Ester

Ethyl Acetate

Appearance: Transparent liquid without contamination ; Colority 5 ; Density, +20C, KG/m3 0,898-0,900 ; Content of main substance, %, min 99,8 ; Content of acid (acetic), %, max 0,004 ; Content of fixed residue, %, max 0,001 ; Temperature limits for distillation (pressure 760 millimeter of mercury) 75-78 ; Content of water, % 0,1 ; Cmparative volatility 2-3 ; Content of ethyl alcohol, %, max 0,015

Palm Methyl Ester

Palm Methyl Ester is a family of material that is used as a base for producing Bio Diesel. Palm Methyl Esters is produced from palm oil and is made through a chemical process called transesterification. The conversion of these oils to methyl esters involves the use of methanol as a raw material and a basic catalyst. As Palm Oil cannot be used directly as a diesel engine fuel because it has a higher viscosity than fuels obtained from petroleum products, it is converted into smaller molecules of methyl esters before it can be used as a diesel fuel. Palm Methyl Ester has a unique carbon chain distribution that is set by the oil and process used. Palm Methyl Ester is a ready diesel substitute and is the greatest potential as an alternative fuel source and have also been successfully tested and used as fuel for power stations and diesel passenger cars.

2 - Hexanone

Features: 1) S. F.: CH⊂3(CH⊂2)3COCH⊂3 ; 2) M.W.: 100.16 ; 3) Appearance: transparent liquid ; 4) Technical indicators: quality index, physical property index ; 5) Boiling point: 128°C ; 6) Content (wt): >=99% ; 7) Melting Point: -57°C ; 8) Moisture (wt): =<0.3% ; 9) Flash point: 25°C ; 10) Acidity (wt): =<0.05% (by acetic acid) ; 11) Density (20°C/4°C): 0.811 ; 12) Refractive index (n020): 1.401. Cautions: 1) An inflammable liquid, this product may explosively mix with air when in steam form 2) Must be kept away from fire sources, strong oxidants and static electricity ; 3) If it catches fire, use foam, powder or carbon dioxide fire extinguishers to put out the fire ; 4) It is irritating to skin, eyes and the respiratory system.

Dimethyl Carbonate

Features: 1) Formula: C3H6O3 ; 2) Under normal temperature, it is a colorless, transparent liquid. ; 3) It can be mixed with such organic solvent as alcohol, ketone, ester, etc. at any proportion but it is slightly soluble in water ; 4) It must be stored in a cool and well-ventilated place ; 5) It must be dealt with in the same way as inflammable chemical products. Specifications: (Conform to ISO9001) ; 1) Appearance: colorless, transparent, liquid ; 2) DMC content, %: >=99.5 ; 3) Moisture, %: =<0.05 ; 4) Alkalinity, (as OH-) mmol/100g: =<0.08 ; 5) Non-volatile matter, %: =<0.005 ; 6) Density (20oC), g/cm3: 1.070-1.075

Propylene Carbonate

Industrial grade standard: 1) Content: >=99.5% ; 2) Moisture: =<0.3% ; 3) Bromide(as Br-): =<0.1 ; 4) Density 20oC (g/cm3): 1.2000±0.005 ; 5) Chromaticity: =<10 ; 6) Index of refraction: 1.420-1.422 ; 7) Ash: =<0.005% Reagent grade standard: 1) Density 20%(g/cm3): 1.2006±1.2060 ; 2) Index of refraction: 1.420-1.422 ; 3) PH (170kg/L solution 25oC): 5.5-7.5 ; 4) Moisture: =<0.1% ; 5) Slag remains burned% =<0.05

Ester

We can offer you ethyl acetate with the following characteristics: results ; appearance transparent liquit witiiout mechanical impurities ; Ethylacetate content 99,74 ; Hazen colour 0 ; Density at 20 c, g/cm3 0,900 ; Water content, % 0,035 ; Acidity (as asetic acid) 0,002 ; Nonvolatile components, % 0,0008 ; Aldehydes (as acetic aldehyde) 0,008 ; Relative volatility (as ethyl ether) 3,0 ; Destillahion range at 101325 PA (760 mm hg):95,0% of the product by volume to be destilled between 75,0-76,7

Soyabean Lecithin

Manufacturer of Soyabean Lecithin from China. Features: 1) Acetone insoluble: 60% min. 2) Acid value: 30mgKOH/g max. 3) Moisture: 1% max.

Soyabean Fatty Acid Methyl Ester

We can supply phytosterol and natural ve from china. Our by product soyabean fatty acid methyl ester has a capacity of 1200tons annually. It can be used as lubricant, biodiesel, etc.

Methyl Formate And Formic Acid 85%

We offer Methyl Formate in Bulk as well as in drums of 200kgs in container loads. We offer Formic Acid 85% packed in 35 Kg Carboys in 20' and 40' containers.

Butyl Acetate

Appearance: Transparent liquid without contamination ; Colority 10 ; Density, +20C, KG/m3 0.882 ; Content of main substance, %, min 99,9 ; Content of acid (acetic), %, max 0,003 ; Content of fixed residue, %, max 0,001 ; Temperature limits for distillation (pressure 760 millimeter of mercury) 125,8-127 ; Content of water, %, max 0,1 ; Cmparative volatility 2-3

Phytosterol Sterol Ester

We can supply high quality phytosterol and natural vitamin e. Our capacity for phytosterol is 200tons per year. The raw material is gmo soyabean.

Soya Bean Fatty Acid Methyl Ester

Our company in China stock market main list, is the largest phytosterol, natural vitamin e oil. Our by product is fatty acid methyl ester. Currently the capacity for our fatty acid methyl ester is 1200 tons per year. It can be used as biodiesel and lubricant. Our current content is higher than 90%.

Fatty Acid Methyl Ester

As the largest fatty acid methyl ester manufacture in China, we produced fatty acid methyl ester the index as follows: Standard: Fatty acid methyl ester ; Assay % 95 ; Acidity mg koh/g 3 ; Saponification value mg koh/g 150-180 ; Moisture % 0.5 ; Iodine value g/100g 70-130

Ethylene Carbonate & Propylene Carbonate

Sale for Ethylene Carbonate And Propylene Carbonate from china. Ec: 99.9%min, packing: 200kg/drum ; PC: 99.9%min, packing: 200kg/drum.

DMC (2-methacryloyloxyethyltri-methylammonium Chloride)

Introduction: DMC is the abbreviation of methacryloyloxyethyltri-methylammonium chloride. It is produced through the Menschutkin reaction between DMAM and chloromethane. Its quality indexes reach the standard of the same kind of products imported fiom Japan, satisfying the processing requirements of homopolymerisation or copolymerization. DMC is a cationic monomer. It can homopolymerize or copolymerize with other monomers to produce cationic polymers, which have very strong polarity and affinity with anion substances, so can be widely used as cationic flocculants. DMC can be used in sewage water removal process in sewage treatment plant as well as in wastewater treatment in coal floatation, printing and dye industries. In addition, DMC can also be used to produce high hydroscopicity resins and oil fields chemicals, etc. Quality Indexes: Items Fine quality product ; Exterior Transparent colorless liquid ; Purity (m/M, %) 78.0 ; Acidity (In terms of MAA, %) 0.2 ; Water content (m/M, %) 22.0 ; Polymerization inhibitor content (ppm) 1500

Isooctyl Acetate, Isooctyl Ester and 2-Ethyl Hexyl Acetate

1) Colorless liquid with a pleasant fruit fragrance ; 2) Color (APHA): =<15 ; 3) Purity: >=98.0% ; 4) Moisture: =<0.05% ; 5) Acidity: =<0.02% ; 6) Specific gravity (d25): 0.872- 0.874

Biodiesel(Methylester) From Wasted Or Virgin Vegetable Oils

We manufacture two types of biodiesel systems to process any wasted or virgin vegetable oil with the innovative savoia bd jet protocol in china.

Triethyl Phosphate (TEP)

Appearance: Achromatic transparent liquid ; Assay:99.5%min ; Acidity:0.05 ; Refractive index:1.405-1.407 ; Packing:200kgs/iron drum ; CAS No.:78-40-0 ; Application: Used as fire-retardant, strength agent of rubber and plastic and the material of pesticides, aging and steady agent of resin.

N-Butyl Ether

Features: 1) M.F.r: CH&sub3;(CH&sub2;)3O(CH&sub2;)3CH&sub3; 2) M.V.: 130.2 ; 3) Appearance: transparent liquid ; 4) Technical indicators: quality index, physical property index ; 5) Boiling point: 142°C ; 6) Content (wt): >=99.5% ; 7) FNP: -95°C ; 8) Moisture (wt): =<0.05% ; 9) Flash point: 25°C ; 10) N-butyl ether (wt): =<0.05% ; 11) Density (20°C / 4°C): 0.769 ; 12) Refractive index (n020): 1.399. Cautions: 1) An inflammable liquid, this product may explosively mix with air when in steam form ; 2) Must be kept away from fire sources, strong oxidants and static electricity ; 3) If it catches fire, use foam, powder or carbon dioxide fire extinguishers to put out the fire ; 4) It is irritating to skin, eyes and the respiratory system.

Glycerol Triacetate

Slightly soluble in water, Soluble in many kinds of organic solvents. This product is mainly used as filter tip of cigarette- plasticizer of secondary cellulose. Also used as flavor, essence, fixative and lubricate of cosmetics. Also used as plasticizer and solvent of printing ink, coating, cellulose nitrate, cellulose acetate, ethyl cellulose and cellulose acetate butyrate. Colorless transparent oily liquid, with bitter taste, nontoxic,1) Color (APHA): =<302) Purity: >=99.0%3) Moisture: =<0.15%4) Acidity: =<0.02%:5) Specific gravity (d25): 1.156 - 1.164Outer packing:200kgs/drum.

Chloro-methoxy fat diethylene glycol dinitrate

Chloro-methoxy fat diethylene glycol dinitrate Appearance: Yellowish transparent oily liquid; It is macromolecular weight product with well compatibility with PVC. It has well plastic effect, fire resistant, nontoxic and environmentally friendly. It has ester structure, so it can be used for plasticizer. It also has chlorine element, so it has fire resistance and electrical insulating property 200L plastic drum, net wt 180kg/drum, non-hazardous chemicals.

Triethyl Phosphate

Triethyl Phosphate Appearance: colorless transparent liquid Usage: fire retardant of rubber and plastic, plasticizer, material of insecticide, curing agent of resin and stabilizer. Productivity: 500tons/month Package: 200KG/drum, 16T/container

Ethylene Glycol Diacetate Mixture

Ethylene Glycol Diacetate Mixture
Specification: CAS No.: 111-55-7 ; Other Names: High Boiling Solvent ; MF: 146 ; Grade Standard: Industrial Grade ; Purity: 99% ; Appearance: Clear Colorness Liquid ; Application: Solvent,Thinner,Auxiliary, Acceler. ;
EGDA is a new generation high boiling point solvent with environment protect specialty, which is researched by Zhuhai Feiyang Chemical Co., Ltd. in 2008.
Compare to DBE, It’s advantage is comfortable smell, wide boiling range, steady component, quick dry in winter, and low cost.
It is mainly used in Coil coatings, Wood coatings, Can coatings, Automotive coatings, Screen Ink, Enameled wire paint, Paint industry, Printing ink industry, Resin industry, Detergent.

