 |
|
FM Transmitter
1) FM stereo transmitter/receiver. 2) Intercom. 3) There are 4 work channels for choosing, corresponding 4 LEDs indication. 4) "HI" and "LO" position select high and low volume. 5) Dual color LED indicate the working status (the RED is for receiving, and the GREEN is for transmitting). 6) Single key operation: short press POWER button to change the channel, it is toggled at 107.1, 107.3, 107.5, 107.7MHz four channels, corresponding LED indication; long press POWER button toggles the system turn off/on Product Group: FM Transmitter |
|
FM Transmitter for iPod Nano
1) High fidelity stereo: this device can modulate the audio frequency signal. of IPOD NONA to FM signal; With the stereo tune you can enjoy listening high quality music anywhere. 2) Digital PLL: with digital PLL, wave signal transmission and reception will not be affected even in places subject to extreme change in temperature; in addition, using the digital tune can avoid the fussy frequency modulation. 3) Powered by IPOD NONA's power source. 4) Full frequency range design can effectively avoid interruption |
|
Fm Transmitter 2 Frequency With Usb Am
1) It is able to change the audio signal into frequency modulation signal and transmit wirelessly to the sound box of the car and play. No need to change any original equipments and is convenient and economic. 2) Fashionable, smart, stereo voice and convenient operation,2 frequency is FM 102.6, 107.9 MHz and is changeable.. 3) Multi-function make you have your own FM channel; unnecessary to change the MP3, CD of your car. 4) The products adopt the latest 3D technology and make the tone same as laser and CD and television. 5) It has been adopted phaselock loop technology, which ensures stable frequency radiation while functioning at a distance of up to 30M without dead areas so that you can still enjoy HI-FI music at home of in our car. |
|
Channel LCD FM Transmitter
How to use: 1) Install the batteries (2 AAA batteries) or connect to the car's power source. 2) Plug the FM transmitter into audio device's output port. 3) Adjust the volume and frequency of the FM radio (avoid the transmission points of broadcasting stations). 4) Press the power button of FM transmitter, tune the transmission frequency according to the reception frequency of FM radio (if the FM signal is interrupted, please set the frequency of FM transmitter and FM tuner to the other frequency). 5) Press "O" button for a few seconds until M0, M1, M2 to M9 is shown on the LCD,so that you can save the transmission frequency. 6) The FM transmitter will automatically shut down after 2 minutes if no audio frequency is input. Features: 1) High fidelity, stereo: this device can modulate the audio frequency signal of CD, MD,MP3, MP4, PDA, notebook, and PC to FM signal (87.0~108.5MHz). With the stereo tune you can enjoy listening to high quality music anywhere. 2) Digital PLL: with Digital PLL, wave signal transmission and reception will not be affected even in places subject to extreme change in temperature. In addition, using the digital tune can avoid fussy frequency modulation. 3) Powered by batteries or the car's power source. 4) Full frequency range design can effectively avoid interruption |
|
FM Music Transmitter for Mobile Phone
FM transmitter to mobile phone to broadcast music to a radio at a party, in the car and control the music from up to 10 meters away. Supports Nokia and Sony Ericsson phones. Specifications: Frequency Range: 88.1~107.9MHz, adjusted by mobile phone. Power Supply: Power by mobile phone; Transfer mode: RF FM. Output Power: 250uV/m; Output Range: 10M; Size: 45 x 35 x 11mm; Weight: 10g; Available colors: Silver, white, Black; Included Accessories; User manual |
|
All-Solid-State FM Stereo Broadcasting Transmitter
The RF power distribution and power synthesizer use the microstrip line technology, the structure compact design are reasonable, without any adjustment, also the bandwidth output, easy to defend, the reliability is high. The power amplifier designs redundant quantity, high safety coefficient. Each merit puts realizes modulation, maintains simply, the merit puts tube to use import 300W double MOSFET transistor, thus guaranteed the overall reliability. The power part install the advanced power source anti-radar, when appears the thunder stroke, anti-radar could rapid be struck by lightning in the nanosecond level time leaking the voltage into the earth. The control section uses digitization logic circuit, reservation remote control, telemeter connection, s advantageous for the user to carry on the remote control and automated transformation. Other may request according to the user to dispose SIEMENS liquid crystal touching screen man-machine contact surface PLC intelligence control system. Uses the overseas famous company microcomputer control type actuator, has the friendly man-machine contact surface, technology refers to the elevation, facilitate adjustment, extension conveniently strong, additional channel connection is superior, two-circuit SCA, RDS connection and so on. This type already through the level scientific and technical payoffs appraisal, and has The State Administration of Radio Film and Television bureau product to enter the model which the net permit, the production certificate and National Wireless Communication Committee issues after due investigation to approve the card. |
