 |
|
PE Powder Coating
Thermoplastic powder coating. Excellent flexibility, insulating property and resistant to chemcial and low temperature. Suitable for thick coating. Non-poisonous. Types Available: A, Standard type; B, weather resistant type; C, engineering type ; A: suitalbe for bike parts, toy, tools, etc. ; B: suitable for exterior structures, air conditioner casing, etc. ; C: suitable for road grid, exterior grille, chemical equipment, pipe, etc. ; Application condition: Pre-heat the part to be coated to 270-360 C, place in a fluidized bed for 4-8s, then baking at 180-190 C for 2-5 min. Stay to let coating film leveled. |
|
Metallic Powder Coating
1) Color: different colors available ; 2) Gloss range: 50 - 95% under 60° ; 3) Surface: a) Smooth and textured for gloss to semi-gloss ; b) Vermicular for semi-gloss to mat ; 4) Density: 1.3 - 1.8 ; 5) Storage: a) Stored in dry places in closed packages ; b) Temperature: below 25°C (80°F) ; 6) Shelf life: 12 months in closed bag at a temperature bellow 25°C (80°F) ; 7) Every 100kg powder coating tested in production ; 8) We are ready to develop new products to match customers' requirements ; 9) We are very skilled in produce silver series and gold series powder coating |
|
Epoxy Powder Coating
a) Made of epoxy resin, excellent mechanical property and resistance to chemical, water and corrosion, high flexibility and electro-insulating property, suitable for use as high-duty coating on metal surfaces, not recommended for general exterior coating ; b) Types available: glossy, semi-dull, plain, full dull and special-effect types ; c) Applications: automotive parts, home appliance, office facility, pipe, etc. Product Group: Epoxy Powder Coating |
|
Powder Coating in Nanometer
1) Advanced powdering technology imported from abroad ; 2) Dustproof character make it first-choice in expressway facility coating ; 3) The products with nanometer powder coating are exported to USA and European with giant quantity |
|
Epoxy Polyester Powder Coating
Our main powder coating type is epoxy-polyester hybrid. It has smooth gloss type and texture type, etc. We also can supply many special powder coating, such as hammered gold, hammered copper, hammered silver, and transparent powder, etc. Product Group: Epoxy Powder Coating |
|
Copper Hammer Tone Powder Coating
1) Hammer tone powder coating is art vein powder coating ; 2) It is very beautiful and fascinating ; 3) Has excellent decorative effect and stereoscopic sense ; 4) Hammer tone powder coating includes many colors: copper hammer tone, silver hammer tone, gold hammer tone, white hammer tone, black hammer tone, red hammer tone, green hammer tone ; 5) This type of powder coating provides coatings with nice toughness and durability ; 6) Has good covering capacity for rough surface of workpieces ; 7) Also has good resistance to abrasion, scratch and chemical corrosion ; 8) Suitable for surface coatings of castings, pressure castings, heavy-duty machineries, engineering structural parts, freezers of chemical plant, kitchen utensils, steel pipes, frames, mechanical and electrical equipment, hardware and tools, textile machinery, instruments and apparatus |
|
Inner Wall Powder Coating
1) Hard coating, water and wear resistant, scrubbing resistant ; 2) Middle grade quality ; 3) Non-toxic ; 4) Used for leveling course and base course. |
|
Epoxy Powder Coating
1) Thermosetting epoxy powder coating includes a series of products, such as standard curing, rapid curing and low-temperature curing with high glossy, semi gloss and matt ; 2) These products may provide coating with excellent adhesion, hardness, chemical resistant, physical and mechanical properties ; 3) Suitable for surface coatings of kitchen utensils, cases of instruments and apparatus, display racks, mechanical and electrical equipment, auto parts, copper and aluminum articles. Product Group: Epoxy Powder Coating |
|
Powder Coating
