Circuit Breaker

Moulded Case Circuit Breaker

1) DZ108 (3VE) series moulded case circuit breakers adopt the advanced technology of low voltage circuit breaker from Germany ; 2) It is the replacing product of type DZ5-20, DZ5-50, and DZ15-60 circuit breaker in the country ; 3) Rated voltage: up to 660V ; 4) Frequency: AC 40-60Hz ; 5) Rated current: 0.1-63A ; 6) The circuit breaker does the make and break operation to the motor, distribution wire or other electrical device in the underload of AC3, with the protection of overload and short circuit ; 7) Note: AC3 - The start, operation and break of squirrel-cage asynchronous generator

Mini Circuit Breaker

Our high breaking capacity miniature breakers are used to protect the circuit against short circuit and over load, and suitable for distribution systems of industrial and commercial lighting and electric machines. It has an elegant design, is lightweight and offers reliable performance, high breaking capacity, quick release and heat conduction installation. Its case and components are made of high fire retardant and shock resistant plastic and offer a long service life. It is mainly used for protection against over-load, short-circuit and leakage in AC 50Hz, 230V/400V circuits. Meanwhile, it can also be used for infrequently making and breaking electric appliances and lighting circuits under normal working conditions.

Isolator

It is applied to switch on and off the circuit of the terminal boxes or control motors, electrical apparatus, and lighting systems. The superior thermal dynamic stability supplies more protection to the circuits safety. Specifications: 1) Standard: IEC 60947-3 ; 2) Rated current: 32, 63, 100A ; 3) Rated voltage: 230V / 400V ; 4) Poles:1, 2, 3, 4P ; 5) Withstand voltage: 4KV ; 6) Endurance: electrical: 1,500 times; mechanical: 8,500 times ; 7) OEM service: available

High Breaking Capacity Mini Breaker

DZ47-63 high breaking mini breaker is applied to protect the overload and short circuit in the lighting and motor power distribution systems with rated frequency of AC 50Hz or 60Hz, single-pole voltage of 240V, and max rated current of 63A. Under normal condition, it maybe also be applied as the unfrequented make-break electric device and lighting circuit. This product has the following features: beautiful appearance, light in weight, excellent and reliable function. The breaking capacity is quite high and trips rapidly. The case body and the parts adopt the high fire-resistant and impact plastic that can use long life. Pole number is from 1 pole up to 4 poles.

High Voltage Outdoor Vacuum Breaker

Model VH7 vacuum breakers are outdoor high-voltage switchgears used in three phase AC 50Hz electric systems with rated voltage of 40.5kV. These products feature anti-condensation, anti-fouling, aging resistance, high temperature resistance, long service life, and stable, reliable, maintenance free operation. This model is primarily used for protection and control in industrial, mining and power facilities, particularly in locations that receive heavy use. A knob insulation method is used, employing high performance insulating cement to seal the quenching pot in a common porcelain bushing. The phase pole is airtight and has a drier inside to ensure highly reliable insulation. Designed to be used at an altitude of 2500m, it may also be used in dirty areas of class IV. Additionally, with movement and speed able to be effectively controlled with an omni-range buffer, the breaker and support frame are split for greater operational performance.

Miniature Circuit Breaker, Electron Leakage Circuit Breaker

Miniature Circuit Breaker: 1) Mainly applied to AC 50/60Hz circuits ; 2) With rated voltage of 230V or less, and rated current up to 32A. Electron Leakage Circuit Breaker: 1) 230 / 400V ; 2) Pole: 2P ; 3) Quantity: 5/40

Motor Protection Circuit Breakers

1) Rated current: 25 / 40 / 63A ; 2) Rated voltage: 240 / 415V AC ; 3) Pole number: 2P, 4P ; 4) Rated operating current: 0.03 / 0.1 / 0.3 / 0.5A

Earth Leakage Circuit Breaker

This earth leakage circuit breaker is used with circuits of 50Hz or 60Hz with rated voltages of 240V (single-phase) and 415V (2, 3 and 4 phases) whose rated currents are up to 100A. In the event of electric shock or excessive residual current the circuit will be broken in 0.1 seconds, automatically protecting persons and equipment.

Air Circuit Breaker Series

CDW7 multi-function circuit breakers are designed for protecting power distribution circuits and equipment against failures such as overload, under voltage and short-circuit.

Leakage Breaker

This type of breaker is applicable to a line of AC 50/60Hz, rated voltage 230V and rated current up to 32 A. It is widely used as branch switch for overload, short circuit and leakage protection in hotels, dwelling houses, hospitals, industrial and mining enterprises, etc.

Automatic Switching-Over Electrical Device

1) This electric device is applicable for a rated frequency 50Hz, rated working voltage of 400V, and rated current of 16A-100A. 2) In the power supply system of net-net and net-generator units there are economical and intelligent types. This product is a PC grade automatic switching-over electrical device that conforms to GB/T14048.11 and IEC60947-6-1 standards. 3) Testing qualified, it has strong environmental adaptability, high reliability, wide working voltage range, and 75%ue-120%ue. 4) With compact structure and small volume, which is merely 1/2 of GB standards for the same specification. 5) The economical type automatic switching-over electrical device uses a traditional contactor control as a substitute for intelligent controls and is able to automatically switch over (automatic commissioning-automatic resetting).

Medium Voltage Vacuum Circuit Breaker

1) The vacuum circuit breakers use vacuum interrupters embedded in resin poles ; 2) Embedding the interrupter in resin makes the circuit-breaker poles particularly sturdy and protects the interrupter against shocks, accumulation of dust and humidity ; 3) The vacuum interrupter houses the contacts and makes up the interrupting chamber ; 4) It serves as an indoor device and operates under the condition of rated 12/17.5KV three phase AC voltage and 50/60Hz frequency ; 5) It can control and protect electric devices of the industry and mine enterprises, generators and transformer sub-station, is a perfect product for frequent operating condition

Lightning Arrester

1) MOA rated voltage: 24KV ; 2) MCOV: 19.5KV ; 3) 1/4μs steep current impulse: 82KV ; 4) 8/20μs lightning current impulse: 72KV ; 5) 30/60μs switching current impulse: 62KV ; 6) 2ms rectangular current impulse withstand: 150A ; 7) 4/10μs high current impulse withstand: 65kA

Illuminated Rocker Switch

1) Voltage resistance: 2000V AC, 1MIN ; 2) Operating temperature: T85 ; 3) Operating life: more than 10,000 cycles ; 4) Contact rating: UL, CUL - 16 /20A, 250/125V AC, 1/2HP, 125V AC; VDE---16A, 250V ; 5) Knob colors: black, red, green, orange and blue ; 6) Base colors: gray, black and white ; 7) Switch crust dimensions: 32.2 x 16.4 x 21.8mm ; 8) Panel installation dimensions: 28.0 x 13.4mm

Hydraulic Magnetic Mini Circuit Breaker

1) Hydraulic magnetic MCB is mainly used to protect circuit against overload and short-circuit. 2) Adopting hydraulic magnetic trip instead of bimetal, it has a high sensitivity, and will not be affected by the ambient temperature. 3) They are mainly used for illumination and distribution in industry or domestic to protect circuit against overload and short-circuit. 4) Under the circuit of 50/60 Hz AC, 240V for one, two-pole; 415V for three-pole, they are complying with IEC 157-1973, and BS3871.

NF Domestic Fuse-Holder

1) STN fuse-holder for domestic protection ; 2) Rated voltage: 220V AC, rated current: up to 32A ; 3) NF standard ; 4) 10A for 8 x 23, 16A for 8 x 31, 20A for 10 x 25, 25A for 10 x 31, 32A for 10 x 38

Stannum Jointing Thread

We offer the stannum jointing thread without plumbum to pretect our environment, we also can supplier the thread mixed with silver or golden, the diametre is 0.8mm;0.9mm;1.0mm;1.1mm;1.2mm ;1.5mm or others; with packing 1 KG 1 core.

Residual Current Operated Circuit Breakers

1) Circuit: AC, 50Hz ; 2) Rated voltage: 400V ; 3) Rated current: 800A ; 4) Used for electric shock protection and indirect contact protection

Mccb Circuit Breaker

Ns series mould case circuit breaker is one of new type breaker which is adopted international advanced design, manufacture technology to develop, the rated insulating voltage is 950v. Suitable for AC 50hz(60hz). Rated working voltage 690v or below, rated working current is 12.5 to 630aof circuit. And use in distributing electric energy. On-frequent making and breaking in the normal conditions and protecting when circuit and installation are overload. Short circuit and lacking voltage. Rated shell-rack and the breaker which current is under 400a, take protecting effect when mouse cage motor's non-frequent start, breaking off working and protecting overload, short circuit and lacking voltage.

