Detailed Z-wave Wall Switch Description:
TZ66S Z-Wave Wall Switch
Specification: Size: 86*86MM ; Max. Current: 6A ; Max. Voltage: 230V ; Mechanical Life: 15000 ; Maximum load: 1380W ; Work range: Minimum 30m line of sight ; Frequency: 868.42MHz ; Certification: CE, TUV, Z-Wave certified ; Switch paddle: Single ; Material: PC ;
Features:
The TKB Z-Wave dual wall switch is switching attached loads and is controlled either by the local switching paddle or remotely via the Z-Wave wireless protocol
It is included and controlled in a Z-Wave network by a remote control, a wireless control centre or any other kind of Z-Wave controller including a PC software.
Introduction
This Wall Mounted Switch is designed to work with other Z-Wave enabled devices. Z-Wave nodes of other types can be added to the system and will also act as repeaters if they support this function of repeating the signal received to other modules in the system.
As part of a Z-Wave network, the TZ66S will also act as a wireless repeater to insure that commands intended for another device in the network are received. This is useful when the device would otherwise be out of the radio range of the wireless controller.
Technical Data
Power: 230 VAC, 50 Hz
Signal (Frequency): 868.42 MHz
Maximum Load – Resistive: 6 Amps (1380 watts) maximum, 230 VAC
Range: Up to 30 meters line of sight between the Wireless Controller and /or the closest Z-Wave Receiver Module
Wiring diagram
- Model: TZ66S
- Packing: Export Standard
- Terms of Payment: T/T,T/C
- Delivery Time: 30 Days
- Products ID: 117783
- Product Category: Wall Switches
- Post date: Sep 9, 2011
Our company is specialized exporter, manufacturer and supplier of Z-wave Wall Switch in China.
Z-wave Plug-in On/off Module Europe Standard