We are the manufacturer in China for the products of epoxy(EE), polyester(PP) & epoxy polyester(EP,E/P) powder coating , polyurethane powder and sublimation powder(or wood effect powder) with output 2000tn per annum. We offer a variety of coatings including maximum gloss, minimum gloss(semi gloss), non-gloss(matt gloss), sub-gloss ,smooth finish, hammer finish, sand finish and corrugated finish. Product Group: Powder Coating |
|
Electrostatic Powder Coating
Type: ZAC-ll Manual ; Input Voltage; AC220V/50Hz (110V/60Hz) ; Output Voltage:DC 0-100KV Adjustable ; Output current 0.15 m A ; Air Source pressure 0 . 5 MPa ; Max. Consumption (0.5 MPa)13.2 Nm3/h ; Dead weight of voltage multiplier gun 480 g ; Powder Container Volume: 60L ; Max. Storage :30 Kg ; Net Weight :32Kg. |
|
Electrostatic Powder Coating Equipments
1) rectifier: Source:220/240vac,50/60hz ; Power: <100w ; Output voltage:20~80kv ; Output current:30~100ua. 2) hopper: Air pressure of feeding powder:0.1~0.4mpa ; Air pressure of fluidizing powder:0.01~0.15mpa ; Fogging air pressure:0.05~0.1mpa ; Capacity:50~350g/min ; Volume:15kg. 3) manual gun: Discharge air pressure:0.05~0.3mpa ; Discharge capacity:50~300g/min ; Spraying area: Dia.300mm ; Encirclement effect: Dia.100mm. |
|
Thermosetting High Antisepsis Powder Coating
The thermosetting high antisepsis powder coating is a kind of modified epoxy antisepsis powder coating, which has the properties of good anti-acid,anti-alkli,anti-solvent,heat resistance, wet and cold resistance, It is used for pipeline carrying oil, gas, and water. The products we produced is advanced than that of other suppliers not only in domestic but also in the foreign countries. Specifications: PE three layer (the inner layer is antisepsis powder), Single antisepsis, Double antisepsis Three antisepsis(the outside one is antisepsis powder with good durability), usually used for pipeline in open air, steel contraction shelf. Properties: Specific gravity:1.3-1.5g/cm3 Non-moisture content: >=99.4% ; Magnetism content:=<0.002% ; Particle size: 250um=<0.2% 150um;=<3% ; Curing time: It depends on the different type. Application Flow chart: workpiece→(medium channel) pre- heating→ sandblast→ catch dust→ heating(medium channel)→ electrostatic spray→ curing→ cooling → inspect→ finished products. Remark: The inside of pipeline shall be used tribo-gun, pump method and hot spraying method. The outside of pipeline usually adopted electrostatic spraying method, and for special workpiece usually adopted pipelining and electrostatic spraying method. Before spraying, the workpiece needs pre-heating. |
|
Powder Coating Equipment
The powder coating techniques is mature and widely applied in various industries. But technical innovation never ends. With tens of years of experiences of equipment manufacturing and application, SanLe has developed the energy-saving heating systems, unique multi-track one oven curing systems, high-efficiency powder recycle systems, and simple and practical pretreatment systems which makes SanLe to the advanced position of coating industry. Photo shows the equipment consisting of: 1) XT300.50 suspended conveyer. 2) Spray pre-treatment facility. 3) Combination oven of drying and curingt. 4) Powder coating booth and powder recycling facility. 5) Spray gun and lifter: 2 set with 12 guns each |
|
Powder Coating in Nanometer
1) Advanced powdering technology imported from abroad. 2) Dustproof character make it first-choice in expressway facility coating 3) The products with nanometer powder coating are exported to USA and European |
|
Pure Epoxy Powder Coating
1) Application: coating and decoration of metal (steel or aluminum) items for indoor items such as for indoor items such as electrical appliances, car spare parts, metal furniture, hospital equipment, camping accessories, HI-FI equipment and shelving. 2) Curing condition: 180°C/20min, 190°C/15min, 200°C/10min. 3) Impact strength: ASTM D2794 ≥50kg.cm. 4) Adhesion (cross-cut): ASTM D3359 ≤Gt0. 5) Pencil hardness: ASTM D3363 2H-3H. 6) Flexibility: ASTM D522 ≤1/8". 7) Neutral salt fog test: ASTM B117 ≥500h. 8) Humidity resistance: GB/T1740 >1,000H. 9) Erichsen: ISO 1520 >6mm. 10) Shelf life: 12 months. 11) Storage: stored in dry and ventilative places below 30°C |