Surge Protector, Circuit Breaker

Surge Protector (10kA): 1) Continuance voltage: ~385V ; 2) Standard discharge current: 5kA ; 3) Max. current capacity: 10kA ; 4) Protection level: <1.8kV. Oil Cup Circuit Breakers available from 5A to 100A.

AHM1L Series Leakage Circuit Breaker AHM1L-400

It is a protective apparatus used to protect people from leakage, mainly used in the circuit of 50Hz, rated voltage 400V, rated current from 0 to 63A. It also can be used to distribute electricity and protect against overload and short circuit as well as for infrequent switchover of circuit. Specifications: 1) AC types ; 2) Rated voltage: 400V ; 3) Rated current: 50-600A.

Two Gang Multifunction Earth Leakage Circuit Breaker

1) Module design and standard guide installation ; 2) Current transformer uses a beryllium membrane alloy material and has high reliability

Surge Protective Device, Surge Protector, Lightning Switch, Arrester

810_100 BT P C 255V Main Features: *Especially for 3+1 lines in TT system, installed between the port N and PE *Standard single chip structure, high discharge capacity, pluggable *Quick response *Multifunctional terminals for connection of conductors and busbars *Core components are from international well known supplier Application: For use in LZP 0B-1 or higher boundary. Prevent low voltage devices from surge . Applied in Class Ⅱ(Class C) power supply system, according to GB18802.1-2002/IEC 61643-1:1998-02. Specifications: Technical data Rated voltage (max. continuous voltage) Uc 255V Nominal discharge current(8/20) In 40kA Max. discharge current Imax 65kA Voltage protection level at In Up ≤1.5kV Follow current extinguishing capability at Uc If 100Arms Lightning impulse current (10/350) Iimp 12kA Response time tA ≤100ns Operating temperature range -40℃…+80℃ Max. backup fuse 125A gl/gG Cross-sectional area 1.5mm2~25mm2(solid)/35mm2(flexible) Mounting on 35mm DIN rail Enclosure material purple thermoplastic, UL94-V0 Dimension 1 mod Test standards GB18802.1-2002; IEC61643-1:1998-02 Certification CE

6KV/10KV Metal Oxide Surge Arrester

Supply 6KV/10KV HY5W Metal Oxide Arrester, 20KV Metal Oxide Arrester, 30KV Metal Oxide Arrester, Lighting Arrester, Surge Arrester. Application is protect electrical equipment in power system from damage of over voltage and high voltage. Porcelain Housed . 6KV~30KV, Gap or gapless Metal Oxide Arrester is composed of metal oxide varistors, base, upper cover,grading ring etc. Polymer housed MOA manufactured by small size,lightweight,simple manufacturing process,good sealing,explosion-proof,long working life,wounded-proof,high pollution resistance and reduced line maintenance,etc. You may contact with me for detailed specification of surge arresters.

Outdoor high voltage Drop fuse

Outdoor high voltage Drop fuse is used for protecting for voltage transformer, protecting from overload amd short circuit for power circuit. Porcelain cut out fuse(Polymer drop out fuse) Certificate:ISO Standard:IEC Pay term:T/T.L/C RV:30-38KV RC:100(200)A Type : PRW15-12/100, PRW15-12/200 Rated Voltage (kV) : 12KV Rated Current (A) : 100A, 200A Breaking Current (A) : 12.5KA Impulse Voltage (BIL) Power- Frequency Voltage Leakage Distance (mm)

Mini Circuit Breaker

Mini Circuit Breaker
Specification: Type: Mini ; Poles Number: 2 ; Rated current(Ue): 230V/440V; 50/60Hz ; Breaking capacity: 10KA ; Certificate: CE ; Standard: EN60898(IEC898) GB10963-99 ; Electrial Life: not less than 8000 times ; Mechanical Life: not less than 2000 times ;
APPLICATION
The products of JDL7N belong to the advanced level of the nineties in the international instead of the
older generation of JDL7N. They have protective function as shortage as overload, and are used in
lighting distribution system in industry, commerce and dwelling, and protect fractional electric motors.
And they also have many merits of high protective grade(up to IP20), high break capacity, reliable
sensitive action,convenient, multiple assembling, long life etc. They are mainly adapted to the circuit
of AC 50HZ, 230V in single pole, 400V in double, three, four poles for protecting overload and short
circuit. Meanwhile, they are also used in turning on or off electric apparatus and light circuit under the
normal condition.

Rccb Residual Current Circuit Breaker 16a 2p + N

RCCB Residual Current Circuit Breaker 16A 2P + N
Specification: Type: Mini ; Poles Number: 2P+N ; Certification: ISO ;
RCCB Residual Current Circuit Breaker 16A 2P + N

Residual Current Circuit Breaker with Overcurrent Protection

Construction and Feature

Provides protection against earth earth fault/leakage current, short-circuit and overload
High short-circuit capacity
Provides complementary protection against direct contact by human body
Effectively protects electric equipment against insulating failure
Contact position indication
Provides protection against over-voltage
Provides comprehensive protection to household and commercial distribution systems

Technical Data
Type: electronic type
Residual current characteristics: AC
Pole No. : 1P,2P,3P,4P+N
Tripping curve: B, C
Rated short-circuit capacity: 10000A
Rated voltage: 230/240V AC
Rated frequency: 50/60Hz
Tripping duration: instantaneous<=0.1S
Electro-mechanical endurance: 4000 cycles
Connection terminal: pillar terminal with clamp
Connection capacity: Flexible conductor 10mm2
Installation: On symmetrical DIN rail 35mm Panel mounting

Moulded Case Circuit Breaker

Moulded Case Circuit Breaker
Specification: Type: Moulded Case ; Poles Number: 3P 4P ;
Application
SM0 Moulded Case Circuit Breaker is one of the most advanced type breakers in the
world, which adopts international advanced design and manufacture technology. They are
suitable for short circuit and overload protection for circuit of AC 690V 50/60Hz, rated current
from 12.5A to 630A.Its rated insulation voltage is 690V. It can make and break the nonfrequently
circuit in the normal conditions. It takes protect effect when mouse cage motors
non-frequent start, breaking off working and protecting overload, short circuit and lacking
voltage. It complies with IEC60947-2.

Hair Drier Alci

Hair drier ALCI
Specification: Type: Residual Current ; Poles Number: 2 ; Use: Leakage Current Protector ; Certificate: UL ;
ALCI (XY421-DV3)

Name	ALCI
Model	XY421-DV3
Specification	1) Rated Voltage:125VAC/250VAC
	2) Rated Current:13A/6.5A
	3) Rated Leakage Tripping Current :6mA
	4) Rated Leakage No.Tripping Current:4mA
	5) Max Tripping Time: ≤25ms
Flexible Cord	SPT-2, HPN,SVT 2C/105∝ 16AWG~18AWG,1.83m~3.6m
Tail	According to customers' require
Certificate	UL
Color	White,Pin,Black
Package	In Bubble
Feature	1) ALCI can auttomatically cut off the electricity supply within dozens of milliseconds ro prevent human from electric shock and loss of wealth when a fault current to groud of appliance connected with ALCI plug
Feature	2)ALCI can prevent impact failure on appliance by surge voltage and thunder
Application	ALCI is widely appled for leakage protection of Americanand North American Appliances,such as Hair Dryer,Hair Iron,Electric Jaw,Electric Water Heater,Electric Cooker,Refrigerator,Dish Washer and so on

Miniature Circuit Breaker

ST-1020A Miniature Circuit Breaker
Specification: Type: Mini ; Poles Number: 1 ;
ST-1020A Miniature Circuit Breaker
Specification:
1) Rating current: min. 5A, max. 50A
2) Working voltage: min. 5VDC, max. 50VDC
3) Application scope: it is widely used in the automotive industry Electrical goods, winch machine, DC power equipment, electric vehicles, chargers, motor , And other electrical products overcurrent protection of occasions.
5)Current: 5A 10A 15A 20A 25A 30A 35A 40A 50A

Ell Residual Current Device

ELL Residual Current Device
Specification: Type: Residual Current ; Poles Number: 1P+N, 3P+N ; Standard: IEC61008, EN61008 ; Rated Current(In): 16,25,32,40,63,80A ; Rated Voltage(Un): 230V, 400V ; Type of terminal: lug type ; terminal capacity: : cable up to 35mm2 ;
RCCB

Features:

Merits:
This series of Residual Current Circuit Breaker are designed with novel idea. In addition, our products are manufactured by superior materials and high technology, which should attract more customers to you.
We offer all kinds and technological structures of products as you suggest and require them to be designed.