This is new product get the approval and confirmation from the master in paint and coatings.

Welcome to visit our website to get more information.

Ethyl Acetate 141-78-6 Ea

Ethyl Acetate 141-78-6 EA
Specification: CAS No.: 141-78-6 ; Other Names: Ethyl Acetate ; MF: CH3COOC2H5 ; EINECS No.: 205-500-4 ; Grade Standard: Agriculture Grade, Food Grade, . ; Purity: 99.9% ; Application: paintings, adhesives. ;
Ethyl Acetate 141-78-6 EA

CH3COOC2H5
CAS: 141-78-6
PACKAGE: 180KGS/IRON DRUM, 14.4MTS/20FT CONTAINER
HAZARD CLASS: 3 (Packing Group: II) UN: 1173
specifications:

ITEM	SPECIFICATION (%)	RESULTS (%)
Ethyl acetate	99.5min	99.89
Density at 20 DegC(Kg/Ltr)	0.899-0.901	0.9000
Acidity as acetic acid	0.04max	0.003
Non-volatile matter	0.0005max	0.0003
Water content	0.1max	0.03
Color(Pt-Co) ppm	10max	10
Evapotation deposits	0.001max	pass
Ethanol	0.1max	0.03
CONCLUSION		Qualified

APPLICATIONS: widely used as solvents for paints, coatings, adhesives, cellulose, plastics, fats, wood stains. it is also used as an adhesive in the production of printing ink and Venetian pearl; as a distillation agent in the production of medical-use medicines and organic acid etc;as fruit essences such as pineapple and banana etc;as perfume such as usquebaugh and better etc

N-propyl Acetate

N-Propyl Acetate
Specification: CAS No.: 109-60-4 ; Other Names: N-Propyl Acetate(NPAC) ; MF: C5H10O2 ; Grade Standard: Electron Grade, Food Grade, Ind. ; Purity: 99.5% ; Appearance: Clear liquid ; Application: Elasticity base stock,Intaglio-use. ; Clear liquid: acetate ;
N-Propyl Acetate(NPAC)
Specifications
Molecular weight: 102.13

Molecule Formula:	C5H10O2
Molecule Weight:	102.13
CAS NO.:	109-60-4
Constitutional Formula:	CH3COOCH2CH2CH3
Synonyms:	N-PROPYL ACETATE,NPAC
Applications:	Elasticity base stock,Intaglio-used printing oil,Polyolefine and amide film printing,Nitrate,Chiorinated rubber,spice
Specification:	Item	Unin	Standard
	Appearance	Clear liquid
	Odour	Smells pear-like fragrance
	Purity	%	≥99.5
	Colour	Hazen	≤10
	Moisture	%	≤0.05
	Acidity (as HAC)	%	≤0.01
	Specific Gravity(20°C)	g/ml	0.884-0.890

Packaging Packaging Detail: 180KGS PER IRON DRUM/19500KGS PER ISOTANK

sent by Summer

Ethyl Acetate99

Ethyl acetate99
Specification: CAS No.: 141-78-6 ; Other Names: Ethyl acetate ; MF: C4H8O2 ; EINECS No.: 205-500-4 ; Grade Standard: Industrial Grade ; Purity: 99.5% ; Appearance: Clear transparent liquid ; Application: solvent,painting,ink,coating etc ; Clear transparent liquid: 99.5 ;
Actual Purity over 99.9%,meet customers demandand abroad.
Can supply cargos packing in bulk,ISO tank,drum,IBC drum

1.Commodity name: Ethyl Acetae.
(This products is only for industrial use,not used as people food and animal feed additine and its' materials).
2.Specifications:
Color(Pt-Co): 10 Max
Density.20'C c(g/cm3): 0.897-0.902
Purity:99.85% Min
Water:0.005 Max
Ethanol:0.04% Max
Acidity (as Acetic acid):0.004% Max
According to japan's customer requirements,we can supply following specification:
Appearance: clear,transparent liquid.
Color(Hazen):5 Max
Purity,wt:99.80% Min
Density.20'C c(g/cm3):0.897-0.902
Water content,wt:0.015% Max
Nonvolatile matter.wt:0.001% Max
Acidity(as acetic acid).wt:0.002% Max(Analysis method as per JIS K1516-1994)
Ethanol aontent,ppm:200 Max
ACETALDEHYDE.PPM: 30 Max.

Ethyl Acetate

Ethyl acetate
Specification: CAS No.: 141-78-6 ; Other Names: acetic ester ; MF: C4H8O2 ; Purity: 95%min ; Appearance: Transparent liquid ; Color: Transparent ;

	Index	Test result
Ethyl acetate ≥	99.0	99.5
Acidity by acetic acid ≤	0.004	0.004
Water ≤	0.10	0.06
Density g/ cm3	0.897-0.902	0.900
Evaporation deposits ≤	0.001	Passed Qualified
Color APHA ≤	10	10
Appearance	Transparent liquid, No mechanical impurities	Transparent liquid, No mechanical impurities

S Plasticizer Dbp

s plasticizer DBP 99.5%
Specification: CAS No.: 84-74-2 ; Other Names: DBP ; MF: C16H22O4 ; EINECS No.: 201-557-4 ; Grade Standard: Industrial Grade ; Purity: 99.5% ; Appearance: Colorless transparent liquid ; Application: plastic ; MF: C16H22O4 ; apperance: Colorless transparent liquid ;

DBP Dibutyl Phthalate. 99.5%
Strong solvent plasticizer, can be used in PVS, nitro cellulose, rubber, PEC, ethyl cellulose.

Item	Index
Appearance	Transparent oily liquid
Color(APHA)≤	20
Ester %≥	99.5
Acidity (as benzene dicarbonic acid)%≤	0.01
Loss on dry (125oC3hr)%≤	0.3
Flash point(open)oC ≥	160
Density g/cm3	1.044-1.048

jin cai brand

Sorbitan Trioleate

sorbitan trioleate
Specification: CAS No.: 26266-58-0 ; Other Names: span 85, STO ; MF: C60H108O8 ; EINECS No.: 247-569-3 ; Grade Standard: Agriculture Grade, Food Grade, . ; Purity: ≥98 ; Appearance: clear oily liquid ; Application: emulsifier ;
Sorbitan trioleate (span 85)--Technical specification

Parameters	Standard Value
Acid value(mg KOH/g)≤	15.0
Saponification value (mg KOH/g)	165~180
Hydroxyl value (mg KOH/g)	60~80
Moisture(%)<	2.0
Arsenic (%)<	0.0003
Heavy Metal (%)<	0.001

Triisobutyl Phosphate

Triisobutyl phosphate
Specification: CAS No.: 126-71-6 ; MF: C12H27O4P ; EINECS No.: 204-798-3 ; Grade Standard: Industrial Grade ; Purity: 99% ; color: colorless transparent ;

ITEM	SPECIFICATION	RESULT
APPEARANCE	COLORLESS AND TRANSPARENT LIQUID	COLORLESS AND TRANSPARENT LIQUID
GRAVITY (d20/4)	0.960-0.970	0.9646
MOISTURE (WT%)	0.1 MAX	0.056
ACID (mgKOH/g)	0.1 MAX	0.018
CONTENT (GC WT%)	99.0 MIN	99.18
COLOR (APHA)	10 MAX	<10
REFRACTIVE (n20/D)	1.4190-1.4200	1.4190

Cyclohexyl Methacrylate Chma

Cyclohexyl methacrylate CHMA
Specification: CAS No.: 101-43-9 ; MF: C10H16O2 ; Purity: min .99.5%(GC) ;
DESCRIPTION
Cyclohexyl methacrylate CHMA
CAS:101-43-9
CHEMICAL STRUCTURE

INTRODUCTION
The product is mainly used in coating, plastic, textile, leather, and paper making industries as monomer or comonomer for solution polymerization or suspends polymerization.
SALES SPECIFICATION
Degree of purity: min .99.5%(GC)
Acid content: max.0.01%(acid -base titr., calculated as MAAC)
Watercontent:max.0.05%
Color:max.10(Pt-Co)
Stabilization:20±5ppm MEHQ(HPLC)
PHYSICAL DATA
Appearance: clear,colorless liquid
Molecular weight: 168.2g/mol
Density: 0.968 g/m3(20)
Refractive index: 1.459(20)
Boiling point: +210(1013mbar)
Viscosity: 1.9mPa.s(20)
Flash point: +82.5
GENERAL HINTS
Combustible! Polymerization may be initiated by contamination with peroxides,azo compounds, heavy metal ions, tert. Amines, S compounds. Polymerization is also induced by light. Atomospheric oxygen saturation in the monomer is necessary for stability. Storage temperatures should not exceed 35.
PACKAGE
Plastic drums, 190kg net weight, or stainless steel tank.
TRANSPORTATION AND STORAGE
Avoid shine rain and high temperature in transportation;
Store the products in cool, shady and ventilated conditions, keep far away from fire;
6 months from date of delivery at a maximum storage temperature of 30.

Dibutyl Phosphite

Dibutyl phosphite
Specification: CAS No.: 1809-19-4 ; Other Names: Dibutyl phosphite ; MF: (C4H9O)2POH ; EINECS No.: 217-316-1 ; Grade Standard: Industrial Grade ; Purity: 14.5-16 ; Appearance: oil liquid in blank or light yellow ; Application: solvent and antioxygen ; color: transfer ; formular: (C4H9O)2POH ;
1.
Product Index

Item	Quality Index	Testing Method
Appearance	Oily liquid in blank or light yellow	Eye measurement
Phosphor content: P%	14.5-16.0	SH/T0296
Acid number: mgKOH/g≤	15	GB/T264
Sheet copper erosion grade(121°C, 3h)	0-1	GB/T5096

2.ApplicationThis product is the best selection of Ep antiwear additive for lubricant, with high index of antiwear additives and good compatibility that can match with industrial gear oil,cutting oil and other oil in low, middle grade or high grade. With recommendable accession amount of 0.3%-1%, this product, mixed with other additives, can be modulated into compound additives. Besides, being one of the major organic industrial chemicals, it can be applied as fire retardant and gasoline dope.

Tbp-tributyl Phosphate

TBP-Tributyl Phosphate
Specification: CAS No.: 126-73-8 ; Other Names: TBP ; MF: (C4H90)3PO ; Grade Standard: Industrial Grade ; Purity: 99.0 ; Appearance: colourless or yellowish transparent. ; Application: used as extracting agent for rare . ; colorless: yellowish ;
1. Properties:
colourless or yellowish transparent liquid, soluble to many kind of organic solvents

2. Quality Index:

Item	Standard
Content %	≥99.0
Density (20°C) g/ml	0.974-0.980
Refractive Index (ND20)	1.423-1.425
Acid Value(as H+) mmol/100g	≤O.2
Water(H2O) %	≤O.12

3. Uses:
It is used as extracting agent for rare metals, defoaming agents for paints and chemical production processes, solvents for oily inks and paints, also as concrete additives and chemical agent.

