 |
|
Ferro Silicon
We are supplying comprehensive raw materials of welding flux. The specs for ferrosilicon shows as below: Si (%): 43.0-46.0 or 72.0-75.0 ; C (% max): 0.1 or 0.08 ; P (% max): 0.04 ; S (% max): 0.03 ; Mn (% max): 1.0 or 0.3 ; Al (% max): 1.0 or 2.0 |
|
Ferro Vanadium, Manganese Ferro Silicon, Silicon Metal
1) Ferro vanadium. 2) Ferro titanium. 3) Silicon metal 441, 553. 4) Magnesium metal. 5) Magnesium ferro silicon. Made in china. |
|
Crushed Ferro-Titanium Powder
1) Ferro-titanium 30% powder: a) Ti 28-32% ; b) Al max.8.0% ; c) Si max.4.0% ; d) C max.0.1% ; e) P max.0.04% ; f) S max.0.04% ; g) Fe bal. 2) Size distributions: a) +400 microns: 0%; b) +315 microns: max. 2% ; c) -315 +200 microns 15 - 25% ; d) -200 +160 microns 15 - 25% ; e) -160 +100 microns 15 - 25% ; f) -100 +63 microns 10 - 20% ; g) -63 +45 microns 5 - 15% ; h) -45 microns 10 - 20% ; i) Bulk density: 2.65 - 3.10g/cbcm ; j) Moisture: max. 0.1% |
|
Metallic Fiber (Stainless Steel Fiber)
1) Raw material: stainless steel 316L. 2) Antistatic applications: stainless steel fibers in different length, eventually blended with polyester, wool or other fiber. 3) Electro magnetic applications: a) Optimized stainless steel load of thermoplastic granulates, based on PP or PPS ; b) 1,800 filaments roving, impregnated or not ; c) Magnetic or antimagnetic alloys on requests. 4) Physical parameters: a) Exceptional adaptability whilst still offering those properties specific to stainless steel ; b) softness and flexibility ,very smooth surface ; c) Corrosion-resistance ; d) High tensile strength ; e) Crease resistance, electrical conductivity and Magnetic properties ; f) 100% recyclable ; g) The unique cross-section of the fibers has been developed to optimize both the suppleness of the fabrics and the specific exchange surface making it suitable for antistatic as well as high performance filtration applications |
|
Cr20Ni80 Wire
The main chemical composition is Cr and Ni. The max. continuous service of element is 1150. The density is 8 4g/cm3. The melting point is 1,400. The elongation is 20 at least. The resistivity is 1.09 - 1.14 at 20°C. It can be used for making heating element and resistor in metallurgical industry, electrical appliance and machine building industry. |
|
High Carbon Ferro Manganese
High Carbon Ferro Manganese. Specs: Mn: 73-78% . SI: 1. 5% max. P: 0. 3% max. C: 7. 5% max. S: 0. 04% max. Size: 10-50mm 90% min. |
|
Aluminum Extrusion
Specifications: 1) Aluminum sleeve hourglass and stop button ; 2) Din3093 oval sleeve ; 3) Aluminum box, channel section ; 4) Aluminum T bar, tube section ; 5) Aluminum flat bar and beam section ; 6) Material : aluminum alloy |
|
Ferrosilicon
1) commodity: Ferrosilicon. 2) specifications: Silicon:72% - 75.00%min ; Al:2.00%max ; C:0.20%max ; S:0.03%max ; P:0.035%max. 3) size:25-150mm. 4) packing: In 1000kg jumbo bags. |
|
High Carbon Ferro Chrome
1) Available products: stainless steel and spring steel. 2) Specification: a) Cr: ≥60% ; b) C: ≤8.5% ; c) Si: ≤3% ; d) P: ≤0.03%, ≤0.018% ; e) S: ≤0.04%. 3) Size: 10-100mm, 90%min / 10-50mm, 90% |
|
Silicon Carbide
Can supply Silicon Carbide lumps. Silicon Carbide grains, Silicon Carbide powder and other products, the Silicon Carbide lumps detailed specification as follows:1. Silicon carbide in lumps. CHEMICAL ANALYSIS CRYSTAL SHAPE HEXAGONAL SICSpecial Grade MOHS HARDNESS 9.15SIC:98.0MIN, DENSITY 3.20/CMF. C.:0.3MAX CRYSTAL COLOUR BLACKFE2O3: 0.5MAX |
|
Mould Powder/Flux