|
FM Transmitter with LCD for iPod
1) FM wireless modulating and transmitting iPod output audio signal for car FM radio or portable FM radio ; 2) Pressing button to adjust the transmitting frequency digitally from 87.5MHz to 108MHz with the frequency interval of 100KHz ; 3) Setting up and saving nine channels at the same time. Each channel's frequency can be set up, changed and saved independently ; 4) LCD indicating frequency and channel ; 5) Power provided by iPod directly. Low power consumption (working current is less than 18mA) ; 6) High-fidelity, original high quality tone ; 7) Good interference resisting ; 8) Effective receiving distance: >6 meters ; 9) For users' convenience, transmitter attached with one earphone jack for users enjoying music with earphone |
|
FM Transmitter
1) Install the battery into the FM transmitter and turn on the power ; 2) Insert the audio input jack to the audio player's output socket ; 3) Turn on the audio player and press "scan" button to choose the correct channel. The corresponding channel indicator light will be on for your choice ; 4) Turn on the FM radio, turn to corresponding channel then you could enjoy music. Specifications: 1) Frequency channel: 88.1 MHz, 88.3 MHz and 88.5 MHz ; 2) Frequency stability: 10 ppm ; 3) Modulation mode: 75KHz wide band ; 4) Syntonic Preference: no more than 60dB ; 5) Transmit distance: more than 5 metre ; 6) Signal to noise ratio: >45dB ; 7) Input Voltage: 3V Product Group: FM Transmitter |
|
FM Transmitter
1) High fidelity stereo effect: this device can modulate the audio frequency signal to FM signal (87.5 - 108.0MHz) ; 2) Full frequency range design can effectively avoid interruption ; 3) LCD display for easier control. Specifications: 1) Operating range: more than 10M ; 2) Operating current: 45mA ; 3) Transmission range: 87.5MHz - 108.0MHz (interval 0.1MHz) ; 4) Frequency response: 20 - 15000Hz ; 5) Stereo separation: 40dB ; 6) Transmission frequency deviation: less than 0.01M ; 7) Signal-to-noise ratio: more than 68dB |
|
Wireless FM Transmitter
1) For iPod, MP3, CD, cassette player, camera, game console, PC and laptop computer. 2) High-clarity, full-stereo sound. 3) Light, easy to carry. 4) Compact cable management |
|
FM Transmitter With 4 Frequency
We are a manufacturer of below products from china: USB Data Cable; Bluetooth Dongle and Handfree ; USB HUB ; Card Reader/Writer ; Computer Cable ; Mobile Phone Charger ; Mobile Phone Hands Free ; Memory Card(MMC/SD,CF,XD,MS,etc) ; MP3 , MP4 Player ; PC Camera |
|
MP3 Player Watch with Wireless FM Transmitter Function
MP3 Player Watch with Wireless FM Transmitter Function. MP3 player watch in 4 different capacities up to 2GB. Includes FM transmitter function so you can stream the audio wirelessly to your car radio or home stereo. Includes voice recording function and support for WMA. |
|
FM Transmitter for iPod Nano II
This FM transmitter is fashionable and multifunctional, approved with CE certificate which is the symbol of high quality. Let's enjoy the fun of music anywhere. Features: High fidelity, stereo ; With digital PLL, wave signal transmission and reception won't be affected even in the situation subject to extreme changes by temperature ; Full frequency range design effectively avoids interruption ; Powered by iPod directly ; Memory for latest used frequency ; With charging socket for iPod at the bottom. Specifications: Frequency response: 100Hz-15,000Hz ; Separation: >=30dB ; Operating current: 20+/-3mA ; Transmission range: 88.1MHz-107.9MHz (interval 0.1MHz) ; Color: black (1-1010201-0-02), silver (1-1010201-0-18), blue (1-1010201-0-08), green (1-1010201-0-10), white (1-1010201-0-01), pink (1-1010201-0-06) ; Dimensions: D35 x W40 x H5.6 (mm). |
|
Car FM Transmitter
1) Adopts 3-D sound coding technology, which maintains the hi-fi effects of MP3 players, MD players, CD players and TV 2) Developed from frequency phaselock loop technology, which ensures stable frequency radiation while functioning at a distance of up to 30Mt in dead areas 3) It can change the audio signals into frequency modulation signals and transmit it wirelessly to the sound box of the car and play without changing any original equipment 4) Convenient and economical. Product Group: Car FM Transmitter |