Plug-on Circuit Breakers

Plug-On Circuit Breakers
Specification: Type: Mini ; Poles Number: 3 ; Certification: CE ;
The SQD circuit breaker comes in a compact 3/4 inch wide format for one-pole circuit breakers, helping minimize panel space and footprint. The SQ-D exclusive quick-open protection is standard on all 15 A and 20 A circuit breakers-trip reaction within 1/60th of a second. No other circuit breaker trips faster.

A comprehensive selection of 10kA rated circuit breakers is available including:
1) SQD one-pole standard circuit breakers (10A to 70A)
2) SQD two-pole standard circuit breakers (10A to 200A)
3) SQD three-pole standard circuit breakers (10A to 100A)

Mcb

MCB
Specification: Type: Mini ; Poles Number: 2 ;
Number of Poles:1P, 1P+N, 2P, 3P, 3P+N, 4P
Rated Current (A):1, 2, 3, 4, 6, 10, 16, 20,25, 32, 40,50, 63
Breaking Capacity (A):6000, 4500
Rated Voltage (V):230/400
Rated Frequency:50/60Hz
Endurance:≥4000
Circumstance Temperature:-5°C~+40°C
Electrical Life:no less than 6000 operations
Mechanical Life:(O-C) no less than 20000 operations
Protection Degree:IP20

Magnetic Hydraulic Circuit Breaker

magnetic hydraulic circuit breaker
Specification: Type: Magnetic ; Poles Number: 1 ; Function: magnetic hydraulic circuit breaker ;
Series CVP-SM Hydraulic Magnetic Circuit Breakers

Product name CVP-SM series circuit breaker for equipment
Meet the criterion IEC 60934GB 17701UL1077
Rated voltage DC80VAC250V
Rated current 0.5-30A
Breaking capacity 1000A
Isolation function YES
Poles 1
Ambient temperature -40-+85
Mechanical life 10000 operations
Certificate CCC UL1077 UL489 CE TUV CSA
Accessory Auxiliary contact for option;
Connection mode: screw-in/pluggable
Trip characteristic: short;medium;long(5-30A,provide protection from overload,short-circuit,also could be used to make and break the circuit not frequently.The breaker could be widely used for equipments provide protection of circuit,power equipment,communication equipment,railway transportation system,telecommunications systems,medical equipment,telecommunication power and UPS equipment and industrial automation system against overload current and short-circuit current.

Applications:
Lighting Equipment

Power Supplies

Computer Terminals

Small Generators

Entertainment Systems

Vending Machines

Office Machines

Telecom Power Distribution

Railway Signaling Systems

Mcb Mini Circuit Breaker

DZ47/C45N mcb mini circuit breaker
Specification: Type: Mini ; Poles Number: 3 ;
Application:
DZ47/C45 mini circuit breaker/MCB:
1.Model:DZ47-63,C45N
2.Standard:IEC60898
3.Function:overload and short circuit protection
4.Rated voltage:240/415V
5.Rated current: 1~63A
6.Pole number:1P,2P,3P,4P
7.Breaking capacity: 4.5KA
8.Curve: B,C,D
9.Used for unfrequently switching on&off electric equipment and lighting circuit in normal case.

3p 250a Mccb

BDM3T 3P 250A MCCB
Specification: Type: Moulded Case ; Poles Number: 3 ;
BDM3T Moulded Case Circuit Breaker ( MCCB )
Application
BDM3T moulded case circuit breaker is suitable for circuit AC 50Hz/60Hz, rated voltage up
to AC 660V, rated operating current up to 250A.It features normal structure, reliable
performance, high breaking capacity, used for power distribution and protecting the circuit
and electrical equipment against overload and short circuit. It complies with standard of
IEC60947-2.

Type		BDM3T-160	BDM3T-250
Pole		3	3
Rated Current ln(A)		16-160	100-250
Rated operating voltage Ue(V)(50/60Hz)		690	690
Rated insulation voltage Ui(V)		800	800
Rated impulse withstand voltage Uimp(KV)		8	8
Utilisation category		A	A
Rated limited Short-circuit Breaking Capacity Lcu(KA)	220/230V	25	50
	380/415V	16	36
	400V	10	25
	500V	8	20
	690V	3	5
	500V-3Poles in series	16	36
Rated short- circuit breaking capacity ics		100	75

Fcl9-2p Rccb Elcb

FCL9-2P RCCB ELCB
Specification: Type: Moulded Case ; Poles Number: 2 ; color: white ;

RCCB of FCL9-2p(AC Type )Residual Current Circiut Breaker without over current protection conform to the sandards of GB16916.1,IEC1008,SB4293ect.It is used in industrial &mining enterprises,Commercial buildings and housing for protection of people electric equipment from electric shock hazard ,and also can be used for unfrequent switchover of circuits under normal conditions.
We have FCL-2P(AC-Type) series product
Rated voltage:240V
Rated current:10A,16A,25A,32A,40A,63A,80A,100A
Operating current for earth leakage:10MA,30MA,100MA,300MA,500MA

This is our new type!

Surge Protection Device

Surge Protection Device
Specification: Certification: CE, RoSH, ISO9001 ;
Application:
TY6 series surge protection device suit for the AC 50Hz/60Hz, for the TT, TN-S, TN-C, and IT, not over 380V. It is used to protect the direct or indirect thunder influence or other instantaneous over-voltage surge. This protect is mainly used in house, third industry and industry field for surge protection. Thia product is comply with GB18802.1-2002; IEC 61643-1:1998.

Specifications:
1) Protection class: C, IEC II CLASS
2) Composite type: 1P, 2P, 3P, 4P, 1P+N, 2P+N, 3P+N, 3P+NPE
3) Max. continuous operating voltage (Uc): 255V-440V
4) Nominal discharge current (8/20μs) (In): 20kA, 30kA
5) Max. discharge current (8/20μs) (Imax): 40kA, 60kA
6) Voltage protection level (up): ≤1.5kV- ≤2.0kV

TY6 series have derivative composite type: 1+NPE, 2+NPE, 3+NPE.
TY6 series can add remote signal control function.

Mcb Mini Circuit Breaker

BKN mcb mini circuit breaker
Specification: Type: Mini ; Poles Number: 3 ; Type: Mini ; Poles Number: 1P,2P,3P,4P ; Certificate: CE/ISO9001/ROHS ; Superiority: Competitive price, Punctual Delive. ; Current: 1,2,3,4,6,10,16,20,25,32,40,50,63 ;
BKN mcb mini circuit breaker

Application

BKN series circuit breaker is used in lighting distribution system or motor distribution system for protection overload and short-circuit in the system. The product is neoteric in structure , light in weight, reliable and excellent in performance. It has high breaking capacity, can trip quickly, and ites case and items are adopted by high fire-resistant and shockproof plastics. The product, with long life, is mainly used in AC 50 Hz / 60Hz single pole 230V or two, three , four-pole 400V circuit for overload and short-circuit protection as well as unfrequent on and off switching electrical equipment and lighting circuit in normal case. The products comply with IEC 60898.

Specifications

Number of poles	1P, 2P, 3P ,4P
Rated current (A)	1,2,3,4,6,10,16,20,25,32,40,50,63
Breaking capacity (k A)	6000
Rated voltage (V)	230/400
Rated frequency (Hz)	50/60Hz
Endurance	≥4000
Circumstance temperature	-5~+40
Electrical life	no less than 6000 operations
Mechanical life	(O-C) no less than 20000 operations
Protection degree	IP20

SF1-G3
Specification: Type: Mini ; Poles Number: 1 ; Black body: white knob ;
MCB SF1-G3 NEW Hydraulic magnetic mini circuit breaker is mainly suitable for overload and short circuit protection. It adopts hydraulic magnetic trip instead of bimetal. So it has a high sensitivity and the ambient temperature does also not affect it. It is especially used for illumination and distribution in industry and commerce. They are mainly used for overload and short circuit protection within the circuit of AC 50/60Hz, rated voltage of single pole or double poles up to 240V, three poles up to 415V. They can also be used for an unfrequented switchover of the circuit and illumination under normal conditions. They comply with IEC 157-1973 BC4752-1977 and BS 3871.

Intelligent Air Circuit Breaker

Intelligent Air Circuit Breaker
Specification: Type: Air ; Poles Number: 4 ;
Application:
ZLW1series intelligent air circuit breaker, is generally mounted in low voltage switchboard as main switch for protection. Its reproductive products: ZLW1 series isolators installed in distribution circuit to make and break the circuit for isolation. Its per formances reach up to the international similar products.
1.Ratecurrent 630~5000A;
2.short circuit breaking capacity 80~120KA(rms);
3.Rated working voltage AC690V and below;
4.3 poles and 4 poles;
5.Draw-out type and fixed type;
6.inverse feeders (incoming and outgoing cable)mounting available;
7.Multiple intelligent controllers provide different functions.

