 |
|
Heat Joining Machine
Bond up disjoint flat painting surface made of heat-melted material, such as PVC cloth, PE fabric canvas, outdoor poster banner, plastic surface and sailcloth. Specification parameter. 1) Alternant electric voltage 220V/50Hz. 2) Upper limit power 2,000W. 3) Adjustable work temperature 50-600°C. 4) Adjustable self-move speed 0.8-15m/per minute. 5) Whole weight 10 kilogram. 6) Dimensions: 400 x 300 x 280mm |
|
Dying Bobbin
We are specializing in supply the plastic bobbins for yarn cheese dyeing which is being used in dyeing factories all over the world. If you want the highest grade dyeing and the improvement of dyeing quality, please do you feel your satisfaction with our special plastic bobbins for cheese dyeing which is being manufactured by us. |
|
Leather Embossing Machine
1) Expansion controllable, temperature adjustable, heat source automatic control after presetting, double working position winding, finish the product process in one time with the help of the selvage cutting off device. 2) Technical data: a) Production speed: 0 - 20m/min. b) Width of the working rolls: 1,700mm. c) Width of products: 1,520mm. d) Heat source: heat-conducting oil and infrared quartz electric heat tube |
|
Production Line
1) Usage: useable in the weaving such short fibers as polyester, polypropylene, polyamide fibers and three dimension central hollow fibers. 2) Turnoff fiber number: 1.4 - 15 denier. 3) Spinning velocity: 600 - 1,400m/min. 4) Spinning distance: 480mm, 1,250mm every node. 5) Spinning digit: 8 digit, 10 digit,16 digit, 20 digit, 30 digit. 6) Wire draft velocity of back spinning: maximum 300m/min, normal 180 - 220m/min. 7) Draft multiple: three to five times. 8) Transmittal drive form: transmittal by single machine. 9) Fiber cutoff length: 32 - 120mm |
|
Acrylic Fiber Production Line
1) Uses: wet spinning of acrylic fiber and spinning bi-component carbon filaments 2) Mode: horizontal individual bath setting, double bath turning, left and right handed 3) Spinning post center distance: 330mm 4) Spinning speed: 154m/min for 3d 5) Capacity: 1,500t at 154mm/min for 3d. 6) Cold drawing times: 1.49 - 2times 7) Water washing: upper, middle and lower floors 8) Acid washing: single-floor bath. 9) Hot drawing times: 4.5 - 5 times 10) Drive: all by inverter |
|
Cloth-Adhesion Machine
This machine is controlled by multifunctional computer, combining with light, mechanical, electrical and pneumatic functions used in the textile industry. It can hot press two kinds of same or different cloths (silk, cotton, wool, villus, mixed textile) into one type by special glue according to tiny spraying technology. This kind of cloth is uneasy to separate with soft felling. This equipment consists of rolling device, spraying glue fitting, composite fitting, programmable logic control, display screen, frequency conversion timing device, light and electrical auto-subtense device, triple tension control and tiny spraying device. It adopts touch operation with multifunction display and accurate self-diagnose. With reasonable structure, easy operation and high efficiency, this machine enjoys a good reputation in the textile industry. Technical parameters: 1) Max. cloth width: 2,100mm. 2) Max. capacity: 25m/min. 3) Max. rolling diameter: 1,000mm. 4) Dimensions (L x H x W): 10,200 x 3,800 x 2,200mm. 5) Weight: 12,000kg. 6) Power: 380V, 50Hz, 70kVA |
|
Dyeing Machine
1) Both the high temperature and normal temperature dyeing procedures can acquire the ideal quality effects, which have replaced the traditional single-use dyeing machine. The multiple purposes of one machine have saved the factory building area, raised the equipment utility and reduced the equipment investment. 2) The dye liquid after the compulsory recycling corrosion resistant pump can pass the super-low pressure nozzle, flow to the cloth storage trough through the tube, and repeat such recycling to drive the operation of the fabrics until the completion of the whole dyeing process. 3) The required nozzle pressure and appropriate liquid flow can be obtained through regulating the nozzle gap. The cloth speed can be adjusted within the range of 60-300m/min, with the bath ratio of 1:7-10. Proper bath ratios can be chosen according to different fabrics. 4) It can be operated conveniently and flexibly, manually or automatic controlled. Customers can make their choice according to the actual conditions in their order |
