 |
|
Lathe Chuck
Specifications: 1) Cast Iron body lathe chuck ; 2) 3-jaw centering lathe chuck ; 3) 4-jaw independent chuck ; 4) 4-jaw centering lathe chuck ; 5) 2-jaw centering lathe chuck |
|
Casting Iron Machine
The 42" casting iron machine made in our company its producing capacity. Features: 1) Speed of the chain belt: 9.2m/min. 2) Weight of casting iron block: 26kg. 3) Power of the main motor: 45kW. 4) Speed ratio of the speed reducer: i=289.5. 5) Model: roll wheel removing type |
|
Fully Automatic Stretch Blow Moulding Machine
1) 500% manpower saved. 2) 25% electricity saved: very small distance between performs, and 25% more performs can be settled in the preheater than the semi-automatic pre-heater. 3) 20% pneumatic power saved: it adopts sector open-and-close mould system. 4) Speeds up mould. 5) Mold open-and-close speed increased. 6) New concept. 7) High quality and low price. 8) This machine saves time and labor costs because 1 person can operate 5 sets of this machines at the same time |
|
Powder Coating Equipment
The powder coating techniques is mature and widely applied in various industries. But technical innovation never ends. With tens of years of experiences of equipment manufacturing and application, SanLe has developed the energy-saving heating systems, unique multi-track one oven curing systems, high-efficiency powder recycle systems, and simple and practical pretreatment systems which makes SanLe to the advanced position of coating industry. Photo shows the equipment consisting of: 1) XT300.50 suspended conveyer. 2) Spray pre-treatment facility. 3) Combination oven of drying and curingt. 4) Powder coating booth and powder recycling facility. 5) Spray gun and lifter: 2 set with 12 guns each |
|
Spiral Wound Gasket Machine
Flexealing metal bending machine: is one of the subsidiary spiral wound gasket machines, which is used to bend the metal bar into rings to process the reinforced rings of spiral wound gaskets. Flexealing metal grooving machine: is for reinforcing ring of the spiral wound gaskets. It is used to process the male and female form of the reinforced rings. It also can produce large diameter reinforced rings. Flexealing eyelet enveloping machine: is one of the subsidiary graphite sheet gasket machines, which is used to envelope the graphite sheet gaskets. |
|
Engine Lathe
1) Oversized precision spindle with 80mm big thru hole. 2) D1-8 cam lock spindle nose for mounting large-size chuck. 3) Spindle supported at 3-point by large diameter precision bearings. 4) Chrome alloy spindle hardened and precision ground. 5) 400mm wide bed made of fine grain high tensile cast iron. 6) Bedways induction hardened and precision ground. 7) All gears and shafts hardened and precision ground. 8) 4-way rapid traverse to carriage and cross slide. 9) Automatic lubrication in headstock and feed box. 10) Multi-disc clutch for spindle forward and reverse rotation. |
|
Milling and Drilling Machine
High rigidity rectangular table guideways. Automatic spindle feeding. Motor-driven drill press head height adjustment. +/-45° drill press head swivel. Table surface and guilds hardened at ultrasonic frequency |
|
Punching Machine
1) Automatic sequin punching machine. 2) Applications: punch sequins (colored plastic slices) of different colors and shapes on garments, curtain and other ornaments. It is widely applied at sectors of garments processing and embroidery of home textile and other ornaments. 3) Adopts 200V / 50Hz AC. 4) Adjusts punch speed at 0 - 420 times/minutes freely with friction-driving reeling device. 5) Punch times can be set at 0 - 99,999 times at random. 6) Feed device adopts the advanced photoelectric system and tamping device adopts the most advanced mould made of import material which features low noise, long lifespan and quick speed. 7) Adopts fully-enclosed structure and applies advanced plastic-spraying technology on its body and frame as well as adopts adjustable non-fastening chassis. As a result this machine has the characteristic of compact in structure, beautiful in appearance, easy and safe to operate and take up little space |