4. Specification:
200Kg/galvanized barrel.

emical agents.
5. Storage and Transportation:
Handle with care, no vigorous strike is permitted. Deposit in shady, airy and dry warehouse, keep away from fire and rain

Glycerine In Paper Industry

glycerine in paper industry
Specification: CAS No.: 56-81-5 ; Grade Standard: Industrial Grade ; Purity: 98.7% ;
Glycerine can be obtained from various oils and fats, however, the best is derived from palm-based oleochemicals due to its natural purity. Hence, it is preferred in pharmaceutical, food and personal care applications.
It is known to person that glycerin is widely used in toiletries, such as lotion ,cream,toothpaste,lipstick,liquid soap as well as in food as edulcorator. The tobacco industry uses the glycerin as humectant when the medical industry can use it in ointment, tincture, complexant,cough syrup etc. The paint and printing needs it in resin, the plastic industry uses it as plasticizer and release agent. The motoring industry relies on it for antifreeze agents. In the paper industry, the glycerin used as cellophane and coated Paper. The glycerin also can be used in the textile industry.

Item	Spec.
Appearance	transparent, no suspension
Odor	no bad smell
Chroma(Hazen),≤	20
Assay ≥	98.5
Density (20°C),g/ml ≥	1.2572
Sulfating Ash,% ≤	0.01
Acidity or Alkalinity (mmol/100g)≤	0.064
Saponification equivalent (mmol/100g)≤	0.64

Dbe

DBE
Specification: CAS No.: 1119-40-0,627-93-0,106-65-0 ; Other Names: AGSE ; MF: CH3OOC{CH2}nCOOCH3,n=2,3,and 4 ; Grade Standard: Industrial Grade ; Purity: ester content 99% ; Appearance: colorless transparent liquid ; Application: printing ink and coating ; Appearance: colorless transparent liquid ; Ester content: 99% min ;

Export High Quality Ethyl Acetate Cas:141-78-6

export high quality Ethyl acetate CAS:141-78-6
Specification: CAS No.: 141-78-6 ; Other Names: Ethyl acetate ; MF: CH3COOC2H5 ; Grade Standard: Agriculture Grade, Electron Gra. ; Purity: 99.9% ; Appearance: colorless liquid ; Application: food,textile,paint,pharma,leather . ;
Ethyl acetate

name	ethyl acetate
cas	141-78-6
Purity	99.9%
MF	CH3COOC2H5
appreance	colorless liquid.
Uses	used in food,textile,paint,pharma,leather ,,,,

Rosin Ester

Rosin Ester
Specification: CAS No.: 8050-31-5 ; Grade Standard: Food Grade ; Purity: 100% ; Appearance: solid ; Application: chewing gum ;
Rosin Ester food grade
Product Specification:

Items	Glycerol Ester of Gum Rosin	Glycerol Ester of Hydrogenated Rosin
Items	BT-85e	BTHR-85e
Solubility(with toluene1:1)	Clear	Clear
Color (Fe-Co Scale) , max	8	8
Acid Value,mgKOH/g , max	5~8	5~8
Softening Point(R&B), , min	80~88	78~88
Specific gravity,25 /25	1.080~1.090	1.060~1.070
Ash content,% , max	0.1	0.1
Aresenic content,% , max	0.0002	0.0002
Heavy metal(as Pb),% , max	0.002	0.002

2.Properties and uses:
BT-85e is esterified from refined gum rosin and edible glycerol (or pharmacy grade),BTHR-85e is esterified from refined hydrogenated rosin and edible glycerol,used as emulsification stabilizer for drinks, and as chewing ingredient for chewing gum & bubble gum.BTHR-85E can be also used as tacklifier for adhesives for cigarette filter adhesives

Packing:
25kg /bag

Dioctyl Adipate

Dioctyl Adipate
Specification: CAS No.: 103-23-1 ; Other Names: DOA ; MF: C22H42O4 ; EINECS No.: 203-090-1 ; Grade Standard: Agriculture Grade, Food Grade, . ; Purity: 99% ; Appearance: Colorless transparent oily liquid, ; Application: plastisol ; product: Colorless transparent oily liquid, ;
DOA

It used in the plastisol, the products with low initial viscosity, viscosity stability is good. Products can be given to low-temperature flexibility and good light resistance.
This product processing showed good lubricity, feel good products, good products can be processed to give lubricity, low temperature flexibility, light resistance and surface finish. .
More with the DOP, DBP and other primary plasticizer used in agricultural films, cold, frozen food packaging film, cable wire coating, leather, sheet metal, pipes and other outdoor use.
For the plasticized paste, the paste of the initial low viscosity, viscosity stability.

Item	Best quality	Grade A
Colourity (Pt-Co)max	50	100
Ester % min	99.0	99.0
Density (ρ20οC)g/cm3	0.927±0.003
Acidity (base on adipinic acid) %max	0.020	0.030
Flash point οC min	190	186
Loss on heating % max	0.25	0.30

Propylene Glycol Monolaurate

Propylene glycol monolaurate
Specification: CAS No.: 142-55-2 ; Other Names: Propylene glycol monolaurate ; MF: C15H30O3 ; Grade Standard: Agriculture Grade, Electron Gra. ; Purity: 100% ; Appearance: Yellow paste ; Application: emulsifier ; Appearance: Yellow paste ;
Propylene glycol monolaurate
1. General
This product is produced and marketed by Jiangsu haian Petro chemical plant. The units producing and marketing this product are certified according to Q/320621HA064.
Appearance: Yellow paste
Chemical Name: Propylene glycol monolaurate
Synonyms: 2-hydroxypropyl laurate; 2-hydroxypropyl dodecanoate.
Molecular Formula: C15H30O3
CAS No.: 27194-74-7; 142-55-2
2. Specification

Parameter	Unit	Specification	Test Method
Acid value	mgKOH/g	≤5	GB/T 6365
Saponification number	mgKOH/g	212~222	HG/T 3505
Water content	% m/m	≤1.0	GB/T 7380

3. Applications
Used as emulgator and opacifier of shampoo, colorant grinding additive.

Calcium Stearate
Specification: CAS No.: 1592-23-0 ; Other Names: Calcium stearate ; MF: Ca(C17H35COO)2 ; EINECS No.: 216-472-8 ; Grade Standard: Industrial Grade ; Purity: Ca content 6.5+/-0.5 ; Appearance: Fine light white powder ; Application: lubricant, emulsifier, stabilizer,. ; white, fine powder: insoluble in water ;
Calcium Stearate

Molecular formula: Ca (C17H35COO)2
Molecular weight: 606
CAS No.: 1592-23-0
EC No.: 216-472-8

.Specifications:

Melting Point,	140min
Calcium Content,%	6.0-7.1
Moisture,%	3.0
Free Fatty Acid,%	0.5 max
Fineness(thr. mesh 200),%	99.0min

Storage and Transport
It should be stored in a cool, dry place, gently loading and discharging to prevent any damage to the packages, transport according to the ordinary chemical regulations

Ethyl Acetate

Ethyl Acetate
Specification: CAS No.: 141-78-6 ; Other Names: Acetic ester ; MF: C4H8O2 ; Grade Standard: Industrial Grade ; Purity: 99.85% ; Appearance: Clear, transparent liquid ; Application: extracting agent,Organic synthesis. ; Color(Pt-Co): 10 max ;
Specification:
Appearance: Clear, transparent liquid
Color(Pt-Co), Code: 10 max
Purity: 99.85% min
Density, (20ºC ,g/cm3): 0.897-0.902
Water content: 0.05% max
Ethanol: 0.04% max
Acidity(as acetic acid): 0.004% max

Ethyl 2-methylbutyrate

Ethyl 2-methylbutyrate
Specification: CAS No.: 7452-79-1 ; Other Names: 2-methyl-ethyl ester ; MF: C7H14O2 ; EINECS No.: 231-225-4 ; Grade Standard: Industrial Grade ; Purity: 99%MIN ;

Appearance	Colorless transparent liquid.
Odor	has apple fragrance
Relative Density(25/ 25°C)	0.8620 ~ 0.8670
Refractive Index(20°C)	1.3960 ~ 1.3980
B.P.	133°C
Acid value (mg.KOH/g)	≤1.0
Assay(%)	≥99.0
Natural degree	C14 test 100%±3%
Packing & Storage	200L galvanized iron drum, 25L plastic drum, 50L aluminum drum. Stored in cool and dry place, should not be put in open air.

Monomer Methyl Methacrylate99% Good Factory

monomer methyl methacrylate99% good factory
Specification: CAS No.: 80-62-6 ; Other Names: Methyl Methacrylate, MMA ; MF: C5H8O2 ; EINECS No.: 32-14-9 ; Grade Standard: Industrial Grade ; Purity: 99%,99.9% ; Appearance: Colorless Transparent liquid ; Application: organic glass monomer, methyl meth. ;
1.MMA Purity:99.9%
2.Clear transparent liquid
3.Timely delivery
4.Package:190G/drum
5.Good quality and low price
1.Purity:99.9%
2.Clear transparent liquid
3.Timely delivery
4.Package:200KG/drum
5.Good quality and low price

Specification

purity	99.9%min
Water	0.004%max
Acidity	0.005%max
Colour	5max
Light fractions	0.05max
Heavy fractions	0.08max
Inhibitor(TA)	0.04max

Package:190kg/ Drum Useage: Mainly used as organic glass monomer, methyl methacrylate and for making plastic cast acrylic sheet. properties :Colorless liquid, volatile. Melting point - 48 degaree, boiling point 100-101 0.9440 relative density 1.4142 refractive index 10 degrees, flash point of soluble in ethanol, ethyl ether, acetone etc. Various organic solvents. Slightly soluble in water and glycol. Storeage: Zinc steel barrel packaging, ate 190kg. Stored in a cool ventilated place, methyl methacrylate transported as common danger

Propyl Acetate 109-60-4

Propyl acetate 109-60-4
Specification: CAS No.: 109-60-4 ; Purity: 99.5min ;
Propyl acetate
CAS No.:109-60-4
Other name: Propyl ethanoate
n-Propyl ethanoate
n-Propyl acetate
Propylacetate
Acetic acid, propyl ester
n-Propyl ester of acetic acid

Properties

Molecular formula	C5H10O2
Molar mass	102.131 g/mol
Appearance	Clear, colourless liquid
Density	0.888 g/cm3, liquid
Melting point	95 °C (178 K)
Boiling point	102 °C (374.8 K)

Specification

Item	Index	Results
N-propyl acetate, %	99.5Min	99.8
Acidity (by acetic acid) , %	0.01Max	0.002
Moisture , %	0.05Max	0.04
Color , APHA	10 Max	5
Evaporites , %	0.001Max	0.001

Application:
Used in printing ink for the stretch and concave printing plate, especially for the print of polyolefine and amide pellicle, as a impregnant for the nitric acid cellulose, chlorination rubber and hot corresponsive phenolphthalein plastic, even it can be used as spice.