|
Fully Computerized Single Cylinder Socks Knitting Machine
The Jinhao machine GD-WJF is a single cylinder machine with 1 feed, for the production of high quality socks with patterns in multiple colors, in a wide range of gauges. It is possible to produce socks with 5-colors patterns plus ground color in the same course, for a total of 15 colors plus 2 ground colors on the sock. The patterns can be made on the entire sock. It is possible to make patterns with 4 colors plus the ground color on the elastic and also socks with 3-dimensional patterns. Features: 1) Socks in plain mesh, normal terry and sandwich terry, in 5 colors plus the ground color. 2) Needle-by-needle selection with electronic actuators. 3) Double welt in tuck stitch plus 5-colors patterns. 4) Make the design in computer and input use floppy disk. |
|
Terry Wheel Machine
This machine uses the pattern wheel principle to select sinker, and doesn't make jacquard knit effect through 2 different thickness facings for each yarn sinker. This product can brush polar fleece for thermal underwear and thin blankets. Features: 1) Pattern area: 192 x 96cm. 2) Adaptive materials: pure cotton, chemical fiber, blending, silk. 3) Diameter: 30" - 34". 4) Feeder: 48F - 52F. 5) Gauge: 18G - 24G. |
|
Electronic Jacquard Rapier Loom
This jacquard rapier loom is mainly used for weaving various kinds of jacquard decorative cloth, sofa cloth, trademarks, neckties and towels made of natural fiber (cotton, wool, silk and flax), artificial fiber and synthetic fiber. It is a high-speed electronic jacquard loom. It is fast, steady and flexible, since it adopts high speed electronic jacquard. All different flowers can be designed by the software and can be manufactured by this rapier loom. Specifications: 1) Breadth: 190 / 230 / 250 / 280 / 320 / 360cm. 2) Tallest into latitude rate: 700m/min. 3) Yarn count: a) Cotton: 7Ne - 60Ne ; b) Wool: 12N.m - 100N.m ; c) Chemical fiber: 1,000D - 65D. 4) Rolling-up: mechanic roll-up or electronic roll-up. 5) Let-off: mechanic let-off or electronic let-off. 6) Beam flange diameter: 800mm. 7) Max. rolling diameter: 600mm. 8) Weft-selection: 2 - 8 colors pick-at-will. 9) Head needles: 1,344; 2,688; 6,144; 12,228. 10) Power: <5.5kW. 11) Control: micro-computer control, Chinese LCD screen display
Company:
Zhejiang Suretop Textile Machinery Co., Ltd.
China [Aug 12, 2008]
|
|
Mixed Embroidery Machine
1) 6 needles ,15 heads. 2) Head distance:450mm. 3) Embroidery area:800*850mm. 4) Power input: 220V single / 380V three phase, 50Hz / 60Hz. 5) Power consumption: 1.2-1.5kW. 6) Configuration: a) Dahao computer: 5 inches /10 inches ; b) Servo motor: Panasonic ; c) Stepping motor: 3-phrase/ 5 phrases ; d) Hook (made in Japan), bobbin case (made in Japan). e) Encoder. f) Belt.
Company:
Zhejiang Suretop Textile Machinery Co., Ltd.
China [Aug 12, 2008]
|
|
Single-Needle Quitling Machine
1. Adopt advanced outsize chainstitch sewing, auto thread-breaking checking and quilting. The presser foot can be adjusted to different thickness. 2. Equipped with high-capacity computer that can deal with various kinds of complicated patterns. Can run by continuous or interval way according to fabric and processing requirement. 3.360°-jump quilting, can sew hundreds of patterns, the maximum storage of patterns reaches 200. 4.Equipped with functions such as shift output counting, total output counting, pattern effect display, processing locus display, thread auto-cutting, needle auto-lifting, auto-stop when thread-breakage, etc. 5. Online vectorial angle correction and return parameter correction. 6. Adopt Japan servo motors for controlling ensuring more precision. 7. Low noise, low vibration, stable performance. 8. Special pattern-designing software can be exerted. Scanner-input can also be realized. 9. Auto cloth-feeding, pulling and cutting. |
|
Automatic Widening Flat Knitting Machine Frame