|
High Frequency Welding Pipe Machine
1) Feeding rack. 2) Storing chamber. 3) Main machine: a) Functions: forming, welding, cooling, diameter setting, correcting, integration. b) Main driving: DC motor. c) Used refined materials and made in high precision. 4) Computer controlled saw |
|
Automatic Pocket Spring Machine
1.CE certified, high safety, compact design, simple to install. 2.Adopt more mechanical motions rather than cylinder motions to ensure working stability and convenient maintenance. 3.Produce center-welded pocket springs that are trimmer and more compact. 4.No spring-upright process, avoiding pocket breakage. 5.The structure and the motion of the heat treatment portion have been improved to avoid miss treatment of springs. 6.Auto stop when no material, spring choked or shield opened. |
|
Lamination Press Line
1 Our products adopt four-column & double points structure, with one promoted cylinder on each of the four columns. The sliding block can be promoted in a large range on the guide pillar by the function of the cylinders. Thus it is convenient to change sub-dies and make some tooling maintenance. 2 We change the traditional crankshaft connecting rod structure to crankshaft sliding block structure of the spindle power structure of the double points, thus it not only increase the rigidity but lay the double power point with a farther distance, which increase the capacity to bear eccentric load in the direction. At the other direction of the slide, namely the direction of the forward and backward guide way, we change the single group roller guide rail guidance to up and down double groups roller guide rail guidance. Because of the long distance of the up and down roller, the guide guidance is with high precision and the capacity of the bearing the eccentric load of the whole press of is very strong. 3 Main parts such as pedestal, upper beam and sliding block of the press are all precision casting formed to fluid state sand. it can keep long-time precision, diminish the noise and make the press with a good shape. |
|
Wire Mesh Machine
We supply and export various wire processing machines, including wire-drawing machine, electric galvanizing machine, barbed wire machine and various wire mesh weaving machine to produce screen netting, square wire mesh, window screen netting, stainless steel wire cloth and brass wire cloth. |
|
C Purlin Pre-Punching & Post Cutting Machine
1) Dimensions: 9,800 x 1,500 x 1,200mm. 2) Weight: 8,000kg. 3) Motor power: 11kW. 4) Roll speed: 11m/min. 5) Thickness: 1.5-3.0mm. 6) Width: 120-300mm. 7) Height: 35-80mm. 8) Forming step: 14 |
|
Spiral Aluminum Flexible Tube Making Machine
This machine is specially for producing aluminum flexible ducts / tubes / pipes with aluminum foil or metallized polyester film and steel wire, for those places where extension, bending and distorting connections are needed. The finished ducts can be insulated with glass wool used in the HVAC system. Specifications: 1) Diameter range: 80 - 600mm. 2) Raw material: pure aluminum foil or metallized polyester film and steel wire. 3) Working speed: 30m/min. We also have another spiral aluminum flexible duct machine with pure aluminum foil. |
|
Crimping Machine / Cutting Machine / Skiving Machine
Crimping machine: a) Capable to crimp 6-wire hose ; b) Capacity up to 4" ID ; c) Shringage force: 720 tons ; d) Die opening and closing: +/-34mm; e) Voltage/power factor: 380V/3-phase ; f) Power: 5.5kW ; g) Frequency: 50Hz or 60Hz ; h) Pressure of oil pump: 31.5MPa ; i) Dies: 15 sets ; j) Dimensions: 950mm (L) x 650mm (W) x 1,750mm (H). cutting machine: a) Application for 2 or 3 braid and 4 wiring hoses. b) Cutting hose range: ≤2" ID ; c) Voltage/power factor: 380V/3-phase ; d) Power: 2.2kW, 1,450rpm ; e) Cutting blade: 350mm (dia.) x 2.6mm ; f) Weight: 70kg ; g) Dimensions: 700mm (L) x 500mm (W) x 850mm (H). skiving machine: a) Cutting hose range up to 2" ID hose ; b) Power factor: 380V/3-phase ; c) Power: 2.73kW ; d) Weight: 50kg ; e) Dimensions: 450mm (L) x 550mm (W) x 600mm (H). hand swage machine: a) Supply with 2pcs crimping jaws ; b) Size: 3/8", 1/2", 5/8" ; c) Crimping jaws for 3/4", 7/8" |