Package:
180kg/drum

Butyl Acetate 99.2% Min.

Butyl acetate 99.2% min.
Specification: CAS No.: 105-46-4 ; Other Names: n-BUTYL ACETATE ; MF: 123-86-4 ; Grade Standard: Industrial Grade ; Purity: 99.2% ; Appearance: Colorless, Clear liquid ; Butyl acetate: 99.2% ;
1. High purity: 99.3%min
2. Steady supply: 5,000tons per month
3. Quick delivery: within 10 days

Basic information:

Butyl, or sec-butyl acetate, also known as butyl acetate. It can dissolve a variety of resin and organics.The properties of Sec-butyl acetate and other isomers are similar in most cases, the biggest differences are that its boiling point is lower than n-butyl and isobutyl, and its evaporation is faster.

Appearance: colorless, flammable, with fruit flavor liquid

CAS No.: 105-46-4

EIENCS No.: 203-300-1

Molecular formula: CH3COOCH (CH3) CH2CH3

Molecular weight: 116.16

HS code: 29349990

Application:
used as solvent in coating industry.
used as solvent in printing ink,adhesive agent.
used as the reaction intermediate in the production of resin.
used as a cleaning agent.
used as a component in diluents.

Acrylonitrile Butadiene Styrene Resins

Acrylonitrile Butadiene Styrene Resins
Specification: CAS No.: 9003-56-9 ; Other Names: Acrylonitrile Butadiene Styrene Re. ; MF: (C8H8)x(C4H6)y(C3H3N)z ; EINECS No.: --- ; Grade Standard: Agriculture Grade, Industrial G. ; Purity: --- ; Appearance: pale yellow solid ; Application: making helmets, luggage , applianc. ; Color: pale yellow solid ;
Product name: Acrylonitrile-butadiene-styrene terpolymer; Acrylonitrile Butadiene Styrene Resins
CAS NO.:9003-56-9
Formula: (C8H8)x(C4H6)y(C3H3N)z
Appearance: ABS resin is a pale yellow solid, have a certain toughness, density of about 1.04~1.06 g/cm3. It is acid, alkali, salt corrosion stronger, but also to some extent, organic solvent tolerance.
Packing: in 25kg net bag
Usage: Materials for automotive industry, building materials, wood substitutes, and used for making helmets, luggage , appliances, shell, foam and other fire-retardant ABS, plastic sheet material, acrylonitrile-butadiene - styrene board.

Specification:

Characteristic	Experimental method	Unit	D-180
Tensile Strength	ASTM D-638	kg/cm2	432
extensibility	ASTM D-638	%	29
bending strength	ASTM D-790	kg/cm2	755
distortion temperature	ASTM D-648	°C	87
impact strength	ASTM D-256	ft-lbs/in2	24.1

Food Grade Glyceryl Monostearate 95% Min - Flakes

Food Grade Glyceryl Monostearate 95% min - flakes
Specification: CAS No.: 123-94-4 ; Other Names: GMS ; MF: C21H42O4 ; EINECS No.: 204-664-4 ; Grade Standard: Food Grade ; Purity: 95.0%min ; Appearance: white /flaky, lumpy, powdery solid. ; Application: emulsifier and surface active agen. ; off-white: flakes ;
Glyceryl Monostearate
Commodity: Food Grade Glyceryl Monostearate 95% min - Flakes
Property: off-white powder or cream-like waxy flakes with the odour of fatty, free flowing, poisonless. Disperse in hot water, soluble in hot alcohol.

Packing and storage: 25kg net each PP woven bags with PE liner. It should be kept in dry, cool and ventilated place.
Application: It widely used as good emulsification, dispersibility and stabilization properties, Antiaging of starch, It also widely use in beverage and instant food, ice cream , products of grease, and
pharmaceutical grade, and cosmetic industries have a wide range of applications.
Specification data: See the table below.

ITEMS	STANDARD
Content of ester	95%min
Iodine value:	3g/100g max
Melting point:	60-70°C
Acid value	2.5g/100g max
Heavy metal(as Pb):	0.0005% max
Iron:	0.001% max
Arsenics:	0.0015%max

Methyl Chloroacetate

methyl chloroacetate
Specification: CAS No.: 96-34-4 ; Other Names: methyl chloroacetate ; MF: C3H5ClO2 ; Grade Standard: Agriculture Grade, Industrial G. ; Purity: 99.5% ; Appearance: Colorless transparent liquid ; Application: synthetic pesticides dimethoate ;
Specifications:

Items	Index
Appearance	Colorless transparent liquid
Content%	99.5
Dichloroacetic acid methyl ester%	0.5
Moisture%	0.1
Acidity% ≤	0.07
PH	5 - 6

Physical Properties: colorless transparent liquid with irritant odor.

Usage: Mainly used to synthetic pesticides dimethoate, omethoate intermediate parathion ester, oxygen parathion ester and chloroacetyl methylamine in the pesticide; in addition, methyl chloroacetate as an organic synthetic material used in medicine , adhesive, surfactant preparation and also used as a solvent.

Package: 200L PE drum; Net weight: 250Kg / drum or steel drum

Ww Grade Gum Rosin

WW Grade Gum Rosin
Specification: CAS No.: 8050-09-7 ; Other Names: Colophony ; EINECS No.: 232-475-7 ; Purity: 76 ; Appearance: transparent solid ; Application: raw material for making soap,paper. ; COLOR: pale yellow ;
Gum Rosin ww grade, resin
Used in paper, ink, rubber, paints and varnish, various adhesives, glue, soap, synthetic resins.
Features:
1) China original gum rosin WW grade
2) Natural organic compound, mainly composed of resins
3) Possesses chemical activity when dissolved in many organic solvents
4) Used for the manufacturing of paper, paint, soap and printing ink
5) Easily softened and oxidized
6) In the oil paint industry, the carboxylation reaction of resin acid is usually employed to produce resinate for further use
7) In the producing of synthetic rubber and printing ink, resin acid is changed into disproportionate rosin, polymerized rosin, hydrogenated rosin, for further use by its double bond reaction
Packing:In galvanized iron drumAbout 225kg/drum
Conveyance:Qty/20' FCL: 21.6MT
It is used in paper, ink, rubber, paints and varnish, various adhesives, glue, soap, synthetic resins, chewing gum and other chemical industries

Ethyl Acetate

Ethyl Acetate
Specification: CAS No.: 141-78-6 ; Other Names: ethyl acetate ; MF: C4H8O2 ; Grade Standard: Industrial Grade ; Purity: 99.7% ; Appearance: colorless ; Application: solvent ; ester: colorless ;
We are the manufacturer of Ethyl Acetate,Vinyl Acetate,Acetic Acid,Butyl Acetate. We can supply the packaging as drums,IBCs,ISOtank & Bulk vessel.

Light-colored Pentaerythritol Ester Of Modified Gum Rosin

Light-colored Pentaerythritol Ester of Modified Gum Rosin
Specification: CAS No.: 8050-26-8 ; Purity: 100% ;
Specifications

Items	PER-100L	PER-100S	PER-100LE	PER-95LE
Solubility(with toluene1:1)	clear
Color(Fe-Co Scale)	1~2	1.5~2.5	1	1
Acid Value,mgKOH/g	20	20~30	20~30	20~30
Softening Point(R&B),	100	100~105	100~105	93~97

Light-colored Pentaerythritol Ester of Modified Gum Rosin has good compatibility with EVA, SIS, SBS, and according to the requests of different applications, they can be used in diapers adhesive products, EVA based hot melt adhesives, etc.

Acetyl Tributyl Citrate

acetyl tributyl citrate
Specification: CAS No.: 77-90-7 ; Other Names: acetyl tributyl citrate;tributyl e. ; MF: C20H34O8 ; EINECS No.: 201-067-0 ; Grade Standard: Agriculture Grade, Food Grade, . ; Purity: 99% ; Appearance: colorless transparent liquid ; Application: plasticizer for PVC ; color: colorless ; appearance: transparent liquid ; use: plasticizer ; purity: 99% ;

Properties:
colorless transparent liquid, insoluble in water, but soluble in most of organic solvents.

Application:
Widely used in plastic, rubber, paint and emulsifier industry etc. Can be used to make artificial leather, agricultural plastic films, packaging materials, cables, etc.

Mainly used for PVC treatment, let products good softness, used to nitric acid fiber coating, have good solubility and dispersion, its adequate adhesiveness and waterproof.

Also can be Used in the production of medical and health products, such as disposable medical instruments and medical packaging materials, etc.

Packing:200kg/drum.

many other kinds of industrial chemicals like this are offered, would you contract me if you intere.sted in these product.any of your feedback will be highly appreciated

Nice N-butyl Acrylate

Nice N-butyl Acrylate
Specification: CAS No.: 141-32-2 ; MF: C7H12O2 ; Grade Standard: Industrial Grade ; Purity: 99% ; Appearance: Transparent crystal ; Application: Used as intermediates in organic s. ; color: colorless ;
Hazard Class: Class 3.3 flammable liquid chemical class of high flash point: the melting point of propylene acyl compounds: -64.6 °C Boiling point: 147.4 °C Relative density (water) = 1) 0.899 relative density (Air = 1) 4.4 saturated vapor pressure 4mmHg 20 °C heat of combustion 5783KJ/mol critical pressure critical temperature 324.7 °C 2.87Mpa Solubility: insoluble in water, soluble in ethanol, ether Stability: Stable Hazardous Polymerization: with increasing temperature, storage time, increased tendency to avoid self-poly exposure conditions: light, heat taboo material: acid, alkali and strong oxidant combustion (decomposition) products: carbon monoxide, carbon dioxideUsed as intermediates in organic synthesis, adhesives, emulsifiers, coatings. Acid and its esters are widely used in industry. In use, tend to aggregate into polymers or acrylic copolymers.