R80m High Breaking Rccb Residual Current Circuit Breaker

R80M high breaking RCCB residual current circuit breaker
Specification: Type: Residual Current ; Poles Number: 2 ; Standard: IEC/EN60898-1 ;
Electromagnetic earth leakage circuit breaker is a kind of protective device against residual current,is suitable to the circuit of AC 50/60Hz,rated voltage up to 400V,rated current to 100A .It is mainly used to protect human safety from electrical shock and prevent fire disaster caused by residual current due to damaged equipment.It also can be used in the infrequent on-and-off switching operation under normal case.This circuit breaker is mainly applied to industry ,mine,building,household,hotel and other similar locations.
1.In compliance with IEC/EN61008-1.
2.Bliateral busbar wiring capabilities to adapt to the wider use of premises.
3.Maximum connecting ability of 35SQMM,wiring torque 3.5Nm.
4.Protection class :IP20 .

Ce Circuit Breaker

CE circuit breaker
Specification: Type: Residual Current ; Poles Number: 2 ;
CDL7 series CE residual current device is designed for electric shock protection
and human indirect contact protection, and electric equipment protection whenhuman body touching electricity or electric network leak current exceeds stipulated
value, in household or similar uses with AC 50HZ, rated working voltage400V and below, rated current up to 63A, without relationship to line voltage. It
is widely used in all kinds of fields, such as industry, business, civilian household
and so on.Applicable Standards:IEC61008-1 Residual current operated without integral overcurrent protection of household
and similar uses(RCCB)Technical Data:1) Number of poles: 2P & 4P2) Type:A,AC3) Rated current: 10A,16A,25A,32A,40A,63A,80A,100A4) Rated frequency:50HZ5) Rated operating voltage: 230V,400V6) Rated residual actuating current:30mA,100mA,300mA7) Level of protection:IP20

High Quality Protection Circuit Breaker

GK65N high quality protection circuit breaker
Specification: Type: Mini ; Poles Number: 2 ; Safe: Long life ;

Construction Features of GK65N high quality protection circuit breaker
The GK65N series miniature circuit breaker, isolating switch, protectiong switch has compact construction,in the width of 18mm,it has two poles(P+N) with high breaking capacitysmall volume , which is specially suitable for household and leakage current circuit breaker. Zero line and fire wire cutting at one time, stopping human and fire danger resulted by zero line and fire wire reversed, it is the most perfect electricity distribution protection stitch in recent civil house field.
This product accords with IEC60898 and Gb10963 standards.

Main Technical Parameters GK65N high quality protection circuit breaker

Model	Rated Current (A)	Poles	Rated Voltage (V)	Breaking Capacity (A)
C D	6, 10, 16, 20, 25, 32	1P+N	230	3,000

Current Overload Protector

current overload protector
Specification: Type: Mini ; Poles Number: 2 ; certification: VDE ,CSA,UL ;
over current protector 88 series
Engineering Information:
Rating:3 Amp-25Amp
Input power:125/250 Vac 50Vdc 50-60Hz
Interrupting Capacity:1000 Amp × 125Vac 200Amp ×250Vac
Dielectric Strength: 1500Vac 1minute
Resettable Overload Capacity :10 times rated current
Voltage Drop: Less than 0.25V
Insuiation Resistance:>500Megaohms
Reset Time: Within 60 seconds
Temperature Rise at Terminal Block: Less than 65oC at 100% of rated curent appiled continuously at 25oC
Contact Endurance: 125Vac×150% of rated current >500 cycles
Calibration(25oC)
100% of rated current:Hold,No-Trip
150% of rated current:Trip in 1 Hour
200% of rated current:5-25 seconds Trip
300% of rated current:1.6-4.8 seconds Trip
Current Rating in Amp Maximun Resistance in ohms
3-4Amp <0.05
5-6Amp <0.04
7-8Amp <0.025
9-11Amp <0.02
12-13Amp <0.01
14-16Amp <0.008
17-25Amp <0.007

Dz47 Miniature Circuit Breakers

DZ47 miniature circuit breakers
Specification: Type: Mini ; Poles Number: 3 ; DZ47 series miniature circuit breakers: DZ47 se. ;
DZ47 series miniature circuit breakers
C45N series circuit breaker is used in lighting distribution system or motor distribution
system for protecting overload and short-circuit in the system. The product
is novel in structure, light in weight, reliable and excellent in performance.

Its case and body adopt high fire-registrant and shockproof plastic. The product,
with long life, is mainly used in AC 50Hz/60Hz, single-pole 240V or two, three,
four-pole 415V circuit for overload and short-circuit protection as well as for
infrequent on and off switch electric equipment and lighting circuit in normal
case. This product conforms to GB10963, IEC60898, and BS3871 standard

Residual Current Circuit Breaker

Residual current circuit breaker
Specification: Type: Residual Current ;
The product serves in the line od AC 50/60HZ, rated voltage 230V and rated current up to 30A to automatically and immediately cut off power once someone suffers from electric shock or leakage current above specified valve.
The circuit-breaker can also function as overload and short-circuit protection and unfrequent changeover of line under normal condition.
The products is conformity with GB16917.1, IEC61009-1 standards.

Rated current	6A,10A,16A,20A,25A,32A
Rated residual operating current	0.03A,0.1A
Tripping characteristics	C
Icn	6000A
Rated residual current operated making and breaking capacity Im	500A
Rated residual non-operated current	Ino:0.5In

Circuit Breaker

circuit breaker
Specification: Type: Moulded Case ; Poles Number: 3 ;

1,circuit breaker(MCCB,breaker)

The rated value and ultimate Value for the Main Circuit
The rated insulation voltage for this series of circuit breaker is 690V,the rated operating voltage is 600V, the rated frequency is 50Hz, the othe rated
values for the main circuit, please see Table 2

Table 2 The Rated Values of MCCB

Rated Current of Frame InmA	Conventional Thermal current Ith A	Testing Voltage V	Breaking Capacity KAVirtual value		Pole Number	Rated Current of MCCB InA

EA103	100	AC 600V AC 500V AC 460V AC 415V AC 380V AC 230V AC 250V	22 25 35 35 35 50 20	11 13 18 18 18 25 10	2P 3P	5.10.15.20.30.40.50.60.75.100

Overload Protector

Overload protector
Specification: Type: Moulded Case ; Poles Number: 3 ; color: up to customers`optional ;
Overload protectors' Specifications :

1)Contact Resistance ∠20mΩ

2)Rated Voltage 125/250VAC UL1077 ; 250VAC EN60934

3)Overload open circuit-time 5-20 seconds

4)Reset time 1-20 seconds

5)Rated Current 3A-20A

6)Electrical Life ≥6000 times

7)Environmental Temperature 25oC

8)Relative Humidity 98%

Prcd Safety Plug Leakage Protection Circuit Breaker

PRCD safety plug leakage protection circuit breaker
Specification: Type: Residual Current ; Poles Number: 3 ; Type: Electrical Plug ; Grounding: Standard Grounding ; Application: Residential / General-Purpose ; Rated Current: 16A ; Color: red/white/black/yellow ;

The RCD detailed discription:
portable RCD plug for industrial/construction site use
1 Rated supply voltage:230V
2 Rated current:16A,10A
3 Operating frequency:50/60HZ
4 Trip time:<0.03S
5 Tested according to BS7071 and BS1363 standards
6 Built-in TEST and RESET buttons
7 Low voltage release

Switch Disconnector

Switch Disconnector
Specification: Type: Moulded Case ; Poles Number: 1 ;
The product is suitable for power distributions and control circuits which are used in AC50/60HZ,releated voltage is up to 400V.It can mainly used as the chief switch in the erminal combined electrical equipments as well as used for unfrequent control all kinds of small power equipments and lightings.

