 |
|
Solar Lighting Systems And Solar Water Heater
We are interested in selling domestic solar, solar water heaters, solar garden lights, and all solar products from china. |
|
Stainless Steel Solar Heater
1) Made from food grade stainless steel, using heat-pipe vacuum tubing ; 2) Heating equipment: Φ47 x 1500mm, Φ58 x 1800mm ; 3) Outer tank: imported color-coated steel plate ; 4) Inner tank: imported 304 food grade stainless steel ; 5) Insulation: polyurethane foaming of 50mm or 60mm thickness ; 6) Echo tilt: 38o, 45o, 50o ; 7) System pressurized: runs without pressure ; 8) Different types are available to suit the environment in which they are fitted Product Group: Solar Heater |
|
Solar Heater
1) For 5-7 persons ; 2) Heating elements: dia. 58 x 1800mm vacuum heat-collecting tubes ; 3) Pressure: 0.6Mpa ; 4) Temperature adjustment: 30-75oC ; 5) Solar-energy water heater ; 6) Size: 1.5m x 16 ; 1.5m x 18 ; 1.5m x 20 ; 1.5m x 22 ; 1.5m x 25 ; 7) Collector tubes available Product Group: Solar Heater |
|
Solar Water Heater
1) Vacuum collect heat pipe: high boron silicon glass, magnetism control spatter aluminum absorb 58 x 1,800mm. 2) Water tank: made by imported SUS304 2B stainless steel board. 3) Crust material: plating aluminum zinc board/color armor plate/stainless steel board. 4) Heat preservation floor and thickness: polyester whole sparkle thickness (40 ~ 60mm). 5) Bracket material: armor plate press model galvanization spray. 6) Firmware: stainless steel screw. 7) Airproof circle: macromolecular silicon rubber. 8) Heat temperature: 45 ~ 90°C. 9) Assistant electricity heat up: adopts stainless steel. 10) Microcomputer control test |
|
Solar Water Heater
1) Inner and outside water tank shell all are made of SUS3042B food grade stainless steel plates, welded by argon arc. Water is pure and drinkable. 2) Heat insulation of water tanks adopts polyurethane foam and the thickness is 55mm. 3) Silicon rings to connect and seal them. 4) The tubes and supports are adjustable. The power bearing is average and can assure the vacuum tubes to use for a long time. 5) Whole glass vacuum tubes adopt super hard borax and silica glass. 6) Absorption rate: =93%, thermal radiation rate: =6%. 7) It resists 25mm hail and the using life can last 15 years. 8) Temperature when exposed to sun without water: 250oC, 2.5 hours to boiling point if using single tube. 9) If you use electrical appliances to aid heating and to switch off the power supple before bathing. 10) Please test the water temperature before using, in order to avoid scalding Product Group: Solar Water Heater |
|
Heat-Pipe Solar Water Heater
1) The collector separates with the storage tank. The tank can be put anywhere in the house. 2) The collector can be put on the inclined roof or flat place. 3) Module design, arbitrary combination, harmonious with the building perfectly. 4) Intelligent control and automatic operation. 5) Anti-freezing: no water inside the tubes when it works. 6) The system controller has the anti-freezing function, the temperature circulation will operate when it reaches the fixed temperature. 7) Multifunction: bathing, washing, domestic heating Product Group: Solar Water Heater |
|
Solar Water Heater
1) All copper core with special coating (black painting, black chrome or blue selective coating) to ensure the good heat transfer and solar absorber. 2) Specially designed water tank makes the heat liquid and water separated. 3) Inner tank and heat transfer jacket are made with SUS304 stainless steel. 4) Supports are made of galvanized steel sheet. 5) Electric heater is used as heating backup. 6) Magnesium anti-scale prolongs the tank use life |
|
Solar Energy Water Heater
1) Water tank capacity: 9L, X tube. 2) Heat collector machine size: Φ58 x 1.8m. 3) New vacuum hot tube. 4) Inside water chest: imported BS SUS304-2B stainless steel (food class). 5) Outer water shell: imported zinc aluminum steel plate and USA DuPont carbon plank. 6) Heat insulation layer: 55mm ammonia ester integral foaming, superior heat preservation. 7) Grade A material: imported hot zinc steel plate. 8) Glint plank angle of elevation: 45°. 9) Water tank diameter: 460mm. 10) Falling water collection method Product Group: Solar Energy Water Heater |
|
Integrative Pressurized Solar Water Heater
A copper coiler with 20 - 50 meters length is installed in water storage tank as the heat exchanger. When water flows into the copper coiler, it absorbs the heat from the water in the tank, so it can bear much higher pressure, there will be a strong and more comfortable shower. And, without the tank directly transferring, the water is more clean and healthy. Product Group: Solar Water Heater |
|
Vacuum Tube Solar Water Heater
1) Hailstone resistant vacuum tube: a) Materials: hard borosilicate glass ; b) Dimensions: i) Diameter: 47mm or 58mm ; ii) Length: 1,500mm or 1,800mm ; 2) Tank material (exterior): stainless steel plate ; 3) Tank material (interior): SUS304 food grade stainless steel plate ; 4) Operating pressure: no pressure limited ; 5) Welded by high efficiency rolling welding machine with imported high quality stainless steel sheet ; 6) 55mm high density polyurethane integral foam ensures good heat-preserving effect ; 7) Made of corrosion-resistant stainless steel ; 8) Reflection sheet is assembled from many stainless steel sheets, is easy to install, and prevents snow from accumulating ; 9) Easy to ship and install ; 10) Bracket frame: stainless steel plate with thickness of 1.2mm Product Group: Solar Water Heater |
|
Solar Water Heater Control
1. Temperature (detective range): 0-99°C. 2. Temperature (detective precision): +/-2°C. 3. Water level: 5. 4. Power source: 220V AC. 5. Power consumption: <5W. 6. Electric heater belt and water pump power: <500W. 7. Outline size: 17 x 12.5 x 5cm. 8. Electric magnetic valve: 12V DC. 9. Pressurized and non-pressurized value alternative |
|
Solar Heater
1) High heat effectiveness: higher than normal all-glass tube by 10%. 2) Heat-pipe conduction: no water inside, thus it is successfully prevented form the defects of tube blockage and low power output caused by water fouling and deposits or dust and sand. 3) With small thermal capability, it can output power in 2 minutes. The highest temperature of cooling end can reach 250oC. The average heat efficiency can still be 50% even under -50oC. 4) High efficient selective absorptive coatings and vacuum heat insulation technology ensure the tube to get higher heat output in cloudy weather and in moist area, especially in winter. 5) Solar collecting plate is installed and sealed inside the tube of high quality borosilicate glass with 5 x10-2Pa of vacuum, so it cannot be corroded even in moist area. 6) Hot water system can endure 0.6Pa so that it can be connected to tap water tube. Product Group: Solar Heater |