Methyl Dihydro Jasmonate

Methyl dihydro jasmonate
Specification: Aroma: potpourri ; CAS NO: 24851-98-7 ; Molecular Formula: C13H22O3 ; Molecular Weight: 226.32 ;
QUALITY STANDARD:
1. APPEARANCE: COLORLESS LIQUID,HAVING THE POTPOURRI
2. REFRACTIVE INDEX(N20/D): 1.457-1.458
3. RELATIVE DENSITY(D/20/20): 0.999-1.007
4. PURITY: 99.0%MIN (GC)
5. ACID VALUE: 5mgKOH/g MAX
6. USAGE: USED FOR HIGH-QUALITY ESSENCES

Methyl Salicylate

Methyl Salicylate
Specification: CAS No.: 119-36-8 ; Other Names: Wintergreen oil, 2-Hydroxybenzoic . ; MF: C8H8O3 ; EINECS No.: 204-317-7 ; Grade Standard: Medicine Grade, Other ; Purity: 99.0-100.5% min. ; Appearance: Colorless or pale yellow liquid ;
Methyl Salicylate
Cas No.: 119-36-8

Test Item	Standard Specification
Appearance	Colorless or pale yellow liquid
Content	99.0-100.5% min.
Acidity	ml[0.1mol/LNaOH]/5.0 g 0.4 max
Relative Density	1.180-1.186
Refractive index	1.535-1.538
Solubility	1ml product can entirely dissolve in 7ml alcohol (70%)

Uses:

It can offer effects of antiinflammation and pain-ease. It can be used in joint/muscle pain-ease plaster, tincture and oil agent. It can be used as solvent and intermediate pf insecticide, bactericide, polish agent, anti-copper agent, flavor, food, cosmetics, toothpaste, coating, ink, and fiber mordant.

Methyl Laurate Cas:111-82-0

methyl laurate CAS:111-82-0
Specification: CAS No.: 111-82-0 ; Other Names: Methyl dodecanoate ; MF: C13H26O2 ; EINECS No.: 45634 ; Grade Standard: Food Grade, Reagent Grade ; Purity: 99.5% ; Appearance: colorless clear oily liquid ; Application: food flavor or organic intermediat. ; odor: typical odor ; property: insoluble in water ; color: colorless oily liquid ; appearance: oily liquid ; MF: C13H26O2 ; MW: 214.34 ; Boiling point: 262℃ ; Iodine value: 1.0max ; Sapon value: 255-265 ; Acid value: 1.0max ;
methyl laurate CAS:111-82-0
Molecular formula: C13H26O2
Molecular weight: 214.34
Property:
Colorless clear oily liquid,can be dissolved with organic solvents,insoluble in water.
Specification:

Product name	methyl laurate
Appearance	colorless clear oily liquid
Color(APHA)	20max
Saponification number (mgKOH/g)	255-265
Acid value (mgKOH/g)	1.0max
Iodine value (gI2/100g)	1.0max
melting point(°C)	5.2
boiling point(°C)	262
Density	0.8702
Refractive index(25 Degree Celsius)	1.4319

Usage:
It is one of the important food flavor and organic intermediate
Storage:
Stored in cool and dry place. Kept in airproof condition.
Packaging:
Packed in polyethylene plastic pail(with inner cover)

Dimethyl Methyl Phosphonate

Dimethyl methyl phosphonate
Specification: CAS No.: 756-79-6 ; Other Names: Dimethyl methyl phosphonate ; Purity: 100% ;
DMMP Flame Retardant
Dimethyl methyl phosphonate
CAS: 756-79-6
Phosphorus content :25.0%
Density (25 c g/cm3) :1.16 + 0.005
Water content :0.05%max.
Acid value (mgKOH / g):1.0max.
Viscosity (25 c mpa.s) :17.5

Application:
DMMP flame retardant is widely used in polyurethane Foam plastic, unsaturated polyurethane resins, epoxy resin and other polymer material because of having high phosphorus content, little additive, excellent flame retardant. The made products has self-off , low temperature , plasticity, stable UV, antistatic properties.
DMMP as a flame retardant, when you can use it , you should add it, when using in polyurethane foam or mixing with polyether, you can’t store it for a long time
Packaging and Storage:
In 220 kg, or 30 kg for each plastic barrel,, store in a closed , cool, ventilated place

Ethyl Acetate

ethyl acetate
Specification: CAS No.: 141-78-6 ; Other Names: acetic eater ; MF: C4H8O2 ; EINECS No.: 205-500-4 ; Grade Standard: Industrial Grade ; Purity: 99.0min ; Appearance: Colorless transparent liquid ; Application: Ester & Derivatives ; Name: ethyl acetate ; CAS No.: 141-78-6 ; EINECS No.: 205-500-4 ; Appearance: Colorless transparent liquid ;
Ethyl Acetate
CAS No.: 141-78-6 Other Names: acetic eater MF: C4H8O2
EINECS No.: 205-500-4 Place of Origin: jiangsu China (Mainland)
Grade Standard: Industrial Grade Purity: 99.0min
Appearance: Colorless transparent liquid Application: Ester & Derivatives
Brand Name: jingang Model Number: industrial grade Colorless transparent liquid: C4H8O2
Specification

Item	Internal control index
Color(APHA)	10max
Density	0.895-0.902
Ethyl acetate,w/%	99.5min
Water content, %	0.1max
Ethanol,%	0.4max
Acidity(by CH3COOH),%	0.005max
Methyl acetate,w/%	0.05max
Ethyl proplonate w/%	0.3max
Evaporation residue,w/%	0.005max

PACKAGE: 180KGS/IRON DRUM, 14.4MTS/20FT CONTAINER
Use: used as solvents for paints, coatings, adhesive, cellulose, plastics,fats, wood stains

Ethyl Acetate

Ethyl Acetate
Specification: CAS No.: 141-78-6 ; Other Names: acetic ester ; MF: C4H8O2 ; Grade Standard: Agriculture Grade, Electron Gra. ; Purity: 99.5% ; Appearance: Clear liquid, without impurities ; Application: Widely to be applied to make menst. ; Ethyl Acetate: Ethyl Acetate ;
Ethyl Acetate
Ethyl Acetate is a versatile fine chemical products, with excellent solubility, quick dry and wide range usage, EA is a very important organic chemical raw materials and excellent industrial solvent. Ethyl Acetate is widely used in cellulose acetate, ethyl cellulose, chlorinated rubber, vinyl acetate, fiber resin, synthetic rubber, paints and paint such as the production process.

Packing: 180kg iron drums.
Appearance: Clear liquid, without impurities.
Usage:Widely to be applied to make menstruum, dye and pharmaceutical intermediates
Qty: 14.4MT/FCL.

Item	Standard	Analysis
Ethyl acetate content %	≥99.5	GB/T12717
Acid Value %	≤ 0.004	GB/T12717
Moisture %	≤ 0.10	GB 6283
Density (20 ºC ) g/cm3	0.897-0.902	GB 4472
Residue on evaporation	≤ 0.001	GB 6324.2
Color(PT-Co)	≤ 10	GB 3143

Gum Rosin Yellow

Gum Rosin yellow
Specification: CAS No.: 8050-09-7 ; Other Names: rosin ; MF: C20H30O2 ; EINECS No.: 232-475-7 ; Grade Standard: Industrial Grade ; Purity: 100% ; Appearance: Transparent or light yellow ; Application: daily ; Transparent: light yellow ;
Gum rosin of our packing details:
In galvanized iron drum, 225kgs net each drum
In kraft paper bag without liner, 25kgs net each bag
In polypropylene woven bag, 25kgs net each bag

Gum rosin is an important raw material for the manufacture of adhesive, coating, inks, rubber, soaps, paper etc.

Parameter	Grade
Standard: GB/T8145-8146-2003	X	WW	WG
APPEARANCE	Transparent	Transparent	Transparent
COLOR	Light Yellow	Pale Yellow	Yellow
SOFTENING POINT(R&B)°C	76.0	76.0	75.0
ACID NUMBER(mg KOH / g)≥	166.0	166.0	165.0
UNSAPONIFIABLE MATTER % ≤	5.0	5.0	5.0
ETHANOL INSOLUBLES % ≤	0.030	0.030	0.030
ASH CONTENT % ≤	0.020	0.020	0.030

Sebacic Acid

Sebacic acid
Specification: CAS No.: 111-20-6 ; Purity: 99.5% min ; Appearance: powder ;
USE:
This plant can provide the main raw material for polyamide resin such as Nylon 1010 and Nylon 610 , Nylon 810 and Nylon 9 and anti-frozen plasticizer DOS and DBS.
Quality Index:

Item	Specification
Item	A	B	C	D
Appearance	Granule	Granule	Granule	Powder
Content %(m/m)	99.5	99.5	99.5	99.5
Ash %(m/m)	0.02	0.03	0.05	0.03
moisture %(m/m)	0.15	0.3	0.3	0.3
APHA ≤	5	15	25	15
melt area	131-134.5	131-134.5	131-134.5	131-134.5

Methyl Acetate

Methyl Acetate
Specification: CAS No.: 79-20-9 ; Other Names: Acetic acid, methyl ester ; MF: CH3COOCH3 ; Grade Standard: Agriculture Grade, Industrial G. ; Purity: 99% ; Appearance: liquid ; liquid: colorless ;
- Methyl Acetate is Liquid oluble in water Flammable
- Specifications
Density 0.8786
Melting point 5.5 Celsius degree
Boiling point 80 Celsius degree
Refractive index 1.5011
Flash point -11 Celsius degree
Water solubility 0.18 g/100 mL
- A major use of methyl acetate is as a volatile low toxicity solvent in glues, paints, and nail polish removers.
- HS code: 27071000

1,3-propane Sultone

1,3-Propane Sultone
Specification: CAS No.: 108-46-3 ; Grade Standard: Industrial Grade, Medicine Grad. ; Purity: 99% ; color: white ; Molecular Weight: 122 ;

1,3-Propane Sultone

Items	Results
Appearance	Conforms
Specific Gravity	1.745
Distillation Range	102.3°C
Water	90ppm
Assay	99.53%
Assay	99.53%
Remarks	No free Iodine

Trioctyl Trimellitate

Trioctyl Trimellitate
Specification: CAS No.: 8013-07-8 ; Other Names: Trioctyl Trimellitate ; MF: 546.23 ; EINECS No.: 232-391-0 ; Grade Standard: Industrial Grade ; Purity: 98% ; Appearance: colorless ; Application: durable and heat plasticizer ; H. S. code: 38122000 ;
Name: Trioctyl Trimellitate
Molecular Formular: C33H64O6
Standard: Q/THG 008
Package: 200kgs net, in steel drug or HDPE drum

Stearyl Methylacrylate

Stearyl methylacrylate
Specification: CAS No.: 32360-05-7 ; Other Names: 2-Propenoic acid, 2-methyl-, octad. ; MF: C22H42O2 ; Purity: ≥95% ;
Stearyl methylacrylate ( SMA),2-Propenoic acid, 2-methyl-, octadecyl ester,
CAS NO.:32360-05-7

C22H42O2

Molecular Formula: C22H42O2 Molecular Weight: 324
M.P.:26 °C Density: 0.8
Appearance: White waxy solid and long-chain hydrophobics
Purity% ≥95.0
Water%≤0.2

Main Application: It can be used as textile finishing agent, auxiliary agent for leather shoes, plasticizer, acrylic resin, paint, printing ink and adhesive.

Packing& Storage: Packed in PE drum, 50kg/200kg/drum

Stored in cool place between-50~+35°C away from sunshine.