|
Automatic Grinding Machine for Face
1) Outside diameter: 100 - 650mm. 2) Bore diameter: 12.7 - 50mm. 3) Hook angle: -5o ~ +35o. 4) Bevel angle at the tooth face: ±30o. 5) Tooth pitch: 6 - 50mm. 6) Working speed: 10 - 30Teeth/min. 7) Diamond wheel: 125 x 20mm. 8) Grit of diamond: 180# - 400#. 9) Peripheral speed: 30m/s. 10) Connected load: 590W/380V |
|
Colored Steel Roll Forming Machine
1) Total motor power: 13.2kW 2) Main motor power: 11kW 3) Hydraulic station power: 2.2kW 4) Roll station: 16 stations 5) Forming speed: 10m/min 6) PLC control system 7) Roller material: high-grade #45 carbon wrought steel coated with chrome on the surface |
|
Bench Drilling Machine
1) Model: Bench Drilling Machine. 2) Max. drilling capacity: 13mm. 3) Diameter of column: 48mm. 4) Spindle travel: 50mm. 5) Distance spindle axis to column surface: 103mm. 6) Max. distance spindle nose to worktable: 220mm. 7) Max. distance spindle nose to base: 300mm. 8) Spindle taper: B16. 9) Spindle speeds range: 515-2,580mm. 10) Spindle speeds series: 5mm. 11) Dimension of worktable surface: 165 x 162mm. 12) Dimension of base: 290 x 187mm. 13) Overall height: 580mm. 14) Motor: 180W |
|
Steel Wire Rope Pressed Machine
The steel wire rope pressed machine is a new type machine that has been developed by the Juli Group Co., Ltd. for making steel wire rope slings. The press machine is widely used for wire rope industry. It is widely used in China. This press machine with high technology and strength can press good shapes on wire rope slings. It has strong resistance to corrosion and exact dimensions. It has high efficiency. It has features of small volume, lightweight, strong durability, easy to operate and can be applied to any task in its field of operation. It can be applied to oil fields, ports, railways, construction and other related fields. |
|
Tube Groove Machine
1) Inner swelling yarage. 2) AC 220V motor. 3) Self-defined pipe center. 4) Easy operation. 5) Can meet various demands of beveling processing. 6) Tube inner diameter: 65 - 159mm. 7) Tube outer diameter: 65 - 180mm. 8) Max. one-off incision: 3 - 20mm. 9) Radial journey mm/r: 0.15. 10) N.W: 22kg |
|
Aluminium Processing, Rolling Mill
Our main product line includes aluminium continuous caster, aluminium cold rolling mill, aluminium foil roughing and finishing mill, aluminium foil separator, slitting line, cut-to-length line, tension leveling line, model cutting mill and so on. |
|
Square Pipe Polishing Machine
1) Quantity of polishing head: 28-head. 2) Polished pipe range: (F)75 x 45mm. 3) Max. length of polished steel: 6m, can also produce according to your requirements. 4) Charge speed of stainless steel pipe: 1 ~ 20m/min. 5) Diameter of main polishing head's axis: ¢25.4mm. 6) Motor power of polishing head: 3kW. 7) Charge motor power: 3kW. 8) Rotational speed of polishing head: 2,900r/min. 9) Outside diameter of accessory rag wheel: Φ320mm. 10) Roughness of polished surface: Ra0.8 - 0.4/min |
|
Rolling Shutter Door Forming Machine
1) Gear/sprocket driving, 22 steps to form. 2) Main motor: 7.5kW. 3) Forming speed: approx. 12m/min. 4) Thickness: 0.4-0.6mm. 5) Feeding width: approx. 1,000mm. 6) Electric standard: 380V/50Hz/3Ph. 7) Entry bench: un-powered, one unit. 8) Hydraulic cutting device: one unit. 9) Stop to cut, post cut. 10) Pump motor: 3.0kW. 11) Cutting pressure: max. 8MPa. 12) PLC control system: one unit. 13) Control the quantity & cutting length automatically. 14) Combined with: PLC, inverter, touch screen, encoder |