surface roughness tester SRT-6210

Home / Electronics & Electrical / Electronic Instrument / surface roughness tester SRT-6210
Custom Search
Detailed surface roughness tester SRT-6210 Description:


1.FEATURES
This instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters.
When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.
* Multiple parameter measurement: Ra, Rz, Rq, Rt * Highly sophisticated inductance sensor
* Four wave filtering methods : RC, PC-RC, GAUSS and D-P
* Built-in lithium ion rechargeable battery and control circuit with high capacity
* Small in size, light in weight and easy to use
* Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the software for RS232C interface.
*Manual or automatic shut down. The tester can be switched off by pressing the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last key operation.
*The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.
*Metric /Imperial Conversion
2.SPECIFICATIONS
Display: 4 digits, 10 mm LCD, with blue backlight
Parameters: Ra, Rz, Rq, Rt
Measuring Range
Ra, Rq: 0.005-16.00um/0.020-629.9uinch
Rz,Rt: 0.020-160.0um/0.078-6299uinch
Accuracy: minus about 10 percent
Fluctuation of display value: Not more than 6 percent
Sensor :
Test Principle: Inductance type Radius of Probe Pin: 5um
Material of Probe Pin: Diamond Dynamo-measurement of Probe: 4mN(0.4gf)
Probe Angle: 90 Vertical Radius of Guiding Head: 48 millimeter
Maximum driving stroke: 17.5mm/0.7inch
Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional
Evaluation length: 5l
Driving speed:
Sampling length = 0.25mm Vt=0.135mm/s
Sampling length = 0.8mm Vt=0.5mm/s
Sampling length = 2.5mm Vt=1mm/s
returning Vt=1mm/s
Profile digital filter
Filtered Profile: PC-R Filtered Profile: Gauss
Non-Filtered Profile: D-P
Resolution : .001μm if reading <10μm
0.01μm if 10μm≤reading<100μm
0.1μm if reading ≥100μm
Evaluation length : 5 cut-off Power Li-ion battery: rechargeable
Operating conditions: Temp. 0~50℃ Humidity <80%
Size:140x57x48 mm (5.5x2.2x1.9 inch) Weight: about 420 g
Attachment:
Standard Sensor RP-100 Groove Stylus SRP-110
curvature Probe SRP-120 Extension Rod SER-150
Mesurement Stand SRS-1 Standard Sample Plate SSP-180
Cable and Software for RS-232/USB) Bluetooth interface

surface roughness tester SRT-6210
  • Model: SRT-6210
  • Packing: carton
  • Terms of Payment: T/T
  • Delivery Time: 7 days
  • Products ID: 44543
  • Product Category: Electronic Instrument
  • Post date: Nov 9, 2010
Our company is specialized exporter, manufacturer and supplier of surface roughness tester SRT-6210 in china.


           

Manufacturer/supplier's information

Company: Guangzhou Landtek Instruments Co. Ltd
Address: Flat C,Kengkou Electronic Base,No.9 Huaxi Rd.Fangcun,Guangzhou
Region: guangzhou, china
Contact Person: cherie
Telephone: 86-020-81609313

Other Products From This Company


surface roughness tester SRT-6200
1.FEATURES This instrument is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in ...

ultrasonic thickness gauge TM-8816
Application: Used for measuring thickness and corrosion of pressure vessels, chemical equipment,boilers,oil ...

ultrasonic thickness gauge TM-8812
Application: Used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil ...

coating thickness meter CM-8856
1. FEATURES a. It meets the standards of ISO2178 and ISO 2361 as well as DIN, ASTM and BS. It can be used both in ...

coating thickness meter CM-8855FN
1.FEATURES * It meets the standards of both ISO2178 and ISO 2361 as well as DIN, ASTM and BS. It can be used both ...

coating thickness meter CM-8828FN
Application:used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storage ...

vibration meter VM-6320
Application: used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. ...

vibration meter VM-6360
Application: used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. ...

shore hardness tester HT-6510A
Application: shore A is designed to measure the penetration hardness of rubber, elastomers and other rubber like ...

shore hardness tester HT-6510F
Durometer Type F is an exclusive design for testing soft cellular materials. The large diameter presser foot and ...

leeb hardness meter HM-6561
An impact body with a spherical test tip made of tungsten carbide is propelled against the sample surface by a ...

ph/orp controller ph/orp-2000
The controller can be used for applications such as water treatment and monitoring, galvanic-decontamination, ...

belt tension meter BTT-2880
Main used in belt tension measurement, can also be applied to measure the tension of objects such as tapes, wires. ...

anemometer AM-4836V
Application: Installation, debug and repair for refrigeration industry, ventilation duct, environment monit-or, ...

anemometer AM-4836C
1. APPLICATION Widely used in data collection for boiler, refrigeration industry, ventilation duct, environment ...

anemometer AM-4838
Application: Installation, debug and repair for refrigeration industry, ventilation duct, environment monit-or, ...

dew point meter HT-6292
Application: widely used in workshops, offices, plants, libraries, computer stations, laboratories and warehouses ...

multifunctional moisture meter MC-7825PS
Application: applicable of wood fiber materials, wooden articles, Chinese traditional medicine, tobacco, cotton ...

multifunctional moisture meter MC-7825P
Application: applicable of wood fiber materials, wooden articles, Chinese traditional medicine, tobacco, cotton ...

MULTIFUNCTION MOISTURE METER MC-7825S
Application: applicable of wood fiber materials, wooden articles, Chinese traditional medicine, tobacco, cotton ...

multifunctional moisture meter MC-7812
Application: applicable of wood fiber materials, wooden articles, Chinese traditional medicine, tobacco, cotton ...

multifunctional moisture meterMC-7806
Application: applicable of wood fiber materials, wooden articles, Chinese traditional medicine, tobacco, cotton ...

grain moisture meter MC-7825G
Application: used for fast and accurate measurement of moisture and temperature in the process of allotment, ...

grain moisture meter MC-7821
Application: used for fast and accurate measurement of moisture and temperature in the process of allotment, ...

humidity meter HT-6290
Application: widely used in workshops, offices, plantes, libraries, computer stations, laboratories and warehouses. ...

stroboscope DT-2350P
any cases to measure the rotational speed of a rotating object and to inspect the defect on its surface without need ...

engine tachometer GED-2600
Application: 2 in 1 (Engine & Laser tachometer ) Applicable to the product departments of motor, fan, ...

tachometer DT-2858
Application: applicable to the product departments of motor, fan, paper-product, chemical fiber, washing-machine, ...

tachometer DT-2857
Application: applicable to the product departments of motor, fan, paper-product, chemical fiber, washing-machine, ...

lux meter LX-9621
Application: widely used in electro-optical sources, research teaching, metallurgy building, industry insp-ection as ...

LUX METER LX-9626
Application: widely used in electro-optical sources, research teaching, metallurgy building, industry insp-ection as ...

sound level meter SL-5868P
Application: it is used to calibrate the sound level meters. This instrument is compatible with several standards ...

sound level meter SL-5858
Application: it is used to calibrate the sound level meters. .It is widely used to test the sound level of ...

sound level meter valibrator ND9
Application:It is used to calibrate the sound level meter Specification Model Nd9 sound level meter calibrator ...

TEMPERATURE METER TM-1310
Application: Used to measure the temperature of liquids, gases, solids and surface temperature. Model: TM1310 1 ...