Functions: 1) Automatic widening. 2) Automatic expanding (while widening). 3) Automatic shortening (while hand narrowing). 4) Automatic changing yarns with two colors. 5) Automatic changing knitting speed. 6) Automatic stopping knitting for coarse knots and ending out. 7) Automatic counting to stop knitting (the middle or side stop position can be set). 8) Automatic drawing and rolling. Features and specifications: 1) Needle bed width: 36~42", 44~52", 52~56". 2) Six (from 1 to 6) adjustable speeds can be selected depending on different knitting materials, knitting width and technology requirements. 3) The frame head can reverse at lower speed automatically while converting so the impulsive force is slowed down to the greatest extent. 4) If you use our machines, you can lower 70% labor intensity for the workers, improve 20-30% labor productivity and product quality is visibly optimized. 5) The technological program is simple and easy to learn. There are 40 technological programs in the internal memory and external card memory is equipped. You can directly recall saved programs |
|
Weft Feeders
Applicable Machine Type: Rapier Loom, Segment Shuttle Loom; Weft Range: Cotton, Wool, Linen, Silk, Chemical Fibre; Yarn Count Range: 4Nm~8den; Weft Feeding Speed: ≤1100m/min; Speed Control: Automatic Change Frequency; Rotate Direction: S/Z shiftable; Yarn Storage Control: Adjustable Yarn Separation: ≤2mm. |
|
Ring Frame
1) It can be used for spinning fibers of cotton, cotton and chemical fiber blends, medium and long chemical fibers under 65mm. 2) No. of spindles: 504, 492, 480, 456, 420, 408, 396, 384, 96. 3) Counts: 6 - 96 tex. 4) Spindle gauge: 70mm. 5) Steel ring dia.: 38mm, 42mm, 45mm. 6) Tube length: 205mm, 230mm. 7) Roller dia.: 25mm for top, middle and bottom roller. |
|
Polyester Stable Fibre Production Line
1) Uses: Manufacturing of polyester, polypropylene, polyamide, and 3-dimension hollow fibers. 2) Mode: Single sided and left and right handed. 3) Product fineness: 1.5 - 15d. 4) Spinning speed: 600 - 1200m/min. 5) Spinning space length: 750mmu. 6) Spinning position: 4, 6, 8, 12, 16, 24, 32. 7) Drawing speed: 280m/min (max), 240m/min |
|
High-Speed Single-Side Knitting Machine
1) Fits to weave long or short fibre, twining electron plush, thick plush, diamond plush, single side brush felt, double brush felt, poodle cloth and colorful cloth. 2) Used for making infant wear, children's wear, adult's wear, topping dresses, sportswear, skirts, foreign dresses, business suits and others industrial cloth, due to its low waste, clean cloth cover, fast circle and identical length. 3) Mixed with polyester fibre, can weave spring lylra cloth. Specification: 1) Cylinder diameter: 26 - 34''. 2) Feeder: 60 - 68. 3) Guage: 18 - 28g. 4) Horsepower: 3.75HP. 5) The yarn, frame of cloth and space between two needles can influence speed |
|
Fully Automatic Washing Shrinkage Tester
Fabric testing systems. Accelerated washing and drying apparatus for knitted and woven fabrics to assess shrinkage in accordance with international test methods. Also useful for assessing fabric stability, color fastness, finish durability. Spirality and pilling to washing / drying. Complete washing and drying cycles in less than 15 minutes. Fitted with stainless steel basket with 5 sample chambers keypad control of test parameters with manual or automatic operation. Hot and cold water supplies, drainage and compressed air required |
|
Fancy Twister
Features: 1) PLC controlled, simple operation and convenient changing of fancies. 2) The center thread and molding are formed through controlling rollers, fast knotting equipment, upper false twisting spindles, hollow spindles, lower false twisting spindles, take-up roller and winding drum. 3) Among fancy yarn equipments, this machine is an ideal model. Specifications: 1) Type: two sides and single shelf. 2) Spindle pitch: 210mm. 3) Spindle number: 112. 4) Spindle speed: <12,000. 5) Number of twists: 300 - 1,600T/m. 6) Rotary speed of upper false twister: <30,000rpm. 7) Rotary speed of lower false twister: <23,000rpm. 8) Maximum take-up speed: <30m/min. 9) Applicable weaving titer: 4 - 60Nm. 10) Motor power: 17.25kW. 11) Weight: 40,00kg |
|
Warp Knitting Machine
1) Wide for its work: 1,700mm. 2) The number of stick: 4. 3) Warp beam flanges measurement: 450 (OD) x 150 (OD) x 90 x 366 (width). 4) Speed: 300rpm. 5) Free spare parts list: a) Warp beam flanges (8) ; b) Latch-needle die (1) ; c) Bearded needle (10) ; d) Guide threading (4) ; e) Folded-chain block (150) ; f) Pliers (1) ; g) Tool box (1). 6) Weight: 2,700kg (gross weight), 2,200kg. 7) Work output: 1,200 mufflers/day. 8) It is the latest warp knitting machine for scarf knitting. 9) The specification is that many patterns can be made with high productivity, one scarf within three minutes. 10) Jacquard and tassel can be made automatically with programming. 11) With modification.