Dioctyl Phthalate

Dioctyl Phthalate 99.5%, 99.2%
Specification: CAS No.: 117-81-7 ; Other Names: Dioctyl Phthalate, DOP ; MF: C24H38O4 ; EINECS No.: 204-211-0 ; Grade Standard: Agriculture Grade, Food Grade, . ; Purity: 99.5%, 99.2% ; Appearance: Transparent liquid ; Application: plasticizer, mainly used in the pr. ;
Dioctyl Phthalate/ DOP (99.5%, 99.2%)

Specifications:

Index name	Value
Index name	Premium grade	First grade	Salable product
Color(APHA) ≤	30	40	120
Ester %	99.5	99.0	99.0
Acidity(Benzene dicarbonic acid) g/cm3	0.010	0.015	0.030
Loss on dry(125°C3hr)% ≤	0.2	0.3	0.5
Flash point(open) °C ≥	195	192	190
Sg D30 MD	0.982-0.988	0.982-0.988	0.982-0.988
Volume resistivity 0.0m ≥	0.20	0.20	0.30

Use:
It is an important and primary plasticizer, mainly used in the processing of PVC resins, chemical fiber resins, ABS resins and rubber. And plasticized PVC can be used in the manufacture of leatheroid,agricultural film,packing materials and cables.

Dibutyl Sebacate

Dibutyl Sebacate DBS
Specification: CAS No.: 109-43-3 ; Other Names: DBS ; MF: C18H34O4 ; Grade Standard: Industrial Grade ; Purity: 99% ; Appearance: Colourless or buff transparent oily. ; Application: plasticizer ;
Dibutyl Sebacate DBS

Index	Value
Appearance	Light yellow transparent oily liquid
Ester%	99
Color(APHA)≤	≤20
Acidity, g/cm3	≤0.05
saponification value(mgKOH/g)	352—360
Refractive index (20°C)	1.4385—1.4405
Flash point(open)oC ≥	180
Water content, %	≤0.15
Sodium,ppm(m/m)	≤1.0

Properties and uses
Colourless or buff,transparent oily liquid,b.p. 344~345°C,freezing point -10~-12°C,refractive index 1.440~1.443(20°C).
It possesses good solubility with various resins such as PVC,the polymer of chloroethylene and acetic ethylene,polystryrene,pyroxylin etc.
Used as a cold-resistant plasticizer,it is good in hot stability and light stability. It is often mixed with durable phthalate plasticizers in use.

Ethyl Propanoate

Ethyl Propanoate
Specification: CAS No.: 105-37-3 ; Other Names: Propanoic acid ethyl ester ; MF: C5H10O2 ; Grade Standard: Food Grade, Industrial Grade ; Purity: 99.50% ; Appearance: Colorless and transparent liquid ; Application: flavors for foods ;
Ethyl Propanoate

1. Appearance colorless and transparent liquid.
2. Content ≥99.5%(GC)
3. Humidity ≤0.10%
4. Acid value (mg KOH/g) ≤1.0 t

Pvc Resin

PVC resin
Specification: CAS No.: 9002-86-2 4 ; Other Names: Polyvinylchlorid Resin ; MF: -(- CH2-CHCL-)-n ; Grade Standard: Industrial Grade ; Purity: sg1 -- sg8 ; Appearance: white powder ; HS code: 39041000 ;
PVC resin k67 powder

Properties: It is thermoplastic, insoluble in water, gasoline and ethanol, expandable or soluble in ether, ketone, fatty chlorohy-drocarbons or aromatic hydrocarbons with strong anti--corrosiveness, and good dieletric property.

Name	PVC RESIN SG5
appearance	WHITE POWDER
SPECIFICATIONs
Property	Specification
Average polymerization	1100-1000
K Value	68-66
Viscosity(ml/g)	118-107
Impunity particle number(piece)≤	16
Surface Density,g/ml≥	0.48
Volatile(including water)%≤	0.40
Residue screened:0.25mm screen hole≤	2.0
0.063mm screen hole≥	95
Pearleye number,grain/400c≤	20
Absorbing volume(g) of elasticizer/100g PVC resin≥	19
White degree (160,10minlater),%≥	78
Rudimental chloroethylene volume,ppm≤	5

L-tyrosine Methyl Ester

L-Tyrosine Methyl Ester
Specification: CAS No.: 1080-06-4 ; Other Names: tyrosinemethylester ; MF: C10H13NO3 ; EINECS No.: 214-095-3 ; Grade Standard: Food Grade ; Purity: 99 ;
Methyl L-tyrosinate Basic information
Methyl L-tyrosinate
Synonyms: tyrosinemethylester;H-TYR-OME;ASINEX-REAG BAS 16578199;METHYL (2S)-2-AMINO-3-(4-HYDROXYPHENYL)PROPANOATE;L-TYROSINE METHYL ESTER;Methyl L-tyrosinate;(S)-2-AMINO-3-(4-HYDROXY-PHENYL)-PROPIONIC ACID METHYL ESTER;TYROSINE-OME
CAS: 1080-06-4
MF: C10H13NO3
MW: 195.22
EINECS: 214-095-3
Product Categories: Tyrosine [Tyr, Y];Amino Acids and Derivatives;Amino Acids 13C, 2H, 15N;Amino Acids & Derivatives;Aromatics;Amino Acid Derivatives;Peptide Synthesis;Tyrosine
Mol File: 1080-06-4.mol

Methyl L-tyrosinate Chemical Properties
mp 134-136 °C(lit.)

alpha 25 º (c=2.4, CH3OH)
storage temp. −20°C

Stability: Stable. Incompatible with strong oxidizing agents.
CAS DataBase Reference 1080-06-4(CAS DataBase Reference)

Safety Information
Hazard Codes Xi
Safety Statements 22-24/25
WGK Germany 3

HazardClass IRRITANT

Dop Dioctyl-phthalate 99.5%

DOP Dioctyl-Phthalate 99.5%
Specification: CAS No.: 117-81-7 ; Other Names: DOP, Dioctyl-Phthalate ; MF: C24-H38-O4 ; EINECS No.: 204-211-0 ; Grade Standard: Industrial Grade ; Purity: 99.5% ; Appearance: Transparent oily liquid ; Application: Coating Auxiliary Agents,Electroni. ; Color: colourless and tasteless ; MOL WT: 390.56 ; H.S. CODE: 2917.34 ;
Dioctyl Phthalate DOP:
Specifications:

Index name	Value
Index name	Premium grade	First grade	Salable product
Color(APHA) ≤	30	40	120
Ester %	99.5	99.0	99.0
Acidity(Benzene dicarbonic acid) g/cm3	0.010	0.015	0.030
Loss on dry(125°C3hr)% ≤	0.2	0.3	0.5
Flash point(open) °C ≥	195	192	190
Sg D30 MD	0.982-0.988	0.982-0.988	0.982-0.988
Volume resistivity 0.0m ≥	0.20	0.20	0.30

Use:
Dioctyl-Phthalate DOP 99.5% is an important and primary plasticizer, mainly used in the processing of PVC resins, chemical fiber resins, ABS resins and rubber. And plasticized PVC can be used in the manufacture of leatheroid,agricultural film,packing materials and cables.

Dibasic Ester Dbe

Dibasic Ester DBE
Specification: CAS No.: 95481-62-2 ; Grade Standard: Industrial Grade ; Purity: 99%min ; Appearance: clear and colorless liquid ;
DIBASIC ESTER(DBE)
Specific Gravity at 20/20: 1.092
Color, Apha Max: 50
Acidity, mg KOH/G Max: 0.30
Ester, wt. % Min: 99.0
-dimethyl apidate report: 25+/-5 %
-dimethyl glutrate report: 50+/-5 %
-dimethyl succinate report: 25+/-5%
Water, wt % Max: 0.10
Boiling Range(95%),: 196~230
Our packing is 220kgs/drum

Dimethyl Carbonate

dimethyl carbonate
Specification: CAS No.: 616-38-6 ; Purity: 99.9 ; Color (Pt--Co) No. : : 5 ; DMC content: 99.9% ; Methanol: 100 mg/kg ;
Dimethyl carbonate (DMC C3H6O3 ) is a colorless and transparent liquid. It is a perfect methylating agent ,carbonylating agent,methoxylating agent and methylolating agent with active chemical properties.It can be uesd into prodcing polypropylene carbonate .In pharmaceutical and pesticide,DMC can be used into producing ciprofloxacin and carbadox.Also it it a indispensable raw material to produce lithium battery electrolyte.Because of its excellent chemical and environmental property,recently DMC is acting as a good solvent for coating,paints ,ink,and adhesive substituting the benzene,xylene,ethyl Acetate,butyl Acetate,acetone,butanone,toluene,It is an ideal substitute for toxic substances such as phosgene ,dimethyl sulphate,and methyl chloroformate.Thus,it is a green chemical product.

Pentaerythritol Ester Of Rosin

Pentaerythritol ester of rosin XS-B100
Specification: CAS No.: 8050-26-8 ; Other Names: Pentaerythritol ester of rosin ; MF: C5H12O4/W99 ; Grade Standard: Industrial Grade ; Purity: 99 ; Appearance: transparent granular ; Application: used in ashesive, ink, painting, c. ; Type: Ester ;
1, Composition: top-grade rosin and pentaerythritol .
2, Properties: soluble in coal coke ester, petroleum serial solvents and turps.
3, Uses: widely used in adhesive,hot-melt adhesive, paint and ink.
4, Technical index:

Model	Appearance	Acid value	Chroma	Softening point	Solubility

XS-B100	granular	≤25	≤1	≥100	clear

5, Packing: packed in woven bags, net weight 25kgs each.
6, Payment:50% T/T in advance,50%T/T SEE COPY OF B/L ; L/C at sight.

High Quality Ethyl Formate 109-94-4

High quality Ethyl Formate 109-94-4
Specification: CAS No.: 109-94-4 ; Other Names: Ethyl Formate ; MF: C3 H6 O2 ; EINECS No.: 203-721-0 ; Grade Standard: Reagent Grade ; Purity: ≥98.0 ; Appearance: colorless clear liquid ; Application: solvent for cellulose nitrate,cel. ; color: colorless ; apperance: colorless clear liquid ; purity: ≥98.0 ; Boiling Point: 52.00 to 54.00 °C ; Water-solubility: soluble in water ; Melting Point: -81.00 to -80.00 °C ; quality: best ; price: competitive ; delivery time: quickly ; service: high ;
Ethyl Formate
Usage
· In industry, it is used as a solvent for cellulose nitrate,cellulose acetate, oils, and greases
· It can be used as a substitute for acetone.