High Voltage Circuit Breaker

High voltage circuit breaker
Specification: Type: High Voltage ; Poles Number: 3 ; Mounting type: Indoor ;
Technical parameter:

Name		Unit	Number value
Rated voltage		KV	12
Rated insulated level	1min work frequency, dure voltage(efficient value)	KV	42
	Thunder and lighting assault, dure voltage(Peak value)	KV	75
Rated frequency		Hz	50
Rated current		A	0-0.3s-CO-180s-CO
Rated short-circuit open current		KA	630	1250
Rated short-circuit close current		KA	20	25
			25	31.5
The times of open and close Rated short-circuit current		Times	50	63
			63	80
The continual time of Rated short-circuit		s	4
The life of mechnical		Times	20000
The rated operating sequency			Depart-1-close open-t1-close

Mq45-63 Rccb Residual Current Circuit Breaker

MQ45-63 RCCB Residual Current Circuit Breaker
Specification: Type: Earth Leakage ; Poles Number: 1P+N ; Color: Any ; Quality: Trustable ;
RCCB Residual Current Circuit Breaker with Overcurrent Protection

Construction and Feature

*Provides protection against earth earth fault/leakage current, short-circuit and overload
*High short-circuit capacity
*Provides complementary protection against direct contact by human body
*Effectively protects electric equipment against insulating failure
*Contact position indication
*Provides protection against over-voltage
*Provides comprehensive protection to household and commercial distribution systems

Technical Data
*Type: electronic type
*Residual current characteristics: AC
*Pole No. : 1P+N
*Tripping curve: B, C
*Rated short-circuit capacity: 10000A
*Rated voltage: 230/240V AC
*Rated frequency: 50/60Hz
*Tripping duration: instantaneous<=0.1S
*Electro-mechanical endurance: 4000 cycles
*Connection terminal: pillar terminal with clamp
*Connection capacity: Flexible conductor 10mm2
*Installation: On symmetrical DIN rail 35mm Panel mounting

Car Power Circuit Breaker

Car power circuit Breaker
Specification: Type: Moulded Case ; Poles Number: Twin ;
Features:
1- High current circuit breaker
2- Manual reset
3- Gold plated bolts and screws
4- Bakelite cover
5- Waterproof

AMP's available:
12FH85-70 70 AMP
12FH85-100 100 AMP
12FH85-150 150 AMP
12FH85-200 200 AMP
12FH85-250 250 AMP
12FH85-300 300 AMP

!!!6ka 1p Mini Circuit Breaker

!!!6KA AL7 1P Mini circuit breaker
Specification: Type: Mini ; Poles Number: 1 ; color: white ; Rated Voltage: 110/230/400V ; Rated frequency: 50/60Hz ; Rated Interrupting capacity: 10KA ;
New6KA AL7 1P Mini circuit breaker
Pole:one pole,two pole,three pole,four pole
Rated voltage:110/230/400V
Rated frequency:50/60Hz
Rated short-circuit Interrupting capacity:10KA
The products is according to standard:63A less than:IEC60898 GB10963 80-100A:IEC947-2 GB14048.2

Overload Protector

Overload Protector HT-01A-101 waterproof type
Specification: Type: heat-miniature ; Poles Number: Other ; Material: Plastic shell, silver contact ;
The products can be used in combination sockets,power switch,multifunctional cockets,generator and other equipment etc.

Technical Parameter

Rated current: 3A-25A
Rated voltage: 125/250Vac 50Vdc 50-60HZ
Breaking capacity: 1,000A×125Vac, 20A×205Vac
Insulation withstand voltage testing: 1,500Vac/min
Reset switch overload capacity: 10times current
Lowest voltage: Less than 0.25V
Turnaround time: In 60seconds
Insulation resistance: > 500Vdc×100MΩ
Line terminal temperature: 100% test under the 25oC, temperature rise
less than 25oC
Contact life testing: 125Vac×150% current test more than 500cycles

Testing standard (25oC)

100% of rated current: hold, No-trip
150% of rated current: Trip within 1 hour
200% of rated current: Trip within 5-50seconds
300% of rated current: Trip within 1.6-4.8seconds

Gardy Residual Current Circuit Breaker

Gardy residual current circuit breaker
Specification: Type: Earth Leakage ; Poles Number: 2 ; 2 Poles and 4 Poles: Grey ;
PG residual current circuit breaker (gardy circuit breaker, gardy rccb) is suitable for AC 50/60Hz, 230/400V circuit, prevents from overloading, short-circuit etc. On the occasion of shock hazard or earth leakage, it will trip immediately. At the same time, the rated current of overload protection can be adjustable.

Technical Data

Item	Adjustable Residual Current Circuit Breaker
Number of Poles	2P	4P
Rated Insulation Voltage, Ui	230/400V
Rated Current, Ie, (A)	5-15A (5, 10, 15), 10-30A (10, 15, 20, 25, 30), 30-60A (30, 45, 60)
Leakage Current (A)	300mA, 500mA
Non-Leakage Current	150mA, 250mA
Standard	NFC61450

Mccb

MCCB
Specification: Type: Moulded Case ; Poles Number: 4 ; Color: Black ;
FPIM2-1250A Moulded Case Circuit Breaker

1 , Working condition
1 , the installation altitude less than 2000m
2 , the surrounding temperature from -5°C ~ +40°C
3 , in the non-explosive condition . or without adequate erosion and destruction of gas and dust conductive area .
4 , without rain and snow invade
5, pollution level 3
6, install type 3
circuit breaker installation
the basic installtion of circuit breakers in mounted vertically , also can be cross-loaded

2, Certificates
CE, CCC, ISO9001

3, Techinical Data

Products Name		FPIM2-1250 (FARPHIE) Moulded case circuit breaker (MCCB)
Advantages		compact , small size , high short-circuit breaking capacity ,no flashover
Suitable AC		59HZ
Rated insulation Voltage		690V
Rated working voltage		660V(690V) or below
Rated Current		12.5A~1250A
DC		250V or below
Standard		IEC60947-2,GB-14048.2,GB-14048.4
Installation		mounted verticalyy or cross-loaded
Breaking capacity rating		E , S ,M , H, L
Pole No.		2P~4P

Led Spot Led Plug And Socket

LED Spot LED Plug and Socket
Specification: Specifications: Male and Female ; Color: white or Black ; Connection: 250V ; Current: 7A ; Cable length: 1500mm ; Connector Material: Nylon66 UL94V-O or V-2 ; Cable: VDE H03VVH2-F 2 x 0.75mm2 ; Certificate: SGS,RoHs Approval ;
LED Spot LED Plug and Socket
Details OF Spotlight Socket

Part NO.:AMP-HV
Suitable Distributor: MINI AMP Distributor L801A, L801B L802A L802B

Connection: 250V
Current:7A
Connector Color: White or Black
Fire Rating: V-0
Connector Material: Nylon66 UL94V-O or V-2
Cable: VDE H03VVH2-F 2 x 0.75mm2
Cable Length: 1500mm
Application: working with led driver, led power supply. led lights.

This LED Plug and socket are widely used in the LED lighting system in European families.

Surge Protector For Solar Photovoltaic System

OBV5 surge protector for Solar Photovoltaic System
Specification: Type: Mini ; Poles Number: 3 ;
Product DescriptionSurge Protection for Solar Photovoltaic (PV) SystemThe OBV5-C40 series Surge Protection are designed to protect against lightning surge voltages in photovoltaic power supply networks. These units must be installed in parallel on the DC networks to be protected and provide common and differential modes protection. The OBV5-C40 series is available for the main operating voltages in photovoltaic: 1000 Vdc. The use of OBV5-C40 series Surge Protection is recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long. The electrical diagram of the OBV5-C40 series is based on high energy MOVs equipped with specific thermal disconnectors and related failure indicators. The OBV5-C40 series is made with plug-in modules to allow a fast and easy maintenance in case of failure (disconnection from the DC network).
Demension

Basic Circuit Diagram

Vs1 Circuit Breaker

VS1 circuit breaker
Specification: Type: High Voltage ; Poles Number: Other ; 12KV: VS1 ; indoor: switchgear ;

All parts are made by ourself. High quality, competitive price.It is used for indoor switchgear. It is suitable to control and protect transmission and distribution system such as electric network equipment and industrial & mining industry etc as their protection and control unit.

Features:

Rated voltage (KV)	12
Rated Current (A)	630
Rated Dynamic current (KA)	50
Rated Thermal current (KA)	20

Type Miniature Circuit Breaker

DZ47-63 Type Miniature Circuit Breaker
Specification: Type: Mini ; Poles Number: 3 ;
Specification:
Certificate; SEMKO, CB, CE
Satandard ranges of instantaneous tripping: B-type, C-type, D-type.
Rated voltage(V): 230/400
Rated current(A): 6, 8, 10, 13, 16, 20, 25, 32, 40, 50, 63.
Rated frequency(Hz): 50/60.
Rated short-circuit capacity: 6000A(In<=40A), 4500A(In=50A/63A)
Number of poles: 1, 2, 3, 4
Standard: IEC60898
We also can manufactur MCB against customer's requirement.