Company:
Zhejiang Suretop Textile Machinery Co., Ltd.
China [Aug 12, 2008]
|
|
Pile Loop Raschel Machine with Two-Needle Bar
Application Area: Weaves the three-dimensional pattern lace, net hole curtain, table cloth, clothing fabric, back rubbing turban, sauna turban. Technical Parameters. Guiding bar:2pcs. Jacquard:2pcs. Workpiece width:130", 178", 205". Speed:250r/min. |
|
Sizing-Dyeing Machine
This machine is suitable for dyeing and sizing of denim yarns. The warp boiling, dyeing, oxidizing, washing, sizing, drying and winding by this machine meets requirements on dyeing and sizing for various thread counts. Through proper modification this machine is also suitable for curing, dyeing and sizing. Main technical specifications and parameters: 1) Working width: 1,800mm for warp beam creel, dyeing, sizing and drying. 2) Nominal width of head-end: 2,800mm. 3) Diameter of warp beam flange: Φ550~1,200mm. 4) Speed of dyeing section: 35m/min. 5) Speed of head-end: 40m/min. 6) Max. working pressure of drying cylinder 0.36MPa. 7) Operation pressure: 0.20~0.25MPa. 8) Air pressure of size box: max. 0.60MPa. 9) Max. squeezing pressure for front squeezing roller 15kN. 10) Max. pressure of squeezer ofrear squeezing roller: 40kN. 11) Temperature of size box: 95~98°C. 12) Length of yarn storage shelf: 120m. 13) Max. winding tension of warp beam: 5kN |
|
Automatic Cutting and Sewing Machine
It is equipped with computer-controlled system and featured with high output, low noise, easy operation, safe protect, long life spare parts and energy saving. Used to cut and sew woven bag from woven fabric made by circular loom. The woven cloth will be automatically thermally cut a fixed length and sewed. At the same time labor-saving can be realized. Transmitted by serve motor, the length of bag can be precisely controlled. Sticking is avoided after the bag being thermally cut off and easy to open. The machine will stop automatically when the cloth is covered. The running method is either manual or automatic. Pneumatically driving is adopted in cloth releasing and can be easily operated. |
|
Automatic Tubular Embroidery Machine
1) Built-in 3.5" floppy disk driver with the ability to read Tajima and Barudan designs. 2) Memory capacity is 1,000,000 stitches, which can store up to 99 designs. 3) Accommodates embroidering on T-shirts, sweaters/ sweatshirts, tubular, caps and most fabrics. 4) With the ability to rotate, copy, delete, scale up/ down, edit and output designs. 5) Automatic returns to the suspension point after power failure. 6) With the function of setting scale-limit in the software, which is more convenient for cylinder embroider |
|
Compound Twisting Machine and Winding Machine
Our company mainly produces R series machines of one-step twisting for composite yarns, including ZR98 one-step twisting machines, ZR2001 series numerical controlled one-step twisting machines, ZR2002 computerized flanged-bobbin high-speed winders and RZ2004 high-speed winders. Our products have passed provincial-level test issued by the Provincial Center of Technical Supervision. |
|
Computerized Multi-Needle Chain Stitch Quilting Machine
1) Widely used to quilt high quality mattresses, quilt covers and household ornaments. 2) Pattern-combining function. 3) Suitable for very thick materials. 4) Automatic thread-cutting and automatic stop in case of thread-breaking. 5) Small distance movement and automatic self-testing function. 6) Easy to learn the patterns-setting methods. 7) Advanced computer control system, easy to operate. 8) Multi-span independent patterns (360 or 180 degrees available). 9) Lowest power consumption among all the domestic brands. 10) Highest needle-operation speed among all the domestic brands. |
|
Single Jersey Circular Knitting Machine
1) Adopt the 4 track cams seal design and equip with the knit cams, tuck cams and miss cams. Central raising and falling system can adjust the fabric weight conveniently and quickly. 2) The special design of feeding yarn carrier makes the addition Lacra more proficiency. Adopt the humanization design, the additional middle feeding yarn transfer ring, easy for personnel observation and carry yarn, avoid to touch operator's body; at the same time, the yarn carrying will more freely and steady, satisfy the demand of machine operating and knitting under high speed. 3) Finished structure makes the cylinder replacing mire convenient. Through the different collocation of the cams, the machine can produce various different plain cloth, such as fiber covered cotton, small tripe cloth, single/double pique mesh, cave and convex cloth, single fleece, twill and single jacquard. 4) A machine with multi-use, only replace the heart parts, the single jersey machine can easy change to 3-thread-fleece and tower machine. |