Detailed Z-wave Wireless Dual Wall Lighting Switch Description:
Z-Wave Wireless Dual Wall lighting Switch
Specification: Operating Temperature: 0-40℃ Indoor use only ; Max. Current: 6A ; Max. Voltage: 230V/50Hz ; Maximum load: 1380W ; Work frequency: 868.42MHz ; Work range: Max 30m ; Certificate: CE, FCC, Z-Wave Certified ;
MODEL NO. TZ66D Z-WAVE Dual Wall Switch (3 wire)
The TKB Z-Wave dual wall switch is switching attached loads and is controlled either by the local switching paddle or remotely via the Z-Wave wireless protocol
It is included and controlled in a Z-Wave network by a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC-software.
Beside the local switch the unit can control other Z-Wave units remotely in up to three additional Z-Wave groups, which are associated with this device.
USE:
Tipping one time or two times the switching paddle performs the control.
The left paddle controls the local load while the right paddle remotely controls Z-Wave associated devices only.
The association of further Z-Wave devices needs to be done by a Z-Wave controller.
The unit is powered by 230V power and needs a pattress box with 230 V power wires for installation.
The unit is shipped completely with electronics, switching paddle and mounting frame in white style. It is designed for use within a 3-wire system, which means that a neutral wire is needed for operations.
SPEC.
Power: 230 VAC, 50 Hz
Signal (Frequency): 868.42 MHz
Maximum Load – Resistive: 6 amps (1380 watts) maximum, 230 VAC
Range: Up to 30 meters line of sight between the Wireless Controller and /or the closest Z-Wave Receiver Module.
- Model: TZ66D
- Packing: Export Standard
- Terms of Payment: T/T,T/C
- Delivery Time: 30 Days
- Products ID: 117488
- Product Category: Remote Control Switches
- Post date: Sep 7, 2011
Our company is specialized exporter, manufacturer and supplier of Z-wave Wireless Dual Wall Lighting Switch in China.
Z-wave Plug-in On/off Module Europe Standard