Lap joint flange

Home / Industrial Supplies / Bellows & Expansion Joints / Lap joint flange
Custom Search
Detailed Lap joint flange Description:


Lap Joint flanges are used on piping fitted with with lapped pipe or with lap joint stub ends. The lap joint flange with the stub end assembly are normally used in systems requiring frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially eases the erection of large diameter or unusually stiff piping. These flanges are also used in applications where there is a need to facilitate bolt alignment.
These type of flanges are similar to slip-on flanges. The only difference is that it has a curved radius at the bore and face to accommodate a lap joint stub end. They may be used at all pressures and are available in a full size range. These lap joint flanges slip over the pipe, and are not welded. They are otherwise fastened to it. Here the bolting pressure is transferred to the gasket by the pressure of the flange against the back of the pipe lap.
Material:
Carbon Steel : ASTM A 105, ASTM A 181
Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys : Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB.
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.
Standard:
ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
DIN :DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
B.S : BS4504 , BS4504, BS1560, BS10
Advantages of Lap Joint Flanges:
Lap Joint flanges have certain special advantages over other flanges. These are as follows:
Lap Joint flanges have the freedom to swivel around the pipe. This facilitates the lining up of opposing flange bolt holes.
Lack of contact with the fluid inside the pipe leads to the greater durability of these flanges.
In piping systems which corrode or erode quickly, the lap joint flanges may be salvaged for re-use.
The pressure-holding capacity of lap joint flanges is little. But it is better than that of slip-on flanges.
The Lap Joint works as a backing ring on the stub.
The main advantage of lap joint flange is that the bolt holes can be aligned with the matching flange after the welds have been completed.
They allow rotational alignment capability.

Lap joint flange
  • Model: Lap joint
  • Packing: Plastic bages/ Plywood boxes/ Bundle/ Shockproof packages
  • Terms of Payment: T/T, D/P, L/C
  • Delivery Time: 30
  • Products ID: 32586
  • Product Category: Bellows & Expansion Joints
  • Product Group: Joint Flange
  • Post date: Mar 8, 2010
Our company is specialized exporter, manufacturer and supplier of Lap joint flange in China.


           

Manufacturer/supplier's information

Company: GZY PipeFitting Industries
Address: No.273, Siping Road, Shanghai, 200081, China
Region: Shanghai, China
Contact Person: Sam Xu
Telephone: 00862133780199

Other Products From This Company


Pipe Fittings
Pipe fittings are widely demanded for any piping and plumbing systems used in industrial and commercial ...

Socket Weld Flanges
Socket welding flange, a popular type of pipe flange, was initially developed for use on small-sized high- pressure ...
Product Group: Socket Weld Flange

Tee, Cross
Carbon steel: ASTM A234 WPB, WPC, ASTM A420 WPL1, WPL3, WPL6 and WPHY-42/46/52/56/60/65/70 Stainless steel: ASTM ...
Product Group: Pipe Tee

Pipe Reducer
An Eccentric reducer, also called a Bell reducer, has two female (inside) threads of different sizes with centers so ...
Product Group: Pipe Reducer

Pipe Flanges
As the mainstay of our business, we are dedicated to providing our customers with all possible options of flanges in ...
Product Group: Butt Weld

Slip-on Flanges
A Slip-On Flange is bored sightly larger than the outer Diameter of the matching pipe. The pipe slip into the flange ...
Product Group: Slip On Flange

Flange bolts
Flange bolts (Special carriage bolts, A286 Flange Bolt) are those type of bolts having a ridge or skirt around the ...
Product Group: Flange Bolts

Wire Seal Flange Gaskets and Bolt Sets
General: Nonrotatable flanges with clearance bolt holes Nominal OD sizes: 12 3/8 to 27 1/8 inches Tube OD sizes: ...
Product Group: Wire Seal, Flange Gasket

Pipe Flange Gaskets
Pipe flange gaskets are used for improved joint performance. They are considered much more superior than the ...
Product Group: Pipe Flange Gasket

Pipe bending
A pipe bending machine is vital component for any pipe bending project, particularly those of a large scale. A pipe ...
Product Group: Bend Pipe

NW Long Weld Neck Flanges
Tube OD sizes: 3/8 to 2 inches Materials: Flange: 304 or 316L stainless steel O-rings: Viton, Buna, & ...
Product Group: Weld Neck Flange

Pipe valve
Pipe valves are a popular category in pipe fittings. Pipe valves are mechanisms or devices to regulate or control ...
Product Group: Ball Valve, Butterfly Valve, Check Valve Gate Valve, Glob

Ball Valves
A ball valve is a type of pipe vale that opens by turning a handle attached to a ball inside the valve. They are ...
Product Group: Ball Valve

Butterfly Valves
A butterfly valve is a rotary motion valve. The main purpose of butterfly valve is used to stop, regulate, and start ...
Product Group: Butterfly Valve

Gate Valve
The gate valve is considered to be the most popular style of valve in the world of flow control. It is a type of ...
Product Group: Gate Valve

Plug Valve
Plug valves are one of the most popular category of pipe vales used in variety of applications. Also known as cock ...
Product Group: Plug Valve

Power Station Valves
All the power station valves we provide are professionally designed and skillfully manufactured. Our power station ...
Product Group: Power Station Valve

Pipe cap
The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of ...
Product Group: Pipe Cap

Orifice flanges
Orifice flanges are used instead of the standard pipe flanges when orifice plate or flow nozzle is used. The basic ...
Product Group: Orifice Flange

Weld Neck Flanges
Weld Neck Flanges are drilled(machined) with the wall thickness of the flange having the same dimensions of the ...
Product Group: Weldneck Flange

Large size steel flange
Large-diameter steel flange is made of carbon steel and stainless steel flanges. Good ductility low carbon intensity ...
Product Group: Flange

U Bend Hydraulic tube
Hydraulic tubes, Hydraulic pipeline, cylinders Pneumatic cylinders, U tube Carbon Steel U Bend Tube are used in ...
Product Group: Hydraulic Tube

Coupling (Full & Half) Fittings
Coupling fittings are used for fluid conduits in which each end portion of two tubes to be connected is provided ...
Product Group: Coupling Fitting

Pipe elbows
Pipe elbows are fitting accessories which are used widely in various industrial sectors in pipe fitting. A pipe ...
Product Group: Pipe Elbow

Blind Flanges
The blind flange is used to close ends of piping systems. It is a kind of round plate with no center hold but with ...
Product Group: Steel Blind Flange

Reducing Flanges
Reducing flanges are designed for use in changing diameters in a piping system. A reducing flange comprises a flange ...
Product Group: Reducing Flange

Spectacle Blind Flanges
Separating one part of a line from another requires a spectacle blind, able to switch from closed to open and back ...
Product Group: Blind Flange

Threaded Flanges
Threaded Flanges are confined to special applications. Their chief merit lies in the fact that they can be assembled ...
Product Group: Threaded Flange