 |
|
Solenoid Valves
1) Body material: stainless steel. 2) Operating type: normally closed/ normally open. 3) Mode of action: 2/2 way; pilot operated type. 4) Sealing material: NBR or Vion; NBR is standard. 5) Coil grade: Class B; IP 65. 6) Suitable temperature: below 130 degrees Product Group: Solenoid Valve |
|
Dual Flow Valve (solenoid valve)
1) Modern structure, beautiful configuration and zero leakage 2) Double - flow - volume setup (big and small), high discharge accuracy 3) Four connection modes available: flange, outer - thread, flange - outer - thread and inner - thread 4) Anti - explosion function for computerized dispensers. 5) Metric parameter: 20mm 6) Metric pressure: 0.35MPa 7) Flow rate: 0 - 60L/min 8) Rated voltage: VAC 220V |
|
Solenoid Valves and Pneumatic Control Valves
1) Working pressure: 0.15 - 0.8MPa. 2) Operating temperature: 5 ~ 50°C. 3) Voltage range: ±10%. 4) Power consumption: AC4.5V DC3W. 5) Insulation and protection class: F Class, IP65 |
|
Solenoid Valve
1) Body material: brass. 2) Operating type: normally closed. 3) Mode of action: 2/2-way, semi-direct lift type. 4) Sealing material: PTEF or Viton; NBR is standard. 5) Coil grade: class H, IP54 / IP65. 6) Suitable for applications with temperature below 120°C. 7) Reliable action under consistent pressure. 8) Connection pipe size: PT 1/2" - 2", flange 3/4" - 2" Product Group: Solenoid Valve |
|
Gas Emergency Shut Off Solenoid Valve
1) Nominal diameter: 15 - 50mm (thread), 65 - 400mm (flange). 2) Medium: coal gas, natural gas, liquefied petroleum gas. 3) Ambient temperature: -20 - 60°C. 4) Working pressure: 0 - 4 bars or 0 - 500m bar. 5) Sealing: NBR. 6) Valve body: casting steel, or casting aluminum. 7) Protection class: IP65. 8) Optional Explosion proof grade: ExmIIT4, ExdI/IIBT3/T4. 9) Response time: less than 3s. 10) Normally open and pulse type, the coil haven't electrify during working, does not consume electricity. 11) During emergency, the coil have a split second of electricity, the valve is closed and self-locked. With manual restoration function |
|
Solenoid Valves
1) Adopts integral slot throttle structure. 2) Structure type: guiding valve type. 3) Material: aluminum, stainless steel, nitric rubber. 4) Temperature: 0 - 80oC. 5) Working pressure: 0 - 1MPa. 6) Voltage: DC 24V, AC 24V / 110V / 220V (50 / 60Hz). 7) Level of protection: IP54. 8) Valve hole is processed with special high precision finishing technique. 9) Widely applied to pneumatic systems |
|
Diaphragm Solenoid Valve
Explanation: removing the coil before brazing the valve body and protect valve body with wet cloth and the body temperature should be under Installation: coil up-side, valve body upright. Working condition: Orifice: Φ7mm. Power: AC 220V, AC 110V, DC 24V, DC 12V. Voltage range: 85%-110%. Frequency: 50/60Hz. Rating power: 10W. Suitable medium: R22, R134a. Medium temperature: -30º C~+130º C. Environmental temperature: -20º C~+50º C. Interior leak: P=0. 5Mpa, Q≤10ml/min. Max. working pressure: 5.0Mpa. Life: 100, 000 times. Temperature rise of coil: ≤80K Product Group: Solenoid Valve |
|
High Temperature Solenoid Valve
1) GDF series high temperature solenoid valve is widely applied in such industries as scientific research, national defense, metallurgy, mechanism, chemical industry, light textile, power plant, petroleum, boat, and food. 2) Every part is made of high-temperature-resisting materials. 3) Can adjust automatically and remote control the working medium in the pipe system such as water, gas and oil with acid and alkali performance below 180°C |
|
Solenoid Valve
Solenoid Valve: 1) Patent certified & UL approval ; 2) Used in car seat for back supporting ; 3) 12VDC ; 4) 100mA or 350mA ; 5) Air Leakage: 1 c.c. max. at 1 minute in 4 PSI air pressure Product Group: Solenoid Valve |