Our products include: 1) High-carbon billet mould powder ; 2) Ultra-thin slab mould powder ; 3) Mould powder for start casting ; 4) Mould powder ; 5) Steel slab mould powder ; 6) Low Carbon alkalescence covering agent ; 7) Granule non-carbon alkalescence heat-preservation flux ; 8) Special form slab flux ; 9) Plain carbon slab flux ; 10) Ultra-low carbon slab flux ; 11) Machine-made granule flux ; 12) Special flux for pre-fusion |
|
Ferrous Titanium
Ferro-Ti is made by "TiO2" and scrap. Scrap's stabilization is better than TiO2. Tio2: 1) Ti: min. 70%. 2) Mn: max. 1%. 3) V: max. 1.5%. 4) Si: max. 1.5%. 5) S: max. 0.03%. 6) C: max. 0.22%. 7) P: max. 0.03%. 8) Al: max. 5%. 9) N: max. 0.5%. 10) Ti content is optional. Scrap: 1) Ti: min. 70%. 2) Mn: max. 0.02%. 3) Si: max. 0.3%. 4) S: max. 0.03%. 5) S: max. 0.02%. 6) C: max. 0.2%. 7) P: max. 0.02%. 8) N: max. 0.2%. 10) Ti content is optional |
|
Silicon Micro Mist
Silicon Micro Mist-a Ferroalloy By-Product: Which is also called Silicafume or Silicon Micro Mist, is collected and disposed out of the soot together with the exhaust gas by specialized equipment during the process of the high temperature fusion of silicon alloy. Among the soot, the content of SiO2 is over or equals to 90%. The Silicon Micro Mist has a big amount of SiO2 as its ingredient. It is quite steady and the quality index of each component is also quite good practically and is widely used in the water conservancy, hydroelectric and concrete projects. Also most fire-resistant material manufacturers have chosen this product due to its large amount of about 97% of SiO2. |
|
Ferrosilicon
Ferrosilicon Features: 1.Applied mainly to the deoxidization in steel making ,or used as additions of Si element Popular inoculant of grey cast irons,Dl castings and compacting Graphite grey cast irons.Alloying basis and adjustment of inoculants,nodularilizers And graphite compacting agents. 2.Produced from an electric arc furnace of 12500KTA with high tapping temperature And then poured in thin forms after normalizing treatment soundness in microstructure With homogeneous composition and clean surface appearance. Rare-earth Ferrosilicon Features: Produced by one step technique with high tapping temperature. Poured in thin forms after normalizing treatment.Characterized in high reducibility of Si and RE,low harmful elements and adjustable of effective elements |
|
Nanometer Titanium Carbide(TiC) Powder
Main specification: Purity >99%. Dissociative Ti < 0.3%. Average particle diameter(nm):20. Specific surface area(m2/g) > 120. Crystal phase: Hexagonal. TiC is available with stable quality at very competitive price. |
|
Multicolor Coated Steel Sheets
Multicolor Coated Steel Sheets: 1) Made of high quality galvanized panel and colophony dope. 2) Width: 914 - 1,200mm. 3) Thickness: 0.25 - 0.6mm |
|
Tinplate Strip / Coil
Features: 1) Surface: as bright as mirror ; 2) Standard: complies with national standards ; 3) Widely used in home appliances, packaging and vehicle fitting. Specifications: 1) Thickness: 0.15 - 0.4mm ; 2) Width: 150 - 580mm ; 3) Steel grades: SPCC ; 4) Hardness: T2.5 - T4 ; 5) Tin coating mass: 2.8 / 2.8 |
|
Pipe Fittings with Ferrules
1) Nominal pressure: PN 16 - 32MPa. 2) Nominal diameter: 5 - 20mm. 3) Applicable medium: oil, water, gas, and other corrosive, non-corrosive medium. 4) Applicable temperature (C): -20 - 440. 5) Material: 20#, 1Cr18Ni9Ti, Cr18Ni12Mo2Ti, 12CrMoV, 316L. 6) Concerted pipes diameter: 4 - 42mm. 7) End thread: G, ZG, ZM, NPT. 8) Reasonable structure, tight tolerance. 9) Reliable sealing function, long service life |
