 |
|
FRP Cooling Towers
FRP Cooling Towers are manufactured with Glass reinforced plastic mostly in wind with standing bottle type and square type models. FRP Cooling tower intakes the air from bottom and discharge the waste heat at the top. Since the water is traveling from top and the air passes from bottom to top, the water droplet have more direct contact time with air. The wet cooling Towers are cooled with the help of evaporating some proportionate quantity of circulating water. The bottle type tower casing is filled with Honeycomb type PVC FILLS. The rotating water distributor sprinkler is fixed in the top of the inlet pipeline and the same distributes the hot water evenly over the Honeycomb Fill media. The sprinkler will be operated with self-propulsion system. The PVC Fills is corrugated with channels between each flutes to prevent the blockage and giving more and large surface area per unit volume. The cold air meets the cold water at the bottom of the infill providing maximum evaporation and heat transfer in the infill. FRP Cooling Towers are more compact, light in weight, least power consumption, long-lasting, Durable and lowest maintenance expenditure. Since Hot dip galvanized structural and stainless steel fasteners are used. Product Group: FRP Cooling Tower |
|
FRP Support Grid For Cooling Tower
FRP Support grid is for supporting the splash bar in cooling tower. The FRP support grid is made out of ISO Pthalic resin and E glass roving and designed to support the V Bar / triangular splash Bar along its length. The Grid is designed to ensure long life for the support in the hot atmosphere and ensure that splash bar is intact in their position for higher efficiency of the cooling tower. Product Group: FRP Cooling Tower |