Moulded Case Circuit Breaker

Moulded Case Circuit Breaker
Specification: Type: Moulded Case ; Poles Number: 3 ; Frame current: 100A ; Rated current: 40A,50A,63A,80A,100A ; Frequency: 50Hz ; Rated voltage: 380V ; Break capacity: 6kA ; Poles No.: 3 ; Type: Moulded Case ; DZL25 Series Circuit Breaker: Anti-jamming abil. ; Usage: Over-loading,over-voltage protecting ; Moulded Case Circuit Breaker: Small volume,with. ;
1.Moulded Case Circuit Breaker
2.Rated voltage:380V
3.Rated current:40A,50A,63A,80A,100A
4.Type:Moulded Case
5.CE compliant1.CCC,CE appliant;
6.Circuit breaker confirm to GB689-95,GB14048.2-2001,IEC755 standard.
4.Circuit breaker takes protecting effect when motors non-frequent start, breaking off working and protecting overload, short circuit and lacking voltage.
5.Basic parameter:

2p Moulded Case Circuit Breaker

TYM1-250 2P Moulded Case circuit breaker
Specification: Type: Moulded Case ; Poles Number: 2 ; Environment temperature: -5~40 ; Pollution rate: 3 degree ; Protection level: IP20 ; Rated current: 250A ;
TYM1-250 2P Moulded Case circuit breaker
The TYM1 is suitable for power distribution, overlaod for line or power devices, undervoltage and short circuit protection, overload and short circuit protection for motors under 800A. It also can be used as the infrequent starting of motors.
The protection range is from 10A-800A. Low breaking and high breaking are provided for all kinds of applications. Thermal-electromeganetic tripping for overlaod and short circuit protection. Electromeganetic tripping only for motors is also available.
More inner and outer accessories are further provided for remote tripping and undervoltage protection. Multiple installation methods for the convenience of connection, maintenance and replacement of users.

Pl10 Mcb

PL10 MCB
Specification: Type: Mini ; Poles Number: 1 ;
PL10 MCB
Applications:
Mini Circuit Breaker L7 belongs to the advanced level of the 90th in the world instead of the older generation of L7. It has protective function of overload, and is used
in lighting distribution system in industry, commerce, dwelling and protect fractional
electric motors. They also have many merits of high protective grade (up to IP20), high breaking capacity, reliable sensitive action, convenient multi-pole assembling and long life. They are mainly adapted to the circuit of AC 50Hz, 230V in single-pole, 400V in double/three/four-pole for protecting overload and short circuit. Meanwhile, they are also used in turning on or off the electric apparatus and lighting circuit under the normal conditions.

Features:
1) Conforms to standards of electrical EN60898 (IEC898), GB10963-99
2) Rated current: 230V/400V, 50/60Hz
3) Rated breaking capacity: 10kA IEC898 (0.5 - 63A), 15kA IEC947-2 (0.5 - 63A)
4) Short circuit breaking capacity of DC: max. 48V (KL7, 10kA) single-pole,
max. 250V (KL7-DC, 6kA) single-pole
5) Performance: C, D characteristic curve
6) Max. fuse that can be connected to: 100AgL (>10kA)
7) Selective grade: 3
8) Working ambient temperature: -5 - 40°C
9) Enclosed protective class: P40 (under mounting)
10) Life:
a) Electrical: not less of 8,000 times switching operation
b) Mechanical: not less of 20,000 times switching operation

Mcb

MCB
Specification: Type: Mini ; Poles Number: 1 ; quality: good ; price: competitive ;
1.standard:CE, ROSH approval certificate, 10KA MCB
2.rate frequency:50/60hz
3.rated voltage:230/400vac
4.rated short-circuit making capacity:10000a

CONSTRUCTION AND FEATURE
*Capable of switch electric circuit with load
*Capable of quickly releasing stored energy operation
*Adaptable to padlock device
*Contact position indication
*High short-circuit current withstand capacity
*Highlighted of high making and breaking capacity
Used as main switch for household and similar installation
TECHNICAL DATA
*Pole No: 1, 2, 3, 4
*Rated current(A): 1, 2, 3, 4, 6, 10, 20, 25, 32, 40, 50, 63
*Rated frequency: 50/60hz
*Rated voltage: 230/400V AC
*Rated withstand current: 1000A within 1 sec
*Electro-mechanical endurance: 10000 cycles
*Rated short-circuit making capacity: 10000A
*Connection capacity: Rigid conductor 25mm2
*Connection terminal:
-Screw terminal
-Pillar terminal with clamp
*Installation:
-Panel mounting

Indoor Vacuum Circuit Breaker

Indoor Vacuum Circuit Breaker
Specification:
Main characteristic
1,The circuit breaker for the console-model handcart structure, uses the explosion chamber in on, the organization in the under integral-type layout, is advantageous for the debugging.
2, Use the air and the organic material compound insulation structure, the design compact, the weight is light.
3, Match American Cuter-Hammer Corporation the vacuum explosion chamber and the domestically produced vacuum explosion chamber, its explosion chamber uses the vertical magnetic field extinguishing of arc, lowly dams the current.
4, The simple spring operating mechanism, 10,000 operations exempts the maintenance.
5th, the guide screw advances the organization, reduces effort, steadily, the self-locking is good

Ip Mini Circuit Breaker

IP Mini Circuit Breaker
Specification: Type: Mini ; Poles Number: 1 ; Certification: CE,IS9001-2003,CCC ; phase: 1 ; IP: 40 ;
Features:
1) Module design and standard guide installation
2) Current transformer uses beryllium membrane alloy material and has high reliability
3) Adopts Geman import double matel plate, stable and reliability function.
4) Used of copper-iron composite arc-starting plate,low temperature and quick heat dissipation.
5) Cantact is made of siliver alloy ,so contact reliabilty and long working time.
6) Enlarge binding screw cap, it is steady and convenient to install.
7) High disjunction ability and strong current limited.
8) Rail-style design,installatin and maintenance more easily.

expediently

Outer packing:120pcs/ctn
Remarks:
our factory also supply JMM310C,JMM316C,JMM320C,JMM325C,JMM332C,JMM340C,JMM350C,JMM363C.

our company main products:

our workshop:

Non-polarised 4 Poles 1000v Dc Solar Circuit Breaker

Non-polarised 4 Poles 1000V DC Solar Circuit breaker
Specification: Type: Mini ; Poles Number: 4 ; current: 1000V DC ; No. of poles: 4ples ; certification: Semko ; application: PV ;
Solar 1000V DC circuit breaker:
True DC breaker not changed from AC.

Approval	Semko
Rated Voltage	DC250V/1000V
Frequency	50/60HZ
Limit short circuit	DC250V 15KA
Instantaneous Trip Type	C type
Working Temperautre	-5- +40 Degree
Tripping Characteristic c type Temperature	30-35: 7In-15In
Standard	60947-2

Car Circuit Breaker

Car Circuit Breaker
Specification: Type: FUSE BOX ; Poles Number: 2 ; Certification: ISO9001, TS16949/ISO14001: 2004 ;
Car Circuit Breaker
Features:1) Consist of fuse box, fuse plate and storage battery connection2) Used for car storage batteries3) Cut circuit automatically and protect car when problems exist
We have strong and skillful engineer team and developing facility, tracking from the beginning of designing to aftersale service. Our products range quite a wide scale. Any request, pls do not hesitate to let me know.

Mini Circuit Breaker

Mini Circuit Breaker
Specification: Type: Mini ; Poles Number: 3 ; Certificate: CE,ISO9001 ;

←miniature circuit breaker,circuit break,breaker→ CE certificated high quality mini circuit breaker,miniature circuit breaker,circuit break,breaker, (MCB) Protection and control of circuit against overload and short circuit,In building installation-such as houses,offices,commercial complex,motor system(D curve) and industrial installation-for switching ,control,protection and regulation of electrical circuits. Also in switchgear panels,railway and marine application.

Solar Non Polarise Dc Breaker

Solar Non Polarise DC Breaker
Specification: Type: Mini ; DC: DC550V,DC800V,DC1000V ; Quality: High quality ; Web: www.clipso-china.com ; Rated Breaking Capacity: 6KA ; Certification: CE,SAA,CB ; Confrom to standard of electrical: IEC 60947-2 ; Shell Color: White ; Poles Number: 2P,3P,4P ; Name: Solar Non Polarise DC Breaker ;
CLDCBO2, CLDCBO3, CLDCBO4 non polarised DC Miniature Circuit Breaker.
CLDCBO2, CLDCBO3, CLDCBO4 Mini circuit breakers is used extensively in the commercial, industrial for overload and short-circuit protection as well as for unfrequent switching under normal case

We supply qualified non polarised dc breakers
2pole , 3pole , 4 pole all available
with the reasonable prices.

