 |
|
Fixed Wireless Terminal CDMA 1900MHZ FT7061NE/RE
Working Frequency Range: CDMA 1900MHZ 2000 1x RTT. Max. Output Power : <1W. Working Voltage : DC +8.4V. Idle current <30mA. Working current: 200~350mA. RX Sensitivity : -104dBm. Humidity : 0 ~ 95%. Battery: NI-MH BATTERY ,6 PCS. Min. Standby Time: >8 Hours. NET/Gross Weight: 700g/960g. Size: 180*180*42mm. AC Adapter Input: AC 110-240V 50-60HZ. AC Adapter Output: DC +12V. Antenna Type: BNC,TNC |
|
GSM/CDMA Fixed Wireless Terminal
Providing an interface between PBX/PABX landline and GSM/CDMA network, the fixed wireless terminal (FWT, also known as fixed cellular terminal, fixed cellular unit) enables users to get connected to GSM/CDMA network with normal dual band phones. By least-cost-routing, that is: automatically identify the numbers and route them to PSTN or GSM/CDMA network respectively, thus to cut costs of interconnection charges. It provides anti-polarity signal for billing meters. When connected with a fax machine, it can send and receive fax via GSM/CDMA network. In weak reception area, it works better than mobiles. Product Group: Wireless Terminal |
|
GSM / CDMA Fixed Wireless Terminal
GSM-PSTN ROUTER Supporting voice and data service, GSM-PSTN ROUTER can be connected to telephone and computer. It can also be connected to the PBX as a wireless trunk. GSM-PSTN ROUTER supports CLID, Call Restriction, Call Forward, Call waiting and Auto PIN entry for SIM card. It also supports line polarity reversal signal for billing which is widely used in payphone. One of main function is that GSM-PSTN ROUTER is also provide a interface for a fixed telephone line (PSTN) . It can receive from GSM or PSTN and make call to either of them. It determines the call type and directs the call to the corresponding phone service provider. That is, if you call a PTT number, it will make the call through the regular phone lines. If you call a GSM number, it will direct your call through the GSM company lines. Thus, your calls become cheaper, because calls made between the subscribers of the same operator have lower rates. Product Group: Wireless Terminal |
|
GSM Wireless Fax Terminal
1) Making & answering calls after connecting to telephone set. 2) Send/receive faxes through connecting to fax machine. 3) Available to connect with telephone set, PBX, billing machine, etc. 4) Available to connect with backup battery, and the stand-by time can reach 24 hours in case when the power is cut off. 5) Built-in PIN code protection featured with locking device/card/network. 6) Caller ID. 7) Optional to match with various high-gain antennas, featured with signal intensity indicator, Working status indicator, breakdown indicator, etc. 8) Supports the functions of redialing and hands-free. 9) Can proceed with setting up and modification of parameters through the phone set or PC |
|
Fixed Wireless Terminal
Features: 1) 900 and 1,800 GSM connectivity. 2) Simple to install and easy to maintain. 3) Allow PIN code entering and reciprocal phone-card lock. 4) Provide optimized circuit directly connecting the exchange device. 5) For extensions. 6) LCD with backlit screen. 7) Polarity reversal signal for metering. 8) 3.5dB gain antenna. 9) Compatible to PABX. 10) Suitable for call termination of ISP. 11) Incoming call reminder and time display Product Group: Wireless Terminal |
|
Fixed Wireless Terminal
Working frequency:450mhz. High-quality voice calls with 8kbps evrc. High speed data transmitting. Caller ID display. Support PC fax function. Support r-uim or rom-sim mode. Support caller ID display, call transfer, call forwarding, call waiting, call holding. Built-in antenna. Reliable and simple to operate of network system. Not need adjustment, easy to install and easy to maintain Product Group: Wireless Terminal |
|
Fixed Wireless Terminal
Spec: Applicable condition: 1)Temperature:-10~45degree. 2)Noises: not exceed 60dB(A). 3)Humidity:45%~95%. 4)Atmosphere pressure: 86~106KPa. 5)Alternating power Voltage :220V+/- 22V,frequency is 50Hz. 6)Receiver platform: DC 12V 1500mA. Technology parameter: 1)work frequency:850/1900MHz automatically switch. 2)power output :Max.2w(850MHz)/Min. 1W (1900MHz). 3)channel interval:200KHz. 4)receive sensitivity:<-100dBm. 5)frequency error:<=0.1ppm Product Group: Wireless Terminal |
|
GSM Fixed Wireless Terminal
Group 3 fax support(optional) ; Dynamic echo cancelation ; Network management support ; Caller line identification ; Intelligent call routing ; GSM/pstn bidirectional ; Call divert ; Pbx trunk connection or extension connection ; Gprs(rs-232 and rj-11 standard serial port equipped); External interface ; LED indicator ; Power supply, signal status, fax in use, fxs in use, status ; Antenna ; External antenna: GSM 900/1800 gain>2dbi ; Back plane interface ; Power supply ; Fax interface: Rj11 connects to regular telephone set. Product Group: Wireless Terminal |