 |
Our Products/Services: Solar and Recycling Energy, Solar Charge Controller, Solar Collector, Solar Marker
Business type: Trading Company
| Add to favorites Contact Supplier |
|
Solar Marker
Application: For general road on center divider, center line or warning for foggy area etc. Features: 1. High-Tensile strength aluminum alloy Die- casings are resistant to impact and high pressure. 2. Protective coverings of the solar panels are made of impact resistant, transparent PC material. 3. Reflective plates are made of impact resistant PC material. 4. Four, 8mm diameter, wide angle, LEDs are used. 5. Automatically turns on at night and off during the daytime. 6. Even when the solar power unit is not engaged, the PC reflectors still reflect the light that shines on them. |
|
Solar Collector
1) Materials: a) Manifold casing material: SUS304 grade stainless steel ; b) Frame material: SUS304 grade stainless steel ; c) Header pipe material: C12200 copper ; d) Insulation: polyurethane foam. 2) Optimal installation angle: a) Vertical: 30 - 70° ; b) Horizontal: 0° ; 3) Maximum operating pressure: 0.6 - 0.8MPa. 4) Optimal flow rate: 0.1L/min/tube - 0.026GL/ min/tube. 5) Reliable, efficient, evacuated tubes. 6) Copper heat pipes for rapid heat transfer. 7) Easy plug-in installation. 8) Maintenance free. 9) Suitable for mains pressure water (working pressure: 0.6MPa) Product Group: Solar Collector |
|
Solar Charge Controller
1) Working voltage: 12V, 24V ; 2) Rated current: 8A, 16A, 20A, 30A, 40A, 50A, 80A, 100A ; 3) Acts as a solar charger when connect with a solar panel ; 4) According to the voltage of battery, controller will adjust the charging current and decide if to supply power to the loads ; 5) Generally keeps battery on full voltage ; 6) Prevents battery from over-charging ; 7) Prevents battery from over-discharging ; 8) Prevents battery from supplying power to solar panels during darkness Product Group: Solar Collector |