Packing
·In 20kg plastic drum or as client's requirements

Specification

CP Specification
Item	Qualification	Item	Qualification
Purity ,%	≥98.0	Evaporation residue ,%	≤0.02
Density (20°C)g/ml	0.920~0.926	Boiling range(°C)	53.0~55.0
Refractive index(n20/D)	1.359~1.361	Moisture content	Qualified
Free acid (as HCOOH),%	≤0.15

Per 90 Penta Erythritol Of Gum Rosin

Per 90 Penta erythritol of gum rosin
Specification: CAS No.: 115-77-5 ; Other Names: penta erythritol ; MF: C5H12O4 ; EINECS No.: 204-104-9 ; Grade Standard: Industrial Grade ; Purity: 98% ; Appearance: white crystal powder ; Application: paint,coating,alkyd resin ; color: slightly yellow ;
1.Specifications:

Items	Pentaerythritol Ester of Gum Rosin	Pentaerythritol Ester of Hydrogenated Rosin
Items	PER-90	PEHR-100R	PEHR-100
Solubility (with toluene1:1)	Clear	Clear
Color (Fe-Co Scale) max	3~5	4~6	8~10
Acid Value,mgKOH/g, max	20	20
Softening Point (R&B), °C, min	90	95-102
Specific gravity,25°C/25°C	1.060~1.090	1.060~1.090

2.Properties and uses:
Pentaerythritol ester of gum rosin are made from gum rosin or light-colored rosin through esterification with pentaerythritol, used in adhesives, rubber products; Pentaerythritol ester of hydrogenated rosin are made from hydrogenated rosin or water-white hydrogenated rosin through esterification with pentaerythritol, used in pressure sensitive adhesives, hot melt adhesives and coatings.

3. Packing:
(1) Bag: Granule or Flake, Intertexture or kraft paper bag, 25kg net each bag.
(2) Packing specified by customers.

4. Technical specification:
The above technical specification (Q/SL07-2002) is formulated and revised by us. If there are changes, the latest specification will be executed and assured by contract.

Propylene Carbonate

Propylene Carbonate
Specification: CAS No.: 108-32-7 ; Other Names: 1,2-Propanediol cyclic carbonate ; MF: C4H6O3 ; EINECS No.: 203-572-1 ; Grade Standard: Industrial Grade ; Purity: 99.9%,99.5%,99.7% ; Appearance: Colorless Liquid or tiny yellow ; Application: high quality solvent ;
Propylene Carbonate
CAS No: 108-32-7
EINECS No.: 203-572-1
Molecular formula: C5H7O6
Molecular weight: 163.106

Propylene Carbonate

Cas No.: 108-32-7
Molecular formula: C4H6O3
Structure:

Appearance:Colorless Liquid or tiny yellow
Application:Propylene Carbonate is a high quality solvent for de-gassing purposes.It is used in petroleum processing,oil field and decarbonation of ammonium.It is also used as synthetic fiber finishing agent and color fixer for textile industry.It is also used as polymer solvent in polymer industry.
Quality Specification:

Item	Index
Item	High Purity Grade	Battery Grade	Resin Grade
Color(Pt-Co) Max	20	30	50
Purity% Min	99.9	99.7	99.5
Water Min	0.02	0.05	0.1
Density (g/cm3)	1.200-1.210

Packaging: Iron Drum, IBC drum, Isotank.

Methyl Salicylate

Methyl salicylate
Specification: CAS No.: 119-36-8 ; Grade Standard: Food Grade ; CAS No.: 119-36-8 ;
Methyl salicylate can offer effects of antiinflammation and pain-ease. It can be used in joint/muscle pain-ease plaster, tincture and oil agent. It can be used as solvent and intermediate pf insecticide, bactericide, polish agent, anti-copper agent, flavor, food, cosmetics, toothpaste, coating, ink, and fiber mordant.

Ethyl Acetate

Ethyl acetate
Specification: CAS No.: 141-78-6 ; Grade Standard: Reagent Grade, Other ; Purity: 99.5% min ; Appearance: Colorless, Clear liquid ; color: colorless ;
Ethyl acetate
Formula Weight: 88.11
Boiling point: 76-77°C
Melting point: -83°C
Refractive index: 1.3719
Flash point: -4°C
Appearance: Colorless, Clear liquid
Sales Specifications:

Item	Index	Analytical Method
Ethyl acetate % ≥	99.5	GB/T 12717
Acidity(by acetic acid) % ≤	0.004	GB/T 12717
Water % ≤	0.10	GB 6283
Density g/cm3	0.897-0.902	GB 4472
Evaporation deposits % ≤	0.001	GB 6324
Color(APHA) ≤	10	GB 3143

Packaging: 180kg net wt. In Mild Steel Drums.
IMDG Class: 3
Packing Group: II
UN No.: 1173
CAS No.: 141-78-6

Exporting Ethyl Acetate

Exporting Ethyl Acetate
Specification: CAS No.: 141-78-6 ; Purity: 99.5% ; UN No: 1173 ; IMDG Class: 3 ; NAME: ETHYL ACETATE ; Packing Group: II ;
Ethyl Acetate
TREAT CLIENT AS FAITHFUL FRIEND NOT PARTNER
you can search enjoy-chem with skype
A.High quality with SGS inspection
B.Competetor price .
C.Easy delivery.
D.Good service
Ms.Bessice (enjoy-chem)
SHIJIAZHUANG LATEEN CHEMICAL CO.,LTD.
NO.55,JIANGUO ROAD,QIAOXI DISTRICT,SHIJIAZHUANG,CHINA
TEL:0086-311-83028006
FAX:0086-311-83028007
Mobile:8613784023109
Before print this page, think about your responsibility and commitment with the ENVIRONMENT!

SPECIFICATION
ITEM	STANDARD	Analytical Method
Ethyl acetate % ≥	99.5	GB/T 12717
Acidity(by acetic acid) % ≤	0.004	GB/T 12717
Water % ≤	0.10	GB 6283
Density g/cm3	0.8970.902	GB 4472
Evaporation deposits % ≤	0.001	GB 6324
Color(APHA) ≤	10	GB 3143

IT IS SUCH A HAPPY THING TO DO YOU A FAVOR BESSICE ZHANG TRADE MANAGER:CN201185027

Trioctyl Trimellitate Manufacturer

Trioctyl trimellitate manufacturer
Specification: CAS No.: 3319-31-1 ; Other Names: Trioctyl trimellitate(TOTM) ; MF: C33H54O6 ; EINECS No.: 1 ; Grade Standard: Industrial Grade ; Purity: 99.0 % ; Appearance: transperant ; Application: Leather Auxiliary Agents, Plastic . ;
1, Best quality & competitive price
2, ISO facility
3, Guarantee efficient logistics

Physical Properties:
Empirical formula: C33H54O6
Structural formula:

Molecular weight: 546.78
Boiling point (°C): 414
Refractive index(25°C): 1.485-1.487
Appearance: transparent liquid
Sales Specifications:

Item	Index	Analytical Method
Ester % ≥	99.0	GB/T 6489
Acid value: mgKOH/g≤	0.20	GB/T 1668
Flash point(open) °C ≥	245	GB/T 6489
Density(p20°C), g/cm3	0.986~0.99 0	GB/T 1666
Loss on heat %≤	0.15	GB/T 1669-2001
Chroma(Pt-Co) ≤	60	GB/T 1664
Volume resistivity , Ω.m≥	5×109	volume resistance calcimetre

Packing: metal pail, net wt 200kg. 80drums in 20' container, sum 16 tons.

Dmds Dimethyl Disulfide

DMDS Dimethyl disulfide
Specification: CAS No.: 624-92-0 ; Other Names: DMDS Dimethyl disulfide ; MF: C2H6S2 ; EINECS No.: 210-871-0 ; Grade Standard: Industrial Grade, Medicine Grad. ; Purity: 99.5% min ; Appearance: Colorless or light yellow liquid ; Application: intermediate,activator ; purity: 99.5% min ; appearance: colorless or light yellow liquid ;
COMMODITY :Dimethyl disulfide DMDS

Specifications Dimethyl disulfide
CH3-S-S-CH3
Molecular formula: C2H6S2; Molecular weight: 94.2
Use: It is widely used in organic synthe
CH3-S-S-CH3
Molecular formula: C2H6S2; Molecular weight: 94.2

Use:
It is widely used in organic synthesis and pesticide intermediates; also used as corrosion inhibitors and scorch retarder of ethane depolymerizing furnace; as vulcanizing agent in the gasoline hydrogenation; as solvent, softening agent and plasticizer in rubber industry etc.

Package:
In 200kg plastic drum; or in 200kg iron drum; or in 21-23 cubic meters ISO tank.
Index:

Purity	99.5% min
Appearance	colorless or light yellow liquid
Methanethiol	≤0.015%
Specific weight(20/4°C)	1.062
Water content	0.06% max
M.P.	-84.72°C
Flash point (CC)	16°C
B.P.	108-110°C

Butyl Acetate

butyl acetate
Specification: CAS No.: 123-86-4 ; Other Names: secondary butyl acetate ; MF: C6H12O2 ; EINECS No.: 204-658-1 ; Grade Standard: Industrial Grade ; Purity: 99.0min ; Appearance: Colorless transparent liquid ; Application: Ester & Derivatives ; Colorless transparent liquid: C6H12O2 ;
,w/% Process By GB/T3729-2007
It is a esterification reaction of acetic acid with butanol.
Usage
Mainly used for
Paint solvents, thinners, solvents of various vegetable oils and resins.Also used to manufacture plastics and spices
,fruit flavors, the preparation of banana,raspberry,strawberry and cream flavors.
Specifications
butyl acetate

Item	Standard
Color	10max
Density(g/cm3)	0.878-0.883
Butyl acetate, %	99.0min
Water, %	0.1max
Butanol,%	0.2max
Acidity(by CH3COOH),%	0.005max
Butyl formate, w/%	0.2max
Butyl propionate, w/%	0.2max
Evaporation residue,w/%	0.005max

we can according to customers requirments.

Dimethyl Sulfate

Dimethyl sulfate
Specification: CAS No.: 77-78-1 ; Other Names: methyl sulfate ; MF: CH3) 2 SO4 ; EINECS No.: - ; Grade Standard: Agriculture Grade, Industrial G. ; Purity: 98.5 ; Appearance: colorless ; Application: intermediate ; colorless: liquid ;
This product in organic synthesis as a substitute of Halon for methylation agent is widely used in medicine, dyes, spices, pesticide industry and so on.

Ethyl Silicate

Ethyl silicate
Specification: CAS No.: 78-10-4 ; Other Names: ethyl silicate40 ; MF: C4H10O3Si ; EINECS No.: 201-083-8 ; Grade Standard: Agriculture Grade ; Purity: 40-42% ; Appearance: colorless transparent liquit ; Application: paint, dope adhesive, organic rubb. ;
Ethyl silicate
200kg metal drum,export grade: 200kg/galvanization metal drum(16 tons/container) Storage period: 12 months.

Quality

Index name	Index
Appearance	colorless transparent liquit
Chroma(APHA)	10
Specific gravityat 20° C(68° F)	1.05-1.07
Silicon dioxide content	40-42%
Acidity(as HCl)	0.01
Alcohol	1%
Other content	0-5ppm
Viscidity( 20°C)	4-7cps.