|
Ferro-Cr-Al Heating Resistant Wire and Strips
Ferro-Cr-Al Heating Resistant Wire and Strips: Iron chrome aluminum resistance has traits of high electrical resistance, small resistance temperature coefficient, high use temperature. With good corrosion-resistance under high temperature, especially apply to air with sulfur and sulfid, it is so cheap that is ideal heating material for industrial electric iron chrome aluminum resistance has traits of high electrical resistance, small resistance temperature coefficient. |
|
Ferro Manganese
High carbon ferro manganese: 1) MN: 75% (min.) ; 2) C: 7% (max.) ; 3) SI: 1.5% (max.) ; 4) P: 0.25% (max.) ; 5) S: 0.03% (max.) ; 6) Size: 10-50mm / 10-60mm / 10-100mm 90% (min.). Medium carbon ferro manganese (type 1): 1) MN: 75% (min.) ; 2) C: 2.0% (max.) ; 3) SI: 2.0% (max.) ; 4) P: 0.3% (max.) ; 5) S: 0.03% (max.) ; 6) Size: 10-50mm / 10-60mm / 10-100mm 90% (min.) |
|
Si-Ca Alloy
We are in strong position to supply Si-Ca alloy with Calcium content ranging from 31-33% min and silicon content as 55-65%, lumps, grannues and powder are available. Supply from china. |
|
Calcium Silcion
We can supply you calcium silicon. 1. Ca 28.0% min. SI 55-65% AL 2.4% max. C 1.0%max. 2. Ca 30.0% min. SI 55-65% AL 2.0% max. C 1.0% max. Size: Under 40 mesh,0.2-2mm,1-3mm,20-60mm,10-50mm |
|
Ferroalloy
Ti 68-72, Al 5% max, SI 2% max, C 0. 2% max, Mn 1. 5% max, P 0. 05% max, S 0. 05% max, Cr 1% max, Pb 0. 01% max, Sn 0. 05% max, Zr 0. 05% max, Size 0-100 mm |
|
Radiant Tube and Strip
This product's wire posses the characteristics of high resistance, low temperature coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature, especially under the atmosphere containing S, as well as the lower price, it is widely used in industrial electric furnaces, household electrical appliances and other electrical equipment. |
|
Machined Aluminum Part
Specifications: 1) Material: aluminum, carbon steel, bronze. 2) Product weight: from 0.01kg to 10kg. 3) Main equipment: numerically controlled drill machines, numerical controlled milling machines, machining centers. 4) Main product using area: laser equipment, textile industry, food industry, automobile industry, ship fittings, diesel engine parts. 5) Surface treatment: plating with zinc, chrome and nickel, sand blasting, anodizing, sand blasting |
|
Femo-Ferro Molybdenum
FERRO MOLYBDENUM 65-70% (FeMo). CAS Nr. 7439 98 7. HS 2000: 720270 Ferro Molybdenum. Chemical Analysis-FeMo. Mo 65 to 70%. Cu max 0. 5%. P max 0. 05%. S max 0. 12%. Si max 1. 2%. C max 0. 05%. Material consisted rough surface pieces of dark grey colour. Properties Density: approx. 8, 8 g / ccm. Bulk density: approx. 4, 0 g / ccm. Approx Melting range: 1800 to 1950 degree C. Particle sizes: 20 to 50 mm |
|
Ferro Phosphorus
Ferro phosphorus. Phosphorus(P):23 - 28%. Silica(Si):2.0% max. Carbon(C):0.5% max. Size:10 - 50mm,90% min. Packing: In plastic woven bag of 1MT net |
|
Alloy Wire
Specifications: 1) Types: W3Re / W25Re, W5Re / W26Re. 2) Grade I: a) Diameter: 0.1mm, 0.25mm, 0.5mm ; b) Working temperature: 1,200 - 1,800oC ; c) Tolerance: ≤ ± 0.25%t. 3) Grade II: a) Diameter: 0.25mm, 0.5mm. b) Working temperature: 0 - 400oC, 400 - 2,300oC. c) Tolerance: ≤ ± 4oC, ≤ ± 1%t |
|
Ferro Sulphur / Iron Pyrite / Fes
S content 47% min ; Fe 42% ; SiO2 0. 3% max ; As + Pb 0. 1% ; Zn 0. 1% ; Size: 10-60mm ; 20-80mm ; 30-120mm ; 200mesh ; 325mesh ; 0. 8-10mm |