Overload and short-circuit protection sutiable for DC circuit,especially at the fields of communication,electric and electric vehicle and so on.

Good Quality Kuoyuh 98 Circuit Breaker

Good Quality KUOYUH 98 Circuit Breaker
Specification: Type: Mini ; Circuit Breaker: Agent ;
Circuit Breaker

Using scope:
Suitable for various kinds of medium and small-scale electrical machineries , built-up socket of electric apparatuses.

Technical Parameters:Rated current: : 3Amp — 50Amp .Rated voltage: 125/250V AC,50VDC 50-60Hz .Insulation Press resistance Test : 1,500Vac /minute.Resetting over charge: 10 times current.Resetting time : In 60 second.Insulation resistance : More than 500Vdc × 100MΩ .Contact life test: 125Vac × 150 % current test more than 500 times.Certification: UL,VDE,3C,TUV,SGS

Hi-amp Circuit Breaker

Hi-amp circuit breaker
Specification: Type: NO ; Poles Number: NO ; CIRCUIT BREAKER: CIRCUIT BREAKER ;
Circuit Breaker
for HI-current operation accept two Ring Terminals

HI-AMP Circuit Breakers
Auto, Manual, & Switch able Reset
Available: 80A, 100A, 140A, 200A,250A,300A
Nickel or Gold plated

Applications:
Used in auxiliary accessory circuits where you need hi-amp current & protection too. Cars,Trucks, Buses, RV's and Marine applications.

Distribution Box

distribution box
Specification: Type: Mini ; Grey: GREY ;

Product Description
1, Distribution box ( breaker box ).
2, Standard: CE, IEC, ISO-9001-2000, CCC.
3, They are widely used in hotel, building site, corporations, office buildings, high-grade uptowns, and so on.
4, It is series of distribution box are standard enclosures suitable for consumer, it is able to protect your home appliance, lighting and circuit.
5, Made out of high quality cold-rolled steel sheet of up to1.5mm thickness.
6, Rich size for selecting.
7, Beautiful color to match for building.
8, Professical manufacture of production, and strongly service team.
9, Allways, best price for you.

Specification:
1, The modular enclosure is suitable for-
2, Service voltage: 415/240/120 vac
3, Rated insulation voltage: 600 vac
4, Frequency: 50/60 Hz
5, Ambient temperature: 50 c
6, Indoor IP 41 applications

Miniature Circuit Breaker

Miniature circuit breaker
Specification:
Control and protection of circuits against short-circuit and overload currents
Protection of persons against indirect contact

Head office :No.66, Meishu E. 5th Rd., Gushan Dist., Kaohsiung 804, Taiwan
TEL:886-7-5521311
FAX:886-7-5553667
URL:http://.tw/en/

Miniature Circuit Breaker Mcb

Miniature Circuit Breaker MCB
Specification:
Miniature Circuit Breaker (Mini Circuit Breaker) mcb

We can supply C45N(DZ47) MCB, DZ47LE, C60N MCB, C65N MCB, NT-50 Safety Breaker, S101 Screw MCB, E4CB MCB, 200B 200BZ MCB, L7 MCB, NC-100H MCB, MY, MT, MU MCB, SX MCB, BH MCB, Hydraulic Magnetic Miniature Circuit Breaker

We specialise in circuit breakers for world market. Professonal OEM manufacturer.

Surge Arresters

Surge arresters
Specification: Type: High Voltage ; Poles Number: 1 ;
Zinc Oxide Polymer Lightning Arrester(Surge Arrester)
ISO9001:2000
Standard applied: IEC60099-4.
High energy input capacity.
Rated voltage 13KV,18KV,24KV

Service condition:
1) Ambient temperature: -50C~ +50C
2) Altitude: Up to 2000m
3) Maximum wind velocity: 45m/s
4) Earthquake intensity: 7 degree

We also can produce by users' special requirements.

NS100SX80A
Specification: Type: circuit breaker ;
NS100SX80A
Schneider circuit breaker
Terms:
1.Payment Term: T/T in advance, paypal, western union or escrow or others.
2.Delivery:by FEDEX, DHL,TNT,UPS,EMS or others. Freight paid by customer, goods can be delivered after payment.
3.Warranty of any parts from Yaspro Electronics Shanghai is 60 days

company introduction:
.cn

Yaspro Electronics (Shanghai) is a customer-oriented independent stocking distributor.
Our Main products:
Darlington, IGBT, IPM, PIM, Thyristor Diode Rectifier Bridge, SCR, GTO power modules, Mosfet, Connectors, Resistors, Relays, sensors, photoelectric switches, inverters, fuse, PLC, Circuit Breakers, contactor, Encoders, Counter, On Button and Indicator, Switching Power Supply, Battery.

Our main brands:
Mitsubishi, Fuji, Sanken, SanRex, Sanyo, OMRON, PRX, Eupec, Infineon, Semikron, Ixys, Westcode, Dynex, Schneider, ABB, Tyco, IR, and so on.

Earth Leakage Circuit Breaker

DZ15LE-40/4901 Earth Leakage Circuit Breaker
Specification: Type: Earth Leakage ; Poles Number: 2,3,4 ; Rated Voltage: 220V ; Rated Current: 40A ; Frequency: 50HZ ; Certification: IEC60947-2,GB14048.2 ; Color: Black ;
Main Technical parameters

Model	Shell Frame level Rated Current lmn(A)	Rated Voltage(V)	Rated Frequency(HZ)	Pole	Rated Current ln(A)	Rated Limited Breaking Capacity Lcu(kA)	Rated Earth Leakage Current With Operation(mA)	Rated Earth Leakage Current Without Operation(mA)
DZ15LE-40	40	220-380	50	2,3,4	6,10, 16,20,25,32,40	3	30	15
							50	25
							75	40
							100	50
DZ15LE-100	100	220-380	50	2,3,4	10,16,20, 25,32,40,50,63,80, 100	5	30	15
							50	25
							75	40
							100	50

Operation Condition

Circuit Breaker,

circuit breaker,
Specification: Type: Mini ; Poles Number: 1 ; ISO9001: CE ;
The product,with long life,is mainly used in AC 50HZ/60HZ single pole 240V or two,three,four poles up to 45V circuit for overload and short circuit protection.as well as for unfrequently switching on&off electric equipment and lighting circuit in normal case.the product comply with IEC60898&GB10963-1999.
SPEC:
setting temperature of portective characteristics at 400C
rated voltage:240V/415V
rated current:1,3,6,10,16,20,25,32,40,50,63A
electrical life:no less than 6000 operations
mechanical life:(O-C) on less than 20000

Circuit Breaker

MHQL circuit breaker
Specification: Type: Mini ; Poles Number: Other ; plug in type: plug in type ;
MHQL mini circuit breaker applies to industry ,commercial ,lighting and electrical machine distribution system with AC415V,50/60Hz ,rated working current to 100A protect against overload and short circuit ,The item is installed into plug-in type mounting base.
Technical Data

Type	MHQL
Number of poles	1P, 2P, 3P
Rated Current(A)	6, 10,16, 20, 25, 30, 40, 50, 63, 70, 80, 90,100A
Breaking Capacity(A)	3000
Rated Voltage(V)	110/ 220V (1P); 240/ 415V (2P); 415V (3P)
Electrical Life	≥6000
Mechanical Life	≥20000

Drive Mechanism For 12kv Vacuum Circuit Breaker

drive mechanism for 12kv vacuum circuit breaker
Specification: Type: Vacuum ; Poles Number: 3 ;
In factor, it has two types, including manual type and motor driven type.

Technology Parameter

Number

Item

Unit

Date

Rated voltage

Rated current

630-1250

Rated short-time breaking current

20-31.5

Output rotate angle

Degree

3540

Output distance

Closing work

70120

Size

Manual type

560*210*494

motor-driven type

Weight

Manual type

motor-driven type

Circuit Breaker 88

Circuit Breaker 88
Specification: Type: High Voltage ; Poles Number: 1 ; CIRCUIT BREAKER: 88 Series ;
CIRCUIT BREAKER/SAFETY SWITCH/BREAKER
Rating: 3 ~ 25 A 125/250 V AC
Input Power: 125/250 Vac 50V dc 50-60Hz
Interrupting Capacity : 1,000Amp x 125 V ac 200Amp x 250V ac
Voltage Drop : Less than 0.25V
Dielectric strength: AC 1500 V 1 minute
Insulation resistance: >500 Megaohms
Reset Time: Within 60 seconds
Temperature Rise at Terminal Block: Less than 65oC at 100% of rated current applied
continuously at 25oC
Contact Endurance: 125Vac X 150% of rated current >500 Cycles

Calibration ( at 25oC)
100% of rated current: Hold, No-Trip
135% of rated current: Trip in 1 Hour
200% of rated current: 5-25 seconds Trip
300% of rated current: 1.6-4.8 seconds Trip

Approvals : RoHS, UL, CUL, CSA, VDE

Shielded Enclosure Custom-made Aluminum Casting

Shielded enclosure custom-made Aluminum Casting
Specification: Type: High Voltage ; Poles Number: Other ; Voltage grade: 126KV ;
High voltage circuit breaker (or says the high voltage switch) it can not only cut or closed the idle current and high voltage circuit, load current and when a fault occurs through the relay protection device role, cut over load current and short-circuit current, it has quite perfect arcing structure and sufficient flow ability, can be divided into: oil circuit breaker (much oil circuit breakers, less oil circuit breaker), six fluoride sulfur circuit breaker (SF6 circuit breaker), vacuum circuit breaker, compressed air circuit breaker, etc.