Use

paint, dope adhesive, organic rubber crosslink agent and others

Dimethyl Carbonate

Dimethyl Carbonate
Specification: CAS No.: 616-38-6 ; Other Names: Methyl Carbonate ; MF: C3H6O3 ; EINECS No.: 210-478-4 ; Purity: 99.8% ; Appearance: Colorless transparent liquid ;

	Dimethyl carbonate
CAS No.:	616-38-6 C3H6O3
Purity:	99.7%min
Description/Appearance	Colorless, transparent liquid
Water Moisture	0.04% MAX
Melting point	4
Boiling Point	90.3
Flashing Point	17
Payment Terms:	L/C,T/T
Minimum Order Quantity:	16.8 Ton
Supply Ability:	12000 Ton per Year
Package:	Galvanized iron drums, 20FCL=16.8MT ISO tank=20-22 ton
	3 days
Place of Origin:	China (Mainland)

Propylene Glycol Monomethyl Ether Acetate

Propylene glycol monomethyl ether acetate
Specification: CAS No.: 108-65-6 ; Other Names: 1-methoxy-2-acetoxypropane ; MF: CH3COOCH(CH3)CH2OCH3 ; EINECS No.: 283-152-2 ; Grade Standard: Industrial Grade ; Purity: ≥99.50% ;
Excellent industrial solvents with low toxicityand have strong solubility for polar and unpolar materials.

Item	PMA
Isomer ≤%	0.4
Water Content ≤%	0.05
Acidity(HAC)≤%	0.02
Distillation Range (760mmHg°C)	143.0-149.0
Specific Gravity (d420)	0.965-975
Color≤(Pt-Co)	10

(1) Propylene glycol monomethyl ether acetate are excellent industrial solvents with low toxicityand have strong solubility for polar and unpolar materials,which can be used for advanced paints,printing inks as well as some other polymers,including amido,methyl ester,ethyl,polyester,cellulose acetate,glycol acid resin,crylic acid resin,epoxy resin and nitrocellulose etc.
(2) Store in cool,dry well=ventilated location.
(3) Transport as hazard chemicals

****************************
Changyuan CHEMICAL
TEL:+86-510-81605029

****************************

Polybutylene Succinate

Polybutylene succinate
Specification: CAS No.: ASDF ; Other Names: PBS ; Purity: POLYMER ;
Polybutylene succinate (PBS) has injection molding,blister ,blow molding grades .
It is biodegradable polyester plastic which is excellent in modular processing.while on disposal they decompose to water and carbon dioxide in natural environment. it is internationally recognized as completely biodegradeble polymer.
Appearance: polymer of white crystal , Density:1.26, Melting point:115 cen deg.,
crystallinity:30-40%, tension yield:600%, yield strength:35MPa,
Strength at break:28MPa,

Application -
Packaging materials: Garbage bag,clothes bag,lable,bottole,tray and braket,clapboard;
Disposable materials:fast food baox,fork and knife,disposable cup;
Agricutural materials: composite film
construction and landscaping materials:landscaping peg adhesive plaster,lawn net,plant cover net
Fishery materials:fishing bait bag,cushion materials,fishing net,fishing belt and line
Daily materials:medicine carrier,injector and others

Any questions please feel free to ask us

Ethyl Butyrate

ethyl butyrate
Specification: CAS No.: 105-54-4 ; Other Names: ethyl butanoate,butyric acid ethyl. ; MF: C6H12O2 ; EINECS No.: 203-306-4 ; Grade Standard: Food Grade, Industrial Grade ; Purity: 98%, 99% ; Appearance: Colorless to pale yellow liquid ;

Product Name	Ethyl butyrate
CAS No.	105-54-4
Chemical formula	C6H12O2
Purity	98%, 99%
Appearance	Colorless to pale yellow liquid with banana-pineapple sweet odor
Acid value	≤1.0
Heavy metal(Pb)	≤0.001%
As value	≤0.0002%
Spec. gravity @ 25°C	0.870-0.878
Melting point	-93°C
Boiling point	120°C
Flashing point	25°C
Refractive index @ 20°C	1.391-1.394

Packing: in 180kg drum, 14.4 tons/20'FCL

Packing

Customer visit our factory

Solvents

Solvents
Specification:
Specifications: 1) Color (APHA): ≤302) Purity: ≥99.0%3) Moisture: ≤0.1%4) Acidity: ≤0.02%5) Specific gravity (d25): 1.405 - 1.505Outer packing: Metal drumsN.W.: 170kgG.W.: 191.5kgConveyance: Qty/20' FCL: 80 drums

Sec Butyl Acetate

Sec butyl acetate
Specification: CAS No.: 105-46-4 ; Other Names: secondary butyl acetate ; MF: CH3COOCH(CH3)CH2CH3 ; EINECS No.: 203-300-1 ; Grade Standard: Industrial Grade ; Purity: 99% ; Appearance: transparent ; Application: coating,ink,adhesive agent,thinner. ;

Items	Specification
Color Pt-Co	≤10#
Density (20°C), g/cm³	0.866~0.878
Evaporation residue, wt%	≤0.002
Purity, wt%	≥99
Acidity(as Acetic Acid), wt%	≤0.01
Water, wt%	≤0.1
Marks: No animal origins and free of Benzene

Applications:
a). Coatings: NC Coating, PU Coating, Acrylic Coating
b). Volatility solvent for printing ink
c). Solvent in adhesive agent
d). Solvent for thinner mixtures
e). Cleaning agent and extracting agent in medicine

Triacetin

Triacetin
Specification: CAS No.: 102-76-1 ; Grade Standard: Industrial Grade ; Purity: 99.5 ;
Kaixinchem has been one of the leading manufacturers and suppliers of triacetin since its foundation in 1986, We produce foundry/industry grade triacetin, also tobacco and food grade,

Not only we own large portion of chinese domestic market, We also supply to customers all over the world, mainly to North Europe, East and South Asia, South America....

About the quality, We never meet any issue about product quality since we export, Anyway,We have FDA certificate, Kosher and Halal certificate for different demands from customers, Also we are available if customer needs third party to test.

Pls check our specification below and do not hesitate to 5
Acidity(As HAC)

≤0.005
Moisture

≤0.05
Color
Pt-Co
≤15
Refractive Index(20)

1.430~1.433
Specific Gravity(20)

1.157~1.162
As

≤0.0003
Pb

≤0.001
Residue on Ignition

≤0.05

Epoxy Acrylate

Epoxy Acrylate
Specification: CAS No.: 55818-57-0 ; Grade Standard: Industrial Grade ; Purity: 80 ;

Items:	Specification:
Appearance:	Transparent Clear liquid
Color (Fe-Co):	1 MAX
Acid Value (mgKOH/g):	5 MAX
Viscosity(mpa.s):	4500 (40°c)

Use:
Gloss varnish for paper, wood coating, ink and vehicle for metal decoration.

Glycerine

Glycerine
Specification: CAS No.: 56-81-5 ; Other Names: glycerol ; MF: CH2OHCHCH2OH ; EINECS No.: 200-289-5 ; Grade Standard: Industrial Grade ; Purity: 99.5%~99.9% ; Appearance: colorless, transparent, odorless an. ; Application: industry, food, cosmetic ; Color: Colorless ; Odor: odorless with sweet taste ;
Packaging & Delivery

Packaging Detail:	250kgs in per iron drum, 20 MT in one 20'FCL
Delivery Detail	within 2 weeks after received your workable payment

Specifications
1.Name: Glycerol
2.Appearance: colorless, transparent, odorless and viscose liquid with sweet taste; can absorb moisture
Specifications
The Glycerine is from Natural palm oil , and it is so pure when it is refined from the plant processing.
Colorless, transparent, odorless, thick liquid, pharmaceutical preparation, solvent, moisture adsorbent, antifreeze and sweetener,ointment or suppository, explosive material, alkyd resin, polyester resin, and epoxy resin moisture adsorbent, anti-shrinkage agent, dispersant, sweetener, solvent., Moreover, it can be used in papermaking, cosmetic, leather, printing, photo, and metal processing.

Name	Index
Appearance	transparent, no suspension
Odor	no smell
Chroma(Hazen), MAX	20
Assay MIN	99.5
Density (20°C),g/ml MIN	1.2572
Sulfating Ash,% MAX	0.01
Acidity or Alkalinity (mmol/100g) MAX	0.064

High Purity Ethylene Carbonate

high purity Ethylene carbonate
Specification: CAS No.: 96-49-1 ; Other Names: Ethylene carbonate ; MF: C3H4O3 ; EINECS No.: 202-510-0 ; Grade Standard: Electron Grade, Industrial Grad. ; Purity: 99.99% ; Appearance: white crystal solid ; Application: lithium ion battery or medical ind. ;

	Ethylene carbonate (EC)
Molecular Formula	C3H4O3
Molecular Weight	88.1gr/mol
Technical Name	1,3-Dioxolan-2-one;Ethylene glycol carbonate
CAS No.	[96-49-1]
Boiling Point	248
Melting Point	35-37
Flash Point	145
Purity	≥99.99%(GC)
Moisture	≤20ppm(Karl-Fischer)
-OH(ppm)	≤100ppm

Export High Quality Ethyl Acetate

export high quality Ethyl acetate
Specification: CAS No.: 141-78-6 ; Other Names: Ethyl acetate ; MF: CH3COOC2H5 ; Grade Standard: Agriculture Grade, Electron Gra. ; Purity: 99.9% ; Appearance: colorless liquid ; Application: food,textile,paint,pharma,leather . ;
Ethyl acetate

name	ethyl acetate
cas	141-78-6
Purity	99.9%
MF	CH3COOC2H5
appreance	colorless liquid.
Uses	used in food,textile,paint,pharma,leather ,,,,

Glycerol Triacetate For Plasticizer

Glycerol triacetate for plasticizer
Specification: CAS No.: 102-76-1 ; Other Names: Triacetin ; MF: C9H14O6 ; EINECS No.: 203-051-9 ; Grade Standard: Industrial Grade ; Purity: 99.5% ; Appearance: Clear, colourless liquid,no impurit. ; Application: plasticizer ; Clear, colourless: liquid,no impurities ;
Glycerol triacetate
Specification:

ITEMS	UNIN	≥	≤
Appearance	Clear, colourless liquid,no impurities
Purity	%	99.5
Colour/Hazen	Pt-Co		15
Refraction Index(20)	--	1.430	1.435
Moisture	%		0.050
Acidity(as HAC)	%		0.005
Arsenic(As)	μg/g		1.0
Specific Gravity(20)		1.154	1.164

Dioctyl Adipate

Dioctyl Adipate
Specification: CAS No.: 103-23-1 ; Other Names: Dioctyl Adipate ; MF: C22H42O4 ; Grade Standard: Industrial Grade ; Purity: 98% ; Appearance: Oily liquid ; Application: PVC ; Property: achromatous ;
Appearance: achromatous, flavorless, transparent, oily liquid
Molecular formula: C22H4O4
Molecular Weight: 370.6
Fluid point: -68 deg.c
Boiling point: 214 deg.c
Flashing point: 190 deg.c
Viscosity: 13.7 mpa.s
Refractive index: 1.447
Solubility of water: 0.2%