speed: 1,400rpm ; 5) Max. irrigation flow: 26, 42L/min ; 6) Irrigation pressure: 10 |
|
Air Stapler
1) Size: 0.95 x 0.65mm ; 2) Length of staple: 6-16mm ; 3) Capacity: 125pcs ; 4) Operation pressure: 0.4-0.7MPa ; 5) Dimensions: 210 x 150 x 50mm ; 6) Weight: 0.8kg |
|
Battery-Powered Painting Roller
1) Battery type: 4 x 1.5V, LR 20 size D ; 2) Running time up to: 15h ; 3) Surface output: 1sqm/min ; 4) Roller width: 6" ; 5) Container capacity: 21 |
|
1/2" Electric Impact Wrench
1) Rated voltage: 120 - 230V ; 2) Rated current: 7.5A ; 3) Rated power: 900W ; 4) Frequency: 60Hz / 50Hz ; 5) NO-load speed: 2,100rpm ; 6) Torque: 210ft.lbs ; 7) Professional quality ; 9) Heavy-duty rocker switch forward / reverse for easy operation ; 10) Metal gear housing for durability ; 11) Easily remove or tighten lug nuts and bolts ; 12) 1/2" square drive, 4pcs CR-V steel sockets: 11 / 16", 3 / 4", 13 / 16", 7 / 8" ; 13) 100% ball and roller bearing construction Product Group: Impact Wrench |
|
Wet Tile Cutter
1. Motor:120 V~, 60HZ ,2HP,15A ; 2. Motor Speed :3500 r/min ; 3. Saw Body Tilting Range: 0 degree - 45 degree ; 4. Blade: Diameter:φ250mm, Bore:φ25.4mm ; 5. Table Size:410X278mm ; 6. Max. Cutting Depth: 60mm(90 degree) 45mm(45 degree) ; 7. Max. Cutting Width: 25.4mm |