Tel: +86-510-81003739
Fax:+86-510-83760025
Address: GuLi village,YanQiao town,WuXi city,JiangSu,China
P.O.:214000
Mr Zhang 13806174353 (chinese language)

Hs Mini Circuit Breaker

HS mini circuit breaker
Specification: Type: Mini ; Poles Number: 1 ; CE approval: white ;
APPLICATIONS
The products of HS belong to the advanced level of the nineties in the international instead of the older generation of HS. They have protective function as shortage as overload, and are used in lighting distribution system in industry, commerce and dwelling, and protecting fractional electric motors, and they also have many merits of high protective grade(up to IP20), high breaking capacity, reliable sensitive action, convenient, multiple assembling, long life etc. They are mainly adapted to the circuit of AC 50Hz, 230V in single pole, 400V in double, three, four poles for protecting overload and short circuit. Meanwhile, they are also used in turning on or off the electric apparatus and lighting circuit under the normal condition.

Pvc Cable Wires/copper Wire

PVC cable wires/copper wire
Specification: Type: CCA ; Poles Number: 2core ;

home electrical wire

We can supply a range of solid and stranded cables which are used for fixed wiring, house / domestic wiring / project & industrial plants and others. Further, these are also used for fixed wiring, house/ domestic wiring/ Project & Industrial Plants and others.

Specifications:
Standards: 227IEC01/02, equivalent to VDE 0281 BS6004
Conductor: Single Core solid & stranded bright annealed copper conductor --class 2 IEC228
Insulation: PVC
Voltage rating: 450/750V for above 1.5mm2, 300/500V for below 1mm²
Temperature range: 0 ºC to 70ºC
Main colors: black-blue-red-green/yellow-brown-grey-orange-violet-white-dark blue
Minimum bending radius:
Up to 10mm² , 3 x overall dia;10mm² to 25mm², 4 x overall dia;Above 25mm², 5 x overall dia
Application: suitable for use in conduit and for fixed, protected installation
Remark: the cable can be of Low smoke free halogen, flame retardance and other enhanced features

Circuit Breaker Schneider

Circuit Breaker Schneider C65N4PC25A
Specification: Condition: Original/stock ; Type: Circuit Breaker ;
Circuit Breaker Schneider C65N4PC25A
Type:breakers
Place of origin: france
Brand name: schneider
Lead-time: Stock
Packaging Detail: Cartons
Delivery Detail: After payment
TNT/UPS/DHL /Fedex Shipping methods
Application
1.Inverters for AC motors
2.Power supply units for DCmotors
3.DC power supply uints for battery chargers
4.General purpose DC power supply uints.
Related Products
C65N2PD10A
C65N2PD16A
C65N2PD20A
C65N2PD25A
C65N2PD32A
C65N2PD40A
C65N2PD50A
C65N2PD63A
C65N3PC1A
C65N3PC2A
C65N3PC4A
C65N3PC6A
C65N3PC10A
C65N3PC16A
C65N3PC20A
C65N3PC25A
C65N3PC32A
C65N3PC40A
C65N3PC50A
C65N3PC63A
C65N2PD1A
C65N3PD2A
C65N3PD4A
C65N3PD6A
C65N3PD10A
C65N3PD16A
C65N3PD20A
C65N3PD25A
C65N3PD32A
C65N3PD40A
C65N3PD50A
C65N3PD63A

Moulded Case Circuit Breaker 6a 3p

JM5-5SB Moulded Case Circuit Breaker 6A 3P
Specification: Type: Moulded Case ; Poles Number: 3 ; Color: black ; Rated current: 6a ;
JM5-5SB Series Mould Case Circuit Breaker

1. Modle: JM5-5SB
2. Name of article: Mould Case Circuit Breaker
3. Rated voltage: 120V to 415V
4. Frequency: 50Hz/60Hz
5. Rated current(A): 6A
6. Poles: 3P

Application Range:
1. Applied for the power distribution network of AC50Hz/60Hz
2. Rated working Voltage up to AC 415V or DC125V
3. Rated Current up to 6A.
4. Protect power equipment against overload, short current and undervoltage.
5. Used in Electrical Distribution and Protection Equipment.
6. Can be used in electric motors, change the circuit and start motor infrequently.
7. Are applied in both land and marine. They withstand humidification, smoke, mold and normal
shake of vessels. When they used in marine, temperature should be -25°C~+45°C.

Comply with the demands of the standards: IEC92 “Marine Electric Apparatus” and GB/T3783 “Marine Low-voltage Equipment Requirement”

Circuit Breaker

Circuit Breaker
Specification: Type: Mini ; Poles Number: 1-4 Poles ; Desc: : Mini Circuit Breaker ; Pole: : 1-4 ; Type: : Mini ; Standard: : GB10963, IEC60898 BS3871. ; Brand: : HF-SHAW ;
DZ47-63 series circuit breaker is used in lighting distribution system or motor distribution system for protecting overload and short-circuit in the system. The product is novel in structure, light in weight,reliable and excellent in performance. It has high breaking capacity, can trip quickly and it's installation uses with guide, its case and body are adopted with high fire-resistant and shockproof plastics. The product, with long life, is mainly used in AC 50Hz/60Hz single-pole 240V or two, three, four-pole 415V circuit for overload and short-circuit protection as well as for unfrequent on-and-off switching electric equipment and lighting circuit in normal case. This product conform to GB10963, IEC60898 BS3871.

1/2" Snap Disc Thermostat-301

1/2" snap disc ThermostatKSD-301
Specification: Type: High Voltage ; Usage: Household ; Theory: Temperature Controller ;
1/2" snap disc HERMOSTAT(THERMOSTAT PROTECTOR)KSD-301 series
Technical parameters: 1,electrical parameters: 10/250V (resistance loaded),2,temperature range: 45 ~ 150 ° c (any),disconnect temperature precision: ± (2.5 ~ 5%) degrees Celsius3,moveable bracket4,Insert terminal 187 # (0 ~ 90% % d bending is optional, thickness, 0.8 mm 0.5 optional),5,service life: 10/250V 6000 cycle,6,electrical strength: AC1500V 1min diachronic flashover, no, no breakdown,7,contact resistance than 50m Ω; :8,insulation resistance: > Ω 100M,9,forms, closed type: rising temperatures, contacts disconnected, manual reset, Often open type: rising temperatures, contacts through manual reset,10,protection grade: IP00,11,earthing ways: by metal shell and device thermostat grounded (earthed) metal parts

Applications: Various motors
Pumps, air compressors and cleaners
Fluorescent ballasts and lightings
Heating pad and electrical blankets
Electrical tools, chargers and transformers
Home and heating appliances
UL,VDE

Thermal Circuit Breaker

Thermal Circuit Breaker
Specification: Type: Moulded Case ; Poles Number: 2 ;
Thermal Circuit Breaker

Circuit Breaker
1) ratings from 0.5A to 70A rating AC125V & 250V
2)Safety Approvals: UL CUL VDE CCC

Features Designed for push-button illumination indicated that the circuit breaker under overload condition Snaps cutout as many common circuit breakers 0.5A~70A Rating AC 125V & 250V

Switch Type: Pushbutton
Voltage Compatibility: DC

Typical Applications : Motors,Transformers,Household and office machines, Instrumentation, Surge protectors,Power centers

International Patent : Taiwan , China , USA
Safety Approvals : UL CUL VDE CCC
Dielectric Strength 1500VAC at 50Hz/60 Hz for 60 seconds
Insulation Resistance 100 MΩ(at 500VDC) voltages 125/250VAC ,50/60 Hz Endurance 10000 operations Ambient operation -10 to +60 degrees Celsius