 |
|
Synchronous Motor
1) Rated voltage: AC 6 - 240V ; 2) Rated frequency:50/60Hz ; 3) Input power: <4W ; 4) Output speed:1.67/2(r/min) ; 5) Output torque(kg/cm):12 ; 6) Rotation firection CW/CCW ; 7) Operation voltage changed with user's demand(AC6-240V) ; 8) Output shaft diameter and length made according to customers' demands |
|
Diesel Engine Water Pump
1) Inlet/Outlet: 80mm (3") ; 2) Total lift(m): 26 ; 3) Maximum capacity(L/min): 1100 ; 4) Engine model: 178F ; 5) Engine: air-cooled, 4 stroke, OHV 25 degrees inclined single cylinder ; 6) Max. Output (PS/rpm): 5.5/3600 ; 7) Displacement(cc): 296 ; 8) Compression ratio: direct injection. |
|
Electric Motor
1) Voltage (V): 220 ; 2) Frequency (Hz): 50 ; 3) Pole: 6 ; 4) Nominal output power (W): 40-60 ; 5) Rated speed (rpm): 800-850 ; 6) Capacitor (uF/450V): 2.5-3.0 ; 7) This fan motor is applied to indoor units of packing type air conditioners |
|
Diesel Engine
1) Type: single-cylinder, vertical, 4-stroke air-cooled ; 2) Combustion system: direct injection ; 3) Bore x stroke: 78 x 62mm ; 4) Displacement: 296cc ; 5) Engine speed: 3000, 3600rpm ; 6) Continuous output: 3.68, 4.01kW ; 7) Maximum output: 4.01, 4.4kW ; 8) Starting system: manual/electric ; 9) Fuel tank capacity: 3.5L ; 10) Lube oil capacity: 1.1L ; 11) Dimensions ( L x W x H): 383 x 421 x 450mm ; 12) N.W.: 33kg ; 13) Power take off : crank shaft or cam shaft (cam shaft PTO rpm is 1/2) Product Group: Diesel Engine |
|
Gasoline Engine and Powder Parts
Gasoline Engine Powder Metallurgy Parts: 1) Material: iron powder metallurgy parts (According to MPIF) ; 2) Density: 6.8g/cm3. Gasoline Engine: 1) Forced air-cooled ; 2) 4 stroke ; 3) OHV single cylinder ; 4) 13hp/3,600rpm |
|
Three-Phase Induction Motor
1) Totally enclosed ; 2) Fan-cooled ; 3) Three phase squire cage induction motor ; 4) IEC standards ; 5) Outstanding performance ; 6) High efficiency ; 7) Energy-saving ; 8) High starting toque ; 9) Low noise ; 10) Little vibration ; 11) Reliable operation ; 12) Easy maintenance. |
|
Rolling Door Motor
KL-JL series of DC electric rolling door motor is the streamlined rolling door motor developed by our company. This machine is better than traditional motor, so the users can install it more easily, operate it more safely. It can also work under low power. It is designed to save power and can save about 60% of power. The machine has two installation styles: right and left. The control system adopts the wired control operation. It is operated by microcomputer controller and the users can also set the storage power. It is used in the place where power is often absent. |
|
Tubular Motor
Features: 1) Voltage: 230V ; 2) Input power: 230W ; 3) Current: 0.1A ; 4) Speed: 17rpm ; 5) Torque: 10Nm ; 6) Working duration:>=4min ; 7) Insulation classification: B ; 8) Protection classification:IP44 ; 9) Max. travel revolutions: 20 ; 10) Min. inside diameter of driving tube: ø46mm ; 11) Outside dimensions: ø45 x 580mm. Certification: CE, TUV. Choose different colors according to the customer's request. Customize different voltage according to the customer's request. Outer packing: 10pcs/carton. Carton dimensions: 620x 400 x 190mm. Product Group: Tubular Motor |
|
Three-Phase Induction Motors
1) Totally enclosed fan cooled 3-phase induction motors ; 2) High efficiency, energy-saving low noise, little vibration, reliable running ; 3) The mounting dimensions and power class are wholly conformed to IEC standards ; 4) Series Y as conventional usage is widely used for driving various kind of machinery, machine tools, pumps, blowers, conveyers, mixers, agriculture machinery and mine machinery ; 5) The power supply: rated voltage 380V, rated frequency 50Hz ; 6) Insulation class B and the protection degree IP23 ; 7) Basic mounting type is IMB3 |
|
125cc Engine
1) Engine type: single-cylinder, air-cooled, 4-stroke ; 2) Bore x stroke: 56.5 x 49.5mm ; 3) Displacement: 124ml ; 4) Max. power: 7.6kW/9000rpm ; 5) Max. torque: 8.5N.m/7500rpm ; 6) Clutch type: wet multi-disc ; 7) Start method: kick-start ; 8) Gearshift mode: 4-speed, non-cyclic ; 9) Applicable motor type: motorcycle |
|
AC/DC Motor
We can supply various large and medium size Motor from china. Motor products include Ac Motor, Dc Motor, Electric Motor, Tubular Motor and more. |
|
PWM Motor Controller for E-scooter, E-motorcycle
1.Current limiting: prevents the motor current from exceeding the specified value thus avoids damage to the motor and the controller due to over-current ; 2.Battery deficiency protection; 3.Power cut-off during braking; 4.Over-speed prevention during electric charging (optional); 5.Suspended terminal easy of connection and reliable (optional); 6.Power relay can be switched off once MosFET demage to prevent hazardous event happen (optional); 7.Speed-Limiting function; 8.1+1 Auxiliary motor drive modefor Intelligent controller to meet with Eurp & Japan market need. |
|
Gasoline Engine Pump
1) 'Tontop' overhead valve engine ; 2) 1.5" suction and discharge ports ; 3) 73 gallons per minute discharge ; 4) Capacity: high output, high pressure pump ; 5) 55psi max. ; 6) 1.5" ports max. |
|
Diesel Engine
1) Type: CM170F ; 2) Bore x stroke (mm): 70 x 55 ; 3) Starting system: electric or by hand ; 4) Fuel tank capacity (L): 2.5 ; 5) Lubrication oil capacity (L): 0.8 ; 6) Displacement (cc): 211 ; 7) Diesel engine models ranging from 170F to 186F |
|
Scooter Motor, Brush Motor
Scooter Motor: 1) Power: 300W ; 2) Voltage: 24V ; 3) Rated speed: 120rpm ; 4) Reduction ratio: 1/33 ; 5) Noise: 58dB. Brush Motor: Suitable for all kind of electric bicycles, scooters and other small vehicles. |
|
Vibration Motor, Micro Motor, DC Motor
We can supply Vibration Motor, Micro Mtor, DC Motor, Coin Motor from china. |
|
Air-Cooled Gasoline Engine
1) Air-cooled, 4-stroke, OHV, horizontal shaft ; 2) Displacement: 270cc ; 3) Ignition mode: TCI ; 4) Compression ratio: 8.2:1 ; 5) Max. output: 9.0HP/3,600rpm ; 6) Max. torque: 1.95kg.m /2,500rpm ; 7) Start: recoil or electric (optional) ; 8) Fuel consumption: 230g/HP.h ; 9) Fuel tank capacity: 6.0L ; 10) Lube oil capacity: 1.1L ; 11) Air cleaner: dual silent (semi-dry) ; 12) Noise level: 81dB A/7m |
|
DC-R Tubular Motor
Tubular Motor: 1) Voltage: DC 12V, 24V ; 2) Power: 10W ; 3) Life weight: 0.7N.m (4.5kg) ; 4) Speed: 36rpm ; 5) Rated current: 0.25A - 0.15A |
|
Blower Motors, Electrical Window Lifters
1) Application: Passat, Audi, Benz, Jetta, Santana ; 2) Specifications: a) Model: 443, 837, 461S ; b) Power: 40W ; c) Voltage: 12V |
|
Gasoline and Diesel Engine
Specifications: 1) Engine type: four-stroke, air-cooled, OHV gasoline engine ; 2) Displacement: 87 - 389cc ; 3) Max. output (hp): 2.4 - 13 ; 4) Ignition system: transistorized magneto ignition ; 5) Starting system: tecoil or electric starter. Features: 1) Low noise level and vibration ; 2) Large, stable power output ; 3) Easy-pull, quick starting ; 4) Low fuel consumption ; 5) Rugged and reliable |
|
4 Stroke 13hp Gasoline Engine
1) Structure: single cylinder, air cooling, 4 stroke OHV, 13HP gasoline engine ; 2) Displacement: 389cc ; 3) Max. power: 9.5kw/4,000rmp/min ; 4) Rated power: 8.5kw/3,600rmp/min ; 5) Max tortile: 19N.m/2800rmp/min ; 6) Igniting way: transistor ; 7) Gasoline engine bore x stroke: φ88 x 64mm ; 8) Starting way: pull with hand (bounce-back starting) ; 9) Sump volume: 1.3L ; 10) Noise: 66dB (7m out) ; 11) Oil box volume: 8L ; 12) EPA arrpoved ; 13) 13HP gasoline engine ; 14) Suitable for use on water pumps